Range of end feed copper fittings for use with copper tube to EN 1057. The 950513, 950514, 950501, 950503 & 950502 models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208817

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

CPS & date of manufacture MM/YY on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

237738, 237770, 950504, 950505, 950506, 950507, 950508, 950509, 953104 & 953105 Elbow 90 degree C X C: 8mm-108mm. 237740, 237769, 501657, 950510, 950511, 950512, 954699 & 954700 Street Elbow 90 degree Ftg X C: 8mm-108mm. 501643, 501764, 577336, 858891, 858892 & 858893 Street Elbow 45 degree Ftg X C: 8mm-108mm. 952608, 952609, 952610, 954695, 954696, 954697, 237739 & 237743 Elbow 45 degree C X C: 8mm-108mm. 954750 & 954751 Partial Crossover Ftg x C: 12mm-28mm. 954668, 954669 & 954670 Slip Straight Coupling C X C: 8mm-108mm. 237772, 237773, 950489, 950490, 950491, 950492, 950493, 950494, 953091, 953092 & 954675 Straight Coupling with groove C X C: 8mm-108mm. 237741, 799352, 950495, 950496, 953097, 953098, 954678, 954679, 954680, 954681, 954682, 954683, 954684, 954685, 954686, 954687, 954688, 954689, 954690, 908683, 908706 Fitting Reducer Ftg X C: 8mm-108mm. 950497, 953093, 953094, 953095, 953096, 953172 & 954691 Reducing Coupler C X C: 8mm-108mm and ½” - 1”. 237733, 237736, 950515, 950516, 950521, 950528, 950529, 953111, 953112 & 954713 Equal TEE CxCxC: 8mm-108mm. 237767,496119, 689717, 813643, 950517, 950518, 950519, 950520, 950522, 950523, 950526, 950527, 953169, 954717, 954719, 954720, 954721, 954722, 954723, 954724, 954727, 954728, 954729, 954730, 954732, 954733, 954734, 954735 & 954736 Reducing Tee CxCxC: 8mm-108mm. 237735, 237742, 945648, 950531, 952561, 953113, 953114, 954738, 954739 & 954740 Cap: 8mm-108mm. 953117 & 954749 Full Crossover C x C: 12mm-28mm. 909039 & 909054 Female Adapter C X C: 15mm x ½” NPT (F) - 54mm x 2” NPT (F). 952367 Return Bend Stop: 15mm-54mm. 909065, 909104, 950546 & 954776 Male Adapter C X C: 15mm x ½” NPT (M) - 54mm x 2” NPT (M). 954710 BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. 954745 & 954746 STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. 950513 & 950514 Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. 950501, 950503 & 950502 Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of electric instantaneous water heaters. The DEX and DCX models incorporate a spherical ball valve on the inlet. The CEX and DEX models incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet incorporates a strainer. Maximum working pressure 10 bar (DEX models only) All other models open outlet. Maximum operating temperature: ES3/4/5 and Zip Hydrotap G4/G5 ranges – 65ºC. CEX, DEX and DCX ranges - 70°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

2207038

Size:

ES, Zip HydroTap and CEX models - ½” BSP male inlet and outlet. DEX and DCX models- 3/8” BSP captive nut inlet and outlet that connects to a valve with a ½” BSP male inlet.

Marking:

Zip inline and Clage on front cover. Zip inline, model, Maximum temperature and pressure and technical information on label on body.

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

ES3 ES4 ES6 CEX CEX-U DEX12 NEXT DCX NEXT ZIP HydroTap G4 & G5 booster

Product Images

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Manufacturer:

Clage GmbH

Company Name

Clage GmbH

Address

PIROLWEG 1 5 21337 LUENEBURG GERMANY

General Email

View All Listings by this Company

‘Aquapoint APIII’ range of direct unvented under basin or over basin (wall mounted) electrically heated, enamel lined insulated steel storage cylinders. The cylinders are supplied with an expansion relief valve set at 6.0 bar. Maximum working pressure 5.5 bar. Maximum operating temperature 75°C.

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2209008

Size:

½” BSP (M) inlet and outlet.

Marking:

Zip Aquapoint on body. Zip Water, Aquapoint, capacity and other technical information on adhesive label on body.

Installation Requirements:

R001 R040

Expiry date:

30/09/2027

Model:

Under basin (models): AP3/05, AP3/10 & AP3/15. Over basin (wall mounted) models: AP3/05/OB, AP3/10/OB & AP3/15/OB. Where 05, 10 & 15 indicate capacity in litres.

Product Images

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Manufacturer:

Tiki Doo Stara Pazova

Company Name

Tiki Doo Stara Pazova

Address

Golubinacki Put 1B Stara Pazova 22300 Serbia

General Email

View All Listings by this Company

Varipoint range of unvented water heaters with copper bodies, fitted with a temperature & pressure relief valve (7.0 bar) and supplied with a pressure relief valve (6.0 bar). Maximum working pressure 5.5 bar. Maximum operating temperature 85°C.

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2209030

Size:

½” BSP male inlet and outlet.

Marking:

ZIP Varipoint and product info on adhesive label.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

VP103 – Varipoint II Overbasin 10ltr VP103UB – Varipoint II Underbasin 10ltr VP153 – Varipoint II Overbasin 15ltr VP153UB – Varipoint II Underbasin 15ltr

Product Images

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Brass fitting Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1478 Heater

Section Subtitle:

Combination boilers - accessories and components.

WRAS Approval Number:

2209322

Size:

10mm spigot (F) x 10mm spigot (M).

Marking:

Navien on body.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

LL1466-04-09 Connector.

Product Images

Approval Holder:

KD Navien

Company Name

KD Navien

Address

95, Suworam-gil Seotan-myeon Pyeongtaek-si Gyeonggi-do, Seoul

Country

Korea, Republic of

View All Listings by this Company

Manufacturer:

Zhejiang Double-Lin Valves Co. Ltd.

Company Name

Zhejiang Double-Lin Valves Co. Ltd.

Address

Yanpan Hardware Industrial Area, Ganjiang Town, Yuhuan

Country

China

Phone

+86-576-89915157

View All Listings by this Company