‘HydroDOS’ chlorine dioxide dosing system with PVC-u pipework and EPDM ‘O’-rings. The product incorporates a water meter, strainer, isolation valves and a drain cock with hose spigot. Maximum working pressure 6.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2011085

Size:

1” BSP (M) inlet/outlet

Marking:

Hydrodos, WRAS, model number and serial number on adhesive label inside unit

Installation Requirements:

R001 R120 R160 R170 R415 R511 R575

Expiry date:

30/11/2025

Model:

HydroDOS HD550G

Approval Holder:

Hydrotec International Water Treatment Limited

Company Name

Hydrotec International Water Treatment Limited

Address

38 Main Street Swords Country Dublin

Country

Ireland

View All Listings by this Company

ChloriDOS range of chemical blenders, consisting of a reaction chamber and pressure reducing valve inlet arrangement only. Maximum working pressure 8.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2010027

Note:

The approval covers the reaction chamber and inlet valve arrangement only.

Size:

½” BSP (F)

Marking:

Gaffey and pressure on back plate of pressure reducing valve. Gaffey on reaction chamber.

Installation Requirements:

R001 R008 R120 R160 R170 R415 R575

Expiry date:

31/10/2025

Model:

3050002 chloriDOS iOX 5g/h system, G005/P0/V1. 3050102 chloriDOS iOX 10g/h system, G010/P0/V1. 3050202 chloriDOS iOX 20g/h system, G020/P0/V1. 3050302 chloriDOS iOX 40g/h system, G040/P0/V1.

Product Images

Approval Holder:

Gaffey Technical Services Ltd.

Company Name

Gaffey Technical Services Ltd.

Postcode

BB5 6NT

Country

United Kingdom

Phone

01254 350 180

General Email

daniel@gaffeytechnology.com

View All Listings by this Company

Range of LK press fittings with brass bodies and stainless steel sleeves for use with LK Universal PEX pipe. Jointing is achieved by hydraulic compression. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011334

Size:

See model

Marking:

LK & product information on sleeve of fitting. LK & technical information on pipe.

Installation Requirements:

R001 R008

Expiry date:

30/11/2025

Model:

LK PE-X Universal Pipe X 188 23 35 - 16x2,0 & 188 25 41 - 20x2,5 LK PressPex Fittings 187 65 00 Straight fitting AX16 187 65 01 Straight fitting AX20 187 65 04 Straight fitting AX20xAX16 187 65 06 Straight fitting male AX16x½" 187 65 08 Straight fitting male AX20x¾" 187 65 13 Straight fitting fem AX16x½" 187 65 15 Straight fitting fem AX20x¾" 187 65 30 Elbow fitting 90° AX16 187 65 31 Elbow fitting 90° AX20 187 65 36 Elbow fitting male AX16x½" 187 65 38 Elbow fitting male AX20x¾" 187 65 41 Elbow fitting female AX16x½" 187 65 43 Elbow fitting female AX20x¾" 187 65 50 T-piece AX16 187 65 51 T-piece AX20 187 65 65 T-piece male thread AX16x½" 187 65 67 T-piece male thread AX20x¾" 187 65 73 T-piece female AX16x½" 187 65 75 T-piece female AX20x¾" 187 65 92 Cap AX16 187 65 93 Cap AX20 187 66 08 Pressfitting adapter ½" /AX16 187 66 06 Pressfitting adapter ¾"/AX16 187 66 05 Pressfitting adapter ½" /AX20 187 66 07 Pressfitting adapter ¾" /AX20 187 65 27 Straight fitting AX16x½" 187 65 25 Straight fitting AX20x¾" 295 07 Fitting for wallbox

Product Images

Approval Holder:

LK Systems

Company Name

LK Systems

View All Listings by this Company

Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011331

Size:

See model.

Marking:

DOZ and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

EPH_WSP19_1646 15mm x G1/2” Elbow. EPH_WSP19_2610 15mm x G1/2” Elbow. EPH_WSP19_2611 15mm x G1/2” Elbow. EPH_WSP19_1642 15mm x R1/2” Straight. EPH_WSP19_1645 15mm x G1/2” Straight. EPH_WSP19_1643 22mm x G3/4” Straight.

Product Images

Approval Holder:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Manufacturer:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Range of copper solder ring fittings for use with copper tube. For above and below ground use. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011048

Size:

8mm - 54mm.

Marking:

Manufacturer’s logo and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

F05 - Solder Ring Elbow. F01 - Solder Ring Coupling. F11 - Solder Ring Tee.

Product Images

Approval Holder:

Linhai Hengye Tubing Equipment Co Ltd

Company Name

Linhai Hengye Tubing Equipment Co Ltd

Address

Duqiao, Linhai, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Linhai Hengye Tubing Equipment Co Ltd

Company Name

Linhai Hengye Tubing Equipment Co Ltd

Address

Duqiao, Linhai, Zhejiang

Country

China

View All Listings by this Company