Range of brass fittings with compression connections to be used with copper pipes EN 1057. For above ground use only. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Bonfix on body. Bonfix, size & product info on compression nut.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Double straight fittings 82473 10 x 10 82537 12 x 12 82530 15 x 15 82851 18 x 18 82531 22 x 22 82532 28 x 28 82534 35 x 35 82535 42 x 42 82539 54 x 54 Male straight fitting 81103 3/8"x10 82543 3/8"x12 82740 3/8"x15 81113 1/2"x10 82528 1/2"x12 82741 1/2"x15 52491 1/2"x18 82529 1/2"x22 82742 3/4"x15 82492 3/4"x18 82743 3/4"x22 82556 3/4"x28 82744 1"x22 82745 1"x28 82474 5/4"x35 82548 3/2"x42 82549 2"x54 Female straight fitting 99029 3/8"x10 82586 3/8"x12 82575 3/8"x15 81217 1/2"x10 82748 1/2"x12 82581 1/2"x15 52574 1/2"x18 82577 1/2"x22 82749 3/4"x15 52750 3/4"x18 82582 3/4"x22 82585 1"x22 82583 1"x28 82475 5/4"x35 82588 3/2"x42 82589 2" x 54 Reduced straight fitting 82471 12 x 10 82538 15 x 10 82472 15 x 12 52746 18 x 15 82533 22 x 15 82536 28 x 22 82467 35 x 15 82468 35 x 22 SIDE Female TEE 82611 15 x 15 x 1/2" 82641 22 x 22 x 1/2" 82648 22 x 22 x 3/4" TEE ELBOW 82760 15 x 15 x 15 82763 22 x 15 x 15 82762 22 x 15 x 22 82761 22 x 22 x 22 TEE 82453 10x10x10 82452 12x12x12 82501 15x15x15 52871 18x18x18 82502 22x22x22 82503 28x28x28 82516 35x35x35 82517 42x42x42 82451 54x54x54 FEMALE TEE 99952 12x1/2"x12 82645 15x3/8"x15 82646 15x1/2"x15 82791 18x1/2"x18 82792 18x3/4"x18 82640 22x1/2"x22 82647 22x3/4"x22 82642 28x1/2"x28 82643 28x3/4"x28 REDUCED TEE 82454 12x15x12 82455 15x12x12 82456 15x12x15 82457 15x15x12 82504 15x22x15 82506 22x15x15 82505 22x15x22 82507 22x22x15 82519 22x28x22 82458 28x15x22 82508 28x15x28 82459 28x22x15 82513 28x22x22 82514 28x22x28 82509 28x28x15 82515 28x28x22 82476 35x15x35 82477 35x22x35 82478 35x28x35 SIDE M. TEE 82613 15x15x1/2" 82612 22x22x3/4" 82614 22x22x1" 82615 28x28x1"

DOUBLE ELBOW 82527 10x10 82526 12x12 82520 15x15 82861 18x18 82521 22x22 82522 28x28 82523 35x35 82524 42x42 82525 54x54 MALE ELBOW 82804 3/8" x 10 82701 3/8" x 12 82617 3/8" x 15 81811 1/2"x 10 82703 1/2" x 12 82700 1/2" x 15 52566 1/2" x 18 82709 1/2" x 22 82704 3/4" x 15 52862 3/4" x 18 82702 3/4" x 22 82705 3/4" x 28 82706 1 " x 22 82707 1 " x 28 82721 1"1/4x35 82722 1"1/2x42 82723 2"x54 FEMALE ELBOW 82404 3/8" x 10 82598 3/8" x 12 82605 3/8" x 15 82407 1/2" x 10 82596 1/2" x 12 82591 1/2" x 15 52863 1/2" x 18 82595 1/2" x 22 82482 3/4" x 15 52864 3/4" x 18 82592 3/4" x 22 82597 3/4" x 28 82594 1 " x 22 82593 1 " x 28 82559 1"1/4x35 82603 1"1/2x42 WALLPLATE ELBOW 52569 1/2" x 12 82570 1/2" x 15 82469 1/2" x 22 82572 3/4" x 15 82573 3/4" x 22 REDOUBLE ELBOW 82462 12 x 10 82461 15 x 10 82463 15 x 12 82464 22 x 15 82479 28 x 15 82481 28 x 22 ADAPTER ELBOW 84400 15 x 15u CROSS 82510 15 x 15 x 15 x 15 82511 22 x 22 x 22 x 22 82512 28 x 28 x 28 x 28 MALE CAP 82493 10 82494 12 82495 15 82496 22 82497 28 82498 35 CROSS R. 82518 22 x 15 x 22 x 15 82616 22 x 15 x 15 x 15 MALE WALLPLATE ELBOW 82571 3/4" x 15 MALE STRAIGHT FOR RAD. 82800 1/2""x15 DOUBLE ELBOW WITH VENT 82771 22 x 22 ELBOW FOR RAD 82790 1/2"x15

Approval Holder:

Bonfix B.V.

Company Name

Bonfix B.V.

Address

Holsteinstraat 4 8028 RT Zwolle (N1) The Netherlands

General Email

info@bonfix.nl

View All Listings by this Company

Range of brass compression fittings for use with copper pipes and Irish copper pipe (both manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: 32612, 32634, 32712 & 32734 models: 65°C. All other models: 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

250415020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Excel & size on compression nut

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

31012 1/2” Straight Coupler CxC 31034 3/4” Straight Coupler CxC 3101 1” Straight Coupler CxC 310114 11/4” Straight Coupler CxC 310112 11/2” Straight Coupler CxC 3102 2” Straight Coupler CxC 3103412 3/4"*1/2" Straight Coupler CxC 3101X12 1"*1/2" Straight Coupler CxC 310134 1"*3/4" Straight Coupler CxC 31011434 11/4"*3/4" Straight Coupler CxC 3101141 11/4"*1" Straight Coupler CxC 3101012 1/2"*10mm Straight Coupler CxC 3101212 1/2"*12mm Straight Coupler CxC 3101512 1/2"*15mm Straight Coupler CxC 3102234 3/4"*22mm Straight Coupler CxC 31012L 1/2"*1/2" Repair Coupling CXC 31034L 3/4"*3/4" Repair Coupling CXC 31112 1/2" Straight Coupler M.I. X C 31134 3/4"Straight Coupler M.I. X C 3111 1"Straight Coupler M.I. X C 311114 11/4"Straight Coupler M.I. X C 311112 11/2"Straight Coupler M.I. X C 3112 2"Straight Coupler M.I. X C 3111234 1/2"M*3/4"Straight Coupler M.I. X C 3113412 3/4"M*1/2"Straight Coupler M.I. X C 311134 1"M*3/4"Straight Coupler M.I. X C 311341 3/4"M*1"Straight Coupler M.I. X C 3111114 1"M*1.1/4"Straight Coupler M.I. X C 3111141 11/4"M*1"Straight Coupler M.I. X C 311112114 11/2"M*11/4"Straight Coupler M.I. X C 3112112 2"M*1 1/2"Straight Coupler M.I. X C 31212 1/2"Straight Coupler F.I. x C 31234 3/4"Straight Coupler F.I. x C 3121 1"Straight Coupler F.I. x C 312114 11/4"Straight Coupler F.I. x C 312112 11/2"Straight Coupler F.I. x C 3122 2"Straight Coupler F.I. x C 3121234 1/2"F*3/4"Straight Coupler F.I. x C 3123412 3/4"F*1/2"Straight Coupler F.I. x C 312134 1"F*3/4"Straight Coupler F.I. x C 312341 3/4"F*1"Straight Coupler F.I. x C 3121141 11/4"F*1"Straight Coupler F.I. x C 3121114 1“F*11/4"Straight Coupler F.I. x C 3122112 2“F*11/2"Straight Coupler F.I. x C 32612 1/2"Swivel Coupler F.I. x C 32634 3/4"Swivel Coupler F.I. x C 31512 1/2"Elbow C x C 31534 3/4"Elbow C x C 3151 1"Elbow C x C 315114 11/4"Elbow C x C 315112 11/2"Elbow C x C 3152 2"Elbow C x C 3153412 3/4"*1/2"Elbow C x C 315134 1"*3/4"Elbow C x C 3151512 1/2"*15mm Elbow C x C 3152234 3/4"*22mm Elbow C x C 31612 1/2" Elbow M.I. x C 31634 3/4"Elbow M.I. x C 3161 1"Elbow M.I. x C 316114 11/4"Elbow M.I. x C 316112 11/2"Elbow M.I. x C 3162 2"Elbow M.I. x C 3163412 3/4"M*1/2"Elbow M.I. x C 316134 1"M*3/4"Elbow M.I. x C 3161234 1/2"M*3/4"Elbow M.I. x C 316341 3/4"M*1"Elbow M.I. x C 31712 1/2" Elbow F.I. x C 31734 3/4"Elbow F.I. x C 3171 1"Elbow F.I. x C 317114 11/4"Elbow F.I. x C 317112 11/2"Elbow F.I. x C 3172 2"Elbow F.I. x C 3171234 1/2"F*3/4"Elbow F.I. x C 3173412 3/4"F*1/2"Elbow F.I. x C 317341 3/4"F*1"Elbow F.I. x C 317134 1"F*3/4"Elbow F.I. x C 317W12 1/2"F*1/2" Wallplate Elbow F.I. x C 317W34 3/4"F*3/4" Wallplate Elbow F.I. x C 317W1234 1/2"F*3/4" Wallplate Elbow F.I. x C 31812 1/2" Equal Tees CxCxC 31834 3/4" Equal Tees CxCxC 3181 1" Equal Tees CxCxC 318114 11/4" Equal Tees CxCxC 318112 11/2" Equal Tees CxCxC 3182 2" Equal Tees CxCxC 3181234 1/2"*1/2"*3/4"Reducing Tee C x C x C 3183412 3/4"*3/4"*1/2"Reducing Tee C x C x C 318341 3/4"*3/4"*1"Reducing Tee C x C x C 3181112 1"*1"*1/2"Reducing Tee C x C x C 3181134 1"*1"*3/4"Reducing Tee C x C x C 31811412 1 1/4"*1 1/4"*1/2"Reducing Tee C x C x C 31811434 1 1/4"*1 1/4"*3/4"Reducing Tee C x C x C 3181141 1 1/4"*1 1/4"*1"Reducing Tee C x C x C 31811234 1 1/2"*1 1/2"*3/4"Reducing Tee C x C x C 318112X1 1 1/2"*1 1/2"*1"Reducing Tee C x C x C 318112114 1 1/2"*1 1/2"*1 1/4"Reducing Tee C x C x C 318341234 3/4"*1/2"*3/4"Reducing Tee C x C x C 3181121 1"*1/2"*1"Reducing Tee C x C x C 3181X1234 1"*1/2"*3/4"Reducing Tee C x C x C 3181341 1"*3/4"*1"Reducing Tee C x C x C 318341212 3/4"*1/2"*1/2"Reducing Tee C x C x C 31813434 1"*3/4"*3/4"Reducing Tee C x C x C 31813412 1"*3/4"*1/2"Reducing Tee C x C x C 31811212 1"*1/2"*1/2"Reducing Tee C x C x C 318101012 10mm*10mm*1/2"Reducing Tee C x C x C 318121010 1/2"*10mm*10mm Reducing Tee C x C x C 318121012 1/2"*10mm*1/2"Reducing Tee C x C x C 318121210 1/2"*1/2"*10mm Reducing Tee C x C x C 32212 1/2" Cross CxCxCxC 32234 3/4"Cross CxCxCxC 3223412 3/4"*1/2"*1/2"*1/2"Cross CxCxCxC 32712 1/2" Swivel Elbow F.I. x C 32734 3/4" Swivel Elbow F.I. x C 33012 1/2"Tee CxCxF.I. 33034 3/4"Tee CxCxF.I. 3301 1"Tee CxCxF.I. 3303412 3/4"*3/4"*1/2"F Tee CxCxF.I. 330112 1"*1"*1/2"F Tee CxCxF.I. 330134 1"*1"*3/4"F Tee CxCxF.I. 3483412 3/4"*1/2" Reducing Set 348112 1"*1/2" Reducing Set 348134 1"*3/4" Reducing Set 34811412 11/4"*1/2" Reducing Set 34811434 11/4"*3/4" Reducing Set 3481141 11/4"*1" Reducing Set 34811212 11/2"*1/2" Reducing Set 34811234 11/2"*3/4" Reducing Set 3481121 11/2"*1" Reducing Set 348112114 11/2"*11/4" Reducing Set 348212 2"*1/2" Reducing Set 348234 2"*3/4" Reducing Set 34821 2"*1" Reducing Set 3482114 2"*11/4" Reducing Set 3482112 2"*11/2" Reducing Set 35012 1/2"Flanged Tank Connector with Backnut 35034 3/4"Flanged Tank Connector with Backnut 3501 1"Flanged Tank Connector with Backnut 350114 11/4"Flanged Tank Connector with Backnut 350112 11/2"Flanged Tank Connector with Backnut 3502 2"Flanged Tank Connector with Backnut 35112 1/2"Stop End 35134 3/4"Stop End 3511 1"Stop End 351114 11/4"Stop End 351112 11/2"Stop End 3512 2"Stop End 37212 1/2"Blank Cap and Washers 37234 3/4"Blank Cap and Washers 3721 1"Blank Cap and Washers 372114 11/4"Blank Cap and Washers 372112 11/2"Blank Cap and Washers 3722 2"Blank Cap and Washers 378A12 1/2"Coupling Nut 378A34 3/4"Coupling Nut 378A1 1"Coupling Nut 378A114 11/4"Coupling Nut 378A112 11/2"Coupling Nut 378A2 2"Coupling Nut 378B12 1/2"Compression Ring 378B34 3/4"Compression Ring 378B1 1"Compression Ring 378B114 11/4"Compression Ring 378B112 11/2"Compression Ring 378B2 2"Compression Ring

Approval Holder:

Excel Industries Ltd

Company Name

Excel Industries Ltd

Address

Coolmine Industrial Estate Clonsilla Road Dublin 15

Postcode

D15N704

Country

Ireland

Phone

+35 31811 8701

General Email

stephen.hope@excel-industries.com

View All Listings by this Company

‘Universal Transition Coupling (UTC)’ range of plastic compression fittings for use with the following pipe types and sizes: Stainless steel (manufactured to ASTM A554/ BS EN 10312): ¾”, 1” & 1¼”. Galvanised (EN 10255): ¾”, 1”, 1¼”, 1½” & 2”. Copper (BS EN 1057): 15mm, 22mm & 28mm. PVC (BS EN 1452): 20mm & 2”. ABS (BS 5391-1): 20mm, 25mm & 32mm. PE80 & PE100 pipe (to BS EN 12201): 20mm, 25mm, 32mm, 50mm & 63mm. For use above and below ground. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250402030

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Philmac, Universal Transition Fitting, size & date of manufacture (M/YY) on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

87113300 UTC Joiner 15-21mm x 15-21mm 87114300 UTC Joiner 21-27mm x 15-21mm 87114400 UTC Joiner 21-27mm x 21-27mm 87115300 UTC Joiner 27-34mm x 15-21mm 87115400 UTC Joiner 27-34mm x 21-27mm 87115500 UTC Joiner 27-34mm x 27-34mm 87116500 UTC Joiner 39-43mm x 27-34mm 87116600 UTC Joiner 39-43mm x 39-43mm 87117700 UTC Joiner 34-39mm x 34-39mm 87118800 UTC Joiner 47-49mm x 47-49mm 87119900 UTC Joiner 59-61mm x 59-61mm 87123100 UTC End Connector MI BSP 15-21mm x ½" 87123200 UTC End Connector MI BSP 15-21mm x ¾" 87123300 UTC End Connector MI BSP 15-21mm x 1" 87124200 UTC End Connector MI BSP 21-27mm x ¾" 87124300 UTC End Connector MI BSP 21-27mm x 1" 87124400 UTC End Connector MI BSP 21-27mm x 1¼" 87125200 UTC End Connector MI BSP 27-34mm x ¾" 87125300 UTC End Connector MI BSP 27-34mm x 1" 87125400 UTC End Connector MI BSP 27-34mm x 1¼" 87125500 UTC End Connector MI BSP 27-34mm x 1½" 87133300 UTC Tee 15-21mm 88103200 UTC x 3G Metric/Imperial Joiner 15-21 x 20/½" 88103300 UTC x 3G Metric/Imperial Joiner 15-21 x 25/¾" 88104200 UTC x 3G Metric/Imperial Joiner 21-27 x 20/½" 88104300 UTC x 3G Metric/Imperial Joiner 21-27 x 25/¾" 88105200 UTC x 3G Metric/Imperial Joiner 27-34 x 20/½" 88105300 UTC x 3G Metric/Imperial Joiner 27-34 x 25/¾" 88105400 UTC x 3G Metric/Imperial Joiner 27-34 x 32/1" 88106400 UTC x 3G Metric/Imperial Joiner 39-43 x 32/1" 88107400 UTC x 3G Metric/Imperial Joiner 34-39 x 32/1" 88108600 UTC x 3G Metric/Imperial Joiner 47-49 x 50/1½" 88108700 UTC x 3G Metric/Imperial Joiner 47-49 x 63/2" 88109700 UTC x 3G Metric/Imperial Joiner 59-61 x 63/2" 88153300 UTC x 3G Metric/Imperial Elbow 15-21 x 25/¾" 88154300 UTC x 3G Metric/Imperial Elbow 21-27 x 25/¾" 88154400 UTC x 3G Metric/Imperial Elbow 21-27 x 32/1" 88155300 UTC x 3G Metric/Imperial Elbow 27-34 x 25/¾" 88165300 UTC x 3G Metric/Imperial Elbow 27-34 x 32/1"

Manufacturer:

Philmac Pty Ltd.

Company Name

Philmac Pty Ltd.

Address

47-59 Deeds Road, North Plympton, SA 5037

Country

Australia

View All Listings by this Company

Range of brass press fittings for use with copper pipe (manufactured to EN1057:2006 and +A1:2010 Seamless round copper tube, R250 half hard). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250804703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Flowflex logo and size on body.

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

6090GM Female Elbow: 6090GM.15x½B. 6090GM.22x¾B. 6090GM.28x1B. 6092GM Male Elbow: 6092GM.15x½B. 6092GM.22x¾B. 6092GM.28x1B. 6130GM Female Tee: 6130GM.151215B. 6130GM.221222B. 6130GM.223422B. 6130GM.281228B. 6130GM.283428B. 6130GM.351235B. 6130GM.421242B. 6130GM.541254B 6240GM Swivel Connector: 6240GM.15x¾B. 6240GM.22x1B. 6240GM.28x l¼B. 6243GM Male Adaptor: 6243GM.15x½B. 6243GM.15x¾B. 6243GM.22x½B. 6243GM.22x1B. 6243GM.22x¾B 6243GM.28x1B 6243GM.28x¾B 6243GM.35x 1¼B. 6243GM.35x1B 6243GM.42x 1½B. 6243GM.54x2B. 6243GM.67x 2½B. 6243GM.76x3B. 6270GM Female Adaptor: 6270GM.15x½B. 6270GM.15x¾B. 6270GM.22x½B. 6270GM.22x1B. 6270GM.22x¾B. 6270GM.28x1B. 6270GM.28x¾B. 6270GM.35x 1¼B. 6270GM.35x1B. 6270GM.42x 1½B. 6270GM.54x2B 6341GM Male Union: 6341GM.15x½B. 6341GM.22x¾B. 6341GM.28x1B. 6472GM Wallplate Elbow: 6472GM.15x½B.

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Range of DZR brass push fit fittings for use with copper pipe (EN1057). Maximum working pressure 10.0 Bar. Maximum operating temperature 65 °C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250512018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

“IDC” logo & size on body.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

2PAA014 - Push-fit straight fitting 1/2”(14.7mm), 2PAA021 - Push-fit straight fitting 1/2”(14.7mm), 2PAB014 - Push-fit Elbow fitting 1/2”(14.7mm), 2PAB021 - Push-fit Elbow fitting 3/4”(21mm), 2PAC014 - Push-fit equal Tee fitting 1/2”(14.7mm), 2PAC021 - Push-fit equal Tee fitting 3/4”(21mm), 2PAD014 - Push-fit Stop End 1/2”(14.7mm), 2PAD021 - Push-fit Stop End 3/4”(21mm), 2PAE002 - Push-fit x Male straight adapter 1/2”(14.7mm) x 3/4”M, 2PAA121 - Push-fit Reduce straight adapter 3/4”(21mm) x 1/2”(14.7mm), 2PPA142 - Pushfit Straight Pushfit x Pipe 1/2”(14.7mm) x 3/4”(21mm), 2PAC221 - Push-fit Reduce Tee fitting 3/4”(21mm) x 3/4”(21mm) x 1/2”(14.7mm), 2PAC211 - Push-fit Reduce Tee fitting 3/4”(21mm) x 1/2”(14.7mm) x 1/2”(14.7mm), 2PAC212 - Push-fit Reduce Tee fitting 3/4”(21mm) x 1/2”(14.7mm) x 3/4”(21mm).

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company