Range of tap outlets with plastic bodies incorporating a filter within the body, incorporating a hollow fibre filter membrane. The inlet of the filter incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The filters are supplied with (and must be used with) a chrome plated brass adapter which incorporates a pastic flow regulator. Maximum operating temperature 60°C.

Section:

1050 Filters and Housings

WRAS Approval Number:

2206333

Note:

Open outlet use only.

Size:

90-001861: M22 (M) 90-001862: M22 (F)

Marking:

T-Safe (brand of Johs. Tandrup A/S) on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2027

Model:

02-831401 Medical Tap Filter Fixed Position 31 Day. 02-831402 Medical Tap Filter Fixed Position 31 Day, Sterile. 02-831403 Medical Tap Filter Fixed Position 62 Day. 02-831404 Medical Tap Filter Fixed Position 62 Day, Sterile. 02-831405 Medical Tap Filter Fixed Position 92 Day. 02-831406 Medical Tap Filter Fixed Position 92 Day, Sterile. Filters are to be installed with 90-001861 Fixed Position Tap Adapter, Gasket seal & 90-001862 Fixed Position Tap Adapter, O-ring seal.

Product Images

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107337

Size:

See model

Marking:

CUPRO-FIT & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

PRESS FIT 90° Elbow: PFEL15, PFEL22, PFEL28, PFEL35, PFEL42, PFEL54 PRESS FIT 90° Street Elbow: PFELS15, PFELS22, PFELS28, PFELS35, PFELS42, PFELS54 PRESS FIT 45° Elbow: PFEL1545, PFEL2245, PFEL2845, PFEL3545, PFEL4245, PFEL5445 PRESS FIT 45° Street Elbow: PFELS1545, PFELS2245, PFELS2845, PFELS3545, PFELS4245, PFELS5445 PRESS FIT Full Crossover PFFCO15, PFFCO22, PFFCO28 PRESS FIT Part Crossover PFPCO15, PFPCO22. PFPCO28 PRESS FIT Coupler&Slip Coupler PFCO15, PFCO22, PFCO28, PFCO35, PFCO42, PFCO54 PFSC15, PFSC22, PFSC28, PFSC35, PFSC42, PFSC54 PRESS FIT Equal Tee PFTE15, PFTE22, PFTE28, PFTE35, PFTE42, PFTE54 PRESS FIT Reducing TEE PFTE151522, PFTE 221515, PFTE 221522 PFTE 222215, PFTE 222228, PFTE 281515 PFTE 281522, PFTE 282215, PFTE 282222 PFTE 282228, PFTE 282815, PFTE 282822 PFTE 282835, PFTE 352222, PFTE 352235 PFTE 352822, PFTE 352828, PFTE 352835 PFTE 353515, PFTE 353522, PFTE 353528 PFTE 402828, PFTE 423535, PFTE 422842 PFTE 423542, PFTE 424215, PFTE 424222 PFTE 424228, PFTE 424235, PFTE 545415 PFTE 545428, PFTE 545435, PFTE 544242 PFTE 545442 PRESS FIT Fitting Reducer FTGXC PFRE2215, PFRE 2815, PFRE 2822, PFRE 3515 PFRE 3522, PFRE 3528, PFRE 4215, PFRE 4222 PFRE 4228, PFRE 4235, PFRE 5415, PFRE 5422 PFRE 5428, PFRE 5435, PFRE 5442 PRESS FIT Reducer Coupler CXC PFRC2215, PFRC 2815, PFRC 2822, PFRC 3515 PFRC 3522, PFRC 3528, PFRC 4215, PFRC 4222 PFRC 4228, PFRC 4235, PFRC 5415, PFRC 5422 PFRC 5428, PFRC 5435, PFRC 5442 PRESS FIT End Cap PFEC15, PFEC22, PFEC28, PFEC35, PFEC42, PFEC54

Approval Holder:

Cubralco Ltd.

Company Name

Cubralco Ltd.

Address

Ricketts Close, Firs Industrial Estate, Kidderminster, Worcestershire

Postcode

DY11 7QN

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107338

Size:

See model

Marking:

MF & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Copper Press Elbow: MCP16150000, MCP16220000, MCP16280000, MCP16350000, MCP16420000, MCP16540000 CU Press 90D Street Elbow: MCP97150000, MCP97220000, MCP97280000, MCP97350000, MCP97420000, MCP97540000 CU Press 45D Obtuse Elbow: MCP93150000, MCP93220000, MCP93280000, MCP93350000, MCP93420000, MCP93540000 CU Press 45D Street Elbow: MCP95150000, MCP95220000, MCP95280000, MCP95350000, MCP95420000, MCP95540000 CU Press Full Crossover MCP86150000, MCP86220000, MCP86280000 PRESS FIT Part Crossover MCP85150000, MCP85220000, MCP85280000 Copper Press Coupler& Slip Coupler MCP10150000, MCP10220000, MCP10280000, MCP10350000, MCP10420000, MCP10540000, MCP81150000, MCP81220000, MCP81280000, MCP81350000, MCP81420000, MCP81540000 Copper Press Equal Tee MCP20150000, MCP20220000, MCP20280000, MCP20350000, MCP20420000, MCP20540000 PRESS FIT Reducing TEE MCP20151522, MCP20221515, MCP20221522 MCP20222215, MCP20222228, MCP20281515 MCP20281522, MCP20282215, MCP20282222 MCP20282228, MCP20282815, MCP20282822 MCP20282835, MCP20352222, MCP20352235 MCP20352822, MCP20352828, MCP20352835 MCP20353515, MCP20353522, MCP20353528 MCP20402828, MCP20 423535, MCP20422842 MCP20423542, MCP20424215, MCP20424222 MCP20424228, MCP20 424235, MCP20545415 MCP20545428, MCP20545435, MCP20544242 MCP20545442 CU Press Fitt Reducer MCP92221500, MCP92281500, MCP92282200, MCP92351500 MCP92352200, MCP92352800, MCP92421500, MCP92422200 MCP92422800, MCP92423500, MCP92541500, MCP92542200 MCP92542800, MCP92543500, MCP92544200 PRESS FIT Reducer Coupler CXC MCP10221500, MCP10281500, MCP10282200, MCP10351500 MCP10352200, MCP10352800, MCP10421500, MCP10422200 MCP10422800, MCP10423500, MCP10541500, MCP10542200 MCP10542800, MCP10543500, MCP10544200 Copper Press End Cap MCP15150000, MCP15220000, MCP15280000, MCP15350000, MCP15420000, MCP15540000

Approval Holder:

Masterflow UK

Company Name

Masterflow UK

Address

Astley Park Estate, The Gatehouse, Kennedy Road, Astley, Manchester

Postcode

M29 7JY

View All Listings by this Company

Wavin range of Tigris K1 (plastic bodies) and M1 (brass bodies) press-fit fittings for use with Tigris PEX/AL/PE HD (50mm & 63mm) and Tigris PERT/AL/PERT WT (75mm) barrier pipes. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

2206029

Size:

Please refer to model.

Marking:

Pipes: Wavin, size, date of manufacture, EN ISO 21003 WRAS Tmax = 95°C/6Bar Fittings: Wavin & size on the crimp sleeve PPSU, W & size on the body

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Pipe: 3004372 Tigris PEX AL PE HD Pipe Barrier Pipe 3028271 Tigris PEX AL PE HD Barrier Pipe 3053971 Tigris PERT AL PE HD Barrier Pipe - from July 2022 this pipe will be known as 3053972 Tigris PERT AL PERT WT barrier pipe. Fittings Tigris K1 range: 3027832 Coupler 50mm x 50mm 3027847 Coupler 63mm x 63mm 3065639 Coupler 75mm x 75mm 3024667 Elbow 90° 50mm x 50mm 3027848 Elbow 90° 63mm x 63mm 3065643 Elbow 90° 75mm x 75mm 3027829 Tee- 50mm 3027853 Tee-63mm 3065644 Tee-75mm 3024668 Elbow 45° 50mm 3027849 Elbow 45° 63mm 3065642 Elbow 45° 75mm 3027830 Tee- Reduced 50mm x 25mm x 50mm 3027842 Tee-Reduced 50mm x 32mm x 50mm 3027831 Tee- Reduced 50mm x 40mm x 50mm 3027854 Tee-Reduced 63mm x 40mm x 63mm 3027855 Tee-Reduced 63mm x 32mm x 63mm 3027856 Tee-Reduced 63mm x 25mm x 50mm 3065645 Tee-Reduced 75mm x 50mm x 75mm 3065646 Tee-Reduced 75mm x 40mm x 75mm 3065647 Tee-Reduced 75mm x 32mm x 75mm 3027833 Coupler Reduced 50mm x 32mm 3027834 Coupler Reduced 50mm x 40mm 3027850 Coupler Reduced 63mm x 50mm 3027852 Coupler Reduced 63mm x 40mm 3065640 Coupler reduced 75mm x 63mm 3065641 Coupler reduced 75mm x 50mm 3027837 Connector (M) 50mm x 1 1/2" BSP Fittings Tigris M1 range: 4032698 Connector (F) 50mm x 1 1/2" BSP 4032699 Connector (F) 63mm x 2" BSP 4049179 Connector (F) 75mm x 2 1/2" BSP 4032567 Elbow 90° 50mm 4032568 Elbow 90° 63mm 4049172 Elbow 90° 75mm 4032658 Coupler 50mm 4032659 Coupler 63mm 4049168 Coupler 75mm 4032684 Connector (M) 50mm x 1 1/2" BSP 4032685 Connector (M) 63mm x 2" BSP 4049178 Connector (M) 75mm x 2 1/2" BSP

Product Images

Approval Holder:

Wavin Ltd.

Company Name

Wavin Ltd.

Address

Edlington Lane, Edlington Doncaster

Postcode

DN12 1BY

Country

United Kingdom

Phone

01709 856300

View All Listings by this Company

Manufacturer:

Wavin Ltd.

Company Name

Wavin Ltd.

Address

Edlington Lane, Edlington Doncaster

Postcode

DN12 1BY

Country

United Kingdom

Phone

01709 856300

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to EN 1057. The HLSRDPMFWT and HLSRDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208803

Size:

Solder ring: 8mm-54mm and ½” - 1” (see model). Threaded connections: 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

HLSR11ECC-a Elbow 90 degree C X C: 8mm-54mm. HLSR11ECC-b Street Elbow 90 degree Ftg X C: 8mm-54mm. HLSR11ECC-c Street Elbow 45 degree Ftg X C: 8mm-54mm. HLSR11ECC-d Street Elbow 45 degree Long Turn Ftg X C: 8mm-54mm. HLSR11ECC-e Elbow 45 degree C X C: 8mm-54mm. HLSR11ECC-f Elbow 45 degree Long Turn C X C: 8mm-54mm. HLSR11ECC-g Street Elbow 90 degree Long Turn Ftg X C: 8mm-54mm. HLSR11ECC-h Elbow 90 degree Long Turn C X C: 8mm-54mm. HLSR20CC-a Slip Straight Coupling C X C: 8mm-54mm. HLSR20CC-b Straight Coupling with dot C X C: 8mm-54mm. HLSR20CC-c Straight Coupling with groove C X C: 8mm-54mm. HLSR21RCC-a Fitting Reducer Ftg X C: 8mm-54mm. HLSR21RCC-b Reducing Coupler C X C: 8mm-54mm and ½”-1”. HLSR30TCC Equal TEE CxCxC: 8mm-54mm. HLSR31TRC Reducing Tee CxCxC: 8mm-54mm. HLSR40CAP Cap: 8mm-54mm. HLSRBGQW Partial Crossover Ftg x C: 12mm-28mm. HLSRGQW Full Crossover C x C: 12mm-28mm. HLSRYJWT Reducing Elbow 90 degree C X C: 15mm-54mm. HLSRZDWT BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLSRZDZT STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLSRDPMFWT Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. HLSRDPMFZT Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company