Four-hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling lockable diverter to shower outlet. The diverter outlet incorporates a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The product is supplied with a shower hose and handset. The shower handset inlet incorporates a stainless-steel strainer and a plastic flow regulator with an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The product is also supplied with ⅜" BSP (M) x ½" BSP (F) brass adapters for installation on each inlet hose, as well as stainless steel braided PEX lined flexible hose assemblies and stainless steel braided TPSiV lined flexible hose assemblies used as connecting hoses. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2207041

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜" captive nut end connections.

Marking:

DORNBRACHT on base of spout, base of operating member and diverter faceplate.

Installation Requirements:

R001 R006 R007 R009 R030

Expiry date:

31/07/2027

Model:

27632661 Meta Bath shower set

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Manufacturer:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of brass spout outlets with various finishes (see model). The products incorporate plastic flow straighteners. Maximum operating temperature 60.0°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2207037

Note:

Open outlet use only. Product to be installed with rough kit V758-IS-XX but is not supplied with product.

Size:

½” BSP (M)

Marking:

Samuel Heath on spout escutcheon

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

V746-1F-XX V746-1K-XX V746-2F-XX V746-2K-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Product Images

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:

1000 Expansion Vessels

WRAS Approval Number:

2207054

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

Please refer to model.

Marking:

CIMM, model, capacity, maximum operating pressure and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

AFE CE (35, 50, 60, 80, 100 & 150 Litres) Vertical: 10.0 Bar, 100°C, 1” BSP (M). AFE CE (200, 300, 450 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). AFESB CE (50, 60, 80, 100 & 150 Litres) Horizontal: 10.0 Bar, 100°C, 1” BSP (M). AFESB CE (200, 300 & 500 Litres) Horizontal: 10.0 Bar, 100°C, 1 ¼” BSP (M). SOLAR (8, 12, 16, 18 & 24 Litres): 10.0 Bar, 100°C, ¾” BSP (M). CAR 19 (162ml): 20.0 Bar, 100°C, ½” BSP (M). STYLE (0.5, 1, 2 & 3 Litres): 16.0 Bar, 100°C, ½” BSP (M). STYLE (4 & 5 Litres): 10.0 Bar, 100°C, ½” BSP (M). STYLE CE (6, 7 & 8 Litres): 10.0 Bar, 100°C, ½” BSP (M). STYLE CE (12, 15, & 18 Litres): 10.0 Bar, 100°C, ¾” BSP (M). AFE/CAR CE (35, 50, 60, 80, 100 & 150 Litres) Vertical: 16.0 Bar, 100°C, 1” BSP (M). AFE/CAR CE (200 & 300 Litres) Vertical: 16.0 Bar, 100°C, 1 ¼” BSP (M). ACS (1 & 2 Litres): 10.0 Bar, 100°C, ½” BSP (M). ACS (3, 4 & 5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). ACS CE (8, 12 & 16 Litres): 10.0 Bar, 100°C, ¾” BSP (M). ACS CE (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M). AFC (3 & 5 Litres): 8.0 Bar, 70°C, ¾” BSP (M). AFC CE (8, 12, 16, 18 & 24 Litres): 8.0 Bar, 70°C, ¾” BSP (M). AFC/CAR CE (8, 12, 18 & 24 Litres): 16.0 Bar, 100°C, ¾” BSP (M). AFOSB CE (20 & 24 Litres) Horizontal: 8.0 Bar, 100°C, 1” BSP (M). AF CE 24 (24 Litres): 8.0 Bar, 70°C, 1” BSP (M). AS CE 24 (24 Litres): 10.0 Bar, 100°C, 1” BSP (M). Models added September 2022: AFE CE (300, 450 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). AFESB CE (300 & 500 Litres) Horizontal: 10.0 Bar, 100°C, 1 ¼” BSP (M). AFE/CAR CE (200 & 300 Litres) Vertical: 16.0 Bar, 100°C, 1 ¼” BSP (M).

Product Images

Approval Holder:

CIMM SpA

Company Name

CIMM SpA

Address

Via Caprera, 13 Castello di Godego (TV)

Postcode

31030

Country

Italy

Phone

0039 0423 760009

General Email

info@cimmspa.com

View All Listings by this Company

Manufacturer:

CIMM SpA

Company Name

CIMM SpA

Address

Via Caprera, 13 Castello di Godego (TV)

Postcode

31030

Country

Italy

Phone

0039 0423 760009

General Email

info@cimmspa.com

View All Listings by this Company

Range of vertical expansion vessels with a butyl lining. Maximum working pressure 10 bar. Maximum operating temperature 70°C

Section:

1000 Expansion Vessels

Size:

½” BSP(M)

Marking:

Reflex, Reflex Winkelmann GmbH, Type, Internal Volume, Pressure, Temp, Date of Manufacture (YYYY) and other technical information.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Refix DE 0.65 ltr. Refix DE 1 ltr.

Product Images

Approval Holder:

Reflex Winkelmann GmbH

Company Name

Reflex Winkelmann GmbH

Address

Gersteinstrasse 19, D-59227 Ahlen

Country

germany

View All Listings by this Company

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:

1000 Expansion Vessels

WRAS Approval Number:

2207063

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

Please refer to model.

Marking:

Flamco, Airfix, model, capacity, maximum operating pressure and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

AIRFIX P 35, AIRFIX P 50, AIRFIX P 60, AIRFIX P 80, AIRFIX P 100 & AIRFIX P 150 (35, 50, 60, 80, 100 & 150 Litres) Vertical: 10.0 Bar, 100°C, 1” BSP (M). AIRFIX P 200, AIRFIX P 300 & AIRFIX P 500 (200, 300, 450 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). AIRFIX P 50 HAIRFIX 60 H, AIRFIX P 80 HAIRFIX P 100 H & AIRFIX P 150 H (50, 60, 80, 100 & 150 Litres) Horizontal: 10.0 Bar, 100°C, 1” BSP (M). AIRFIX P 200 H, AIRFIX P 300 H & AIRFIX P 500 H (200, 300 & 500 Litres) Horizontal: 10.0 Bar, 100°C, 1 ¼” BSP (M). AIRFIX P 2 (2 Litres): 10.0 Bar, 100°C, ½” BSP (M). AIRFIX P 3 & AIRFIX P 5 (3 & 5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). AIRFIX P 8, AIRFIX P 12 & AIRFIX P 16 (8, 12 & 16 Litres): 10.0 Bar, 100°C, ¾” BSP (M). AIRFIX P 18 & AIRFIX P 24 (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M). AIRFIX P 24 H (24 Litres) Horizontal: 8.0 Bar, 100°C, 1” BSP (M).

Approval Holder:

Flamco Limited

Company Name

Flamco Limited

Address

Washway Lane, St. Helens

Postcode

WA10 6PB

Phone

+44 (0) 1744 744 744

General Email

info@flamco.co.uk

View All Listings by this Company