'ELECTROCOAT BP 1119'. Factory applied, black coloured Bituminous Paint. Apply as per manufacturer's TDS Document No: 'ECL/ TDS / BP-1119-Bituminous Paint', Issue Date '10-Aug-20', Version No: '01'. Cure for 12 minutes at 45°C, followed by 10 hours at 28°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

240255033

Expiry date:

28/02/2029

Approval Holder:

Electrosteel Castings Ltd.

Company Name

Electrosteel Castings Ltd.

Address

30 B.T. Road, PO Sukchar, District 24 Parganas (N) West Bengal, Kolkata - 700115

Country

743179

View All Listings by this Company

'YJ-AL2O3 95%'. White coloured, dry pressed and sintered ceramic disc. For use with water up to 85°C.

Section:

5023 Ceramic

Expiry date:

31/01/2029

Approval Holder:

Shanghai YJ Cartridge Co., Ltd.

Company Name

Shanghai YJ Cartridge Co., Ltd.

Address

Building 17. No.615, Fengdeng Road, Malu Town, Jiading District, Shanghai

Country

China

View All Listings by this Company

'Rubalit A1896 Sealing Disc'. White coloured ceramic disc component manufactured by powder pressing, sintering and grinding. For use with water up to 85°C.

Section:

5023 Ceramic

Expiry date:

31/12/2028

Approval Holder:

CeramTec Etec GmbH

Company Name

CeramTec Etec GmbH

Address

An der Burg Sülz 17, 53797 Lohmar

Country

Germany

View All Listings by this Company

'JBG-SRPC Plus'. Factory applied, sulphate resisting Portland cement intended to line ductile iron pipes. Mix sand:cement:water in a 3:2:1 ratio and apply as per manufacturer's instructions 'JBIL/IFU-01' dated '29.01.2024'. Cure for 28 days@40°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2312554

Expiry date:

31/12/2028

Approval Holder:

Jai Balaji Industries Ltd

Company Name

Jai Balaji Industries Ltd

Address

Village Banskopa Rajbandh Durgapur-12 Burdwan

Country

India

View All Listings by this Company

'JBG-OPC Plus'. Factory applied, grey coloured, ordinary Portland cement intended to line ductile iron pipes. Mix sand:cement:water in a 3:2:1 ratio and apply as per manufacturer's instructions 'JBIL/IFU-01' dated '29.01.2024'. Cure for 28 days@40°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2312555

Expiry date:

31/12/2028

Approval Holder:

Jai Balaji Industries Ltd

Company Name

Jai Balaji Industries Ltd

Address

Village Banskopa Rajbandh Durgapur-12 Burdwan

Country

India

View All Listings by this Company