'61300 EPOXY TB BT BLEU 5005'. Factory applied, blue coloured epoxy powder coating. Spray apply as per manufacturers TDS dated '15/2/2019'. Cure for 20 minutes@160°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240755033

Expiry date:

31/07/2029

Approval Holder:

Inver Spa

Company Name

Inver Spa

Address

Vai Di Corticella 205, 40128 Bologna

Country

Italy

Phone

+39 051.6380.411 Fax: +39 051 6606888

View All Listings by this Company

'Sikagard® 1816 (formerly known MasterProtect® 1816)'. Site applied, grey coloured (once applied), two-component Epoxy polysulfide coating. Mix parts A & B in a 78:22 weight ratio and apply coat 1 as per manufacturer’s general method statement ‘MS - AD - Sikagard®-1816-01/2024’ and PDS '020303000000002044 Version 01.01', dated April 2024. Cure coat 1 for 9 hours@25°C. Mix parts A & B in a 78:22 weight ratio and apply coat 2 as per manufacturer’s general method statement ‘MS - AD - Sikagard®-1816-01/2024’ and PDS '020303000000002044 Version 01.01', dated April 2024. Cure coat 2 for 14 days@25°C. For use with water up to 23°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2307543

Expiry date:

31/07/2028

Approval Holder:

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Company Name

SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Address

Head Office: P.O. Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai

Country

United Arab Emirates

View All Listings by this Company

'GY-PEX-b(60-95)'. White coloured (translucent), extruded PEX hose. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

240755036

Expiry date:

31/07/2029

Approval Holder:

Xiamen Gangyuan Plastic Industry Co.,Ltd.

Company Name

Xiamen Gangyuan Plastic Industry Co.,Ltd.

Address

Third floor,1775 Jilong Road, Tongan District, Xiamen, Fujian

Country

China

View All Listings by this Company

'Amodel DW-1140 BK 938 & Amodel DW-1150 BK 938'. Black coloured, injection moulded PPA materials. For use with water up to 85°C.

Section:

5257 Polyphthalamides

Expiry date:

31/07/2029

Approval Holder:

Syensqo Specialty Polymers USA, LLC

Company Name

Syensqo Specialty Polymers USA, LLC

Address

4500 McGinnis Ferry Road, Alpharetta, Georgia 30005

Country

United States

View All Listings by this Company

'VULCAN VEE4 Bellow & Boot'. Black coloured, compression moulded EPDM bellows and boot components. Shore hardness 70. The bellows has an in-radius size of 3.0mm and the boot has an in-radius size of 0.9mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

240755041

Expiry date:

31/07/2029

Approval Holder:

Vulcan Engineering Limited

Company Name

Vulcan Engineering Limited

Address

The South West Centre, Troutbeck Road Sheffield

Postcode

S8 0JR

Country

United Kingdom

Phone

0114 2493333

General Email

spencer.reynolds@vulcanseals.com

View All Listings by this Company