‘MoyaProof WS2’. Site applied, grey coloured (once mixed), two-component, polymer modified Portland cement based cementitious waterproofing membrane. Mix Part A (white, opaque liquid) with Part B (grey, opaque powder) in a 1:4 mass ratio and apply two coats as per manufacturer’s Technical Datasheet ‘CC/MP05/Ver09/01/21’. Cure Coat 1 for 2 hours at 5˚C. Cure Coat 2 for 28 days at 5˚C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5055 Concrete, Cement and Mortar

Section Subtitle:

Waterproofers.

WRAS Approval Number:

2308508

Expiry date:

31/08/2028

Approval Holder:

Conmix Limited

Company Name

Conmix Limited

Address

City Gate Tower, Al Tawun, PO Box 5936, Sharjah

Country

United Arab Emirates

View All Listings by this Company

'Renderoc Plug 20'. Site applied, dark grey coloured, cementitious repair mortar. Mix with water in a 3:1 volume ratio and apply as per manufacturer's datasheet '14' dated 'June 2018'. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5063 Concrete, Cement and Mortar

Section Subtitle:

Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.

WRAS Approval Number:

2402500

Expiry date:

28/02/2029

Approval Holder:

Saint-Gobain Construction Chemicals UK Limited

Company Name

Saint-Gobain Construction Chemicals UK Limited

Address

Saint-Gobain House, East Leake, Loughborough, Leicestershire

Postcode

LE12 6JU

View All Listings by this Company

‘4158 – Discontinuous Aramtex® & lubricated PTFE’. White coloured, fibre packing material manufactured by braiding. For use with water up to 23°C. For use with water up to 23°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

2311502

Expiry date:

30/11/2028

Approval Holder:

Texpack Srl. Unipersonale

Company Name

Texpack Srl. Unipersonale

Address

Via Galileo Galilei, 24, 25030 Adro BS, Italy

View All Listings by this Company

'ForTii Ace WX51-FC BK00001, ForTii PA Xgea20 BK28049 & PA Xgea BK28049'. Black coloured, injection moulded PA 4T materials. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2307519

Expiry date:

31/07/2028

Approval Holder:

Envalior

Company Name

Envalior

Address

Flughafenstrasse 101, 40474 Dusseldorf

Country

Germany

View All Listings by this Company

‘Zytel® FG70G30HSR2 BK309’. Black coloured, injection moulded polyamide material. For use with water up to 23°C. From January 2024, the material is for use with water up to 60°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2308534

Expiry date:

31/08/2028

Approval Holder:

Celanese Sales Germany GmbH

Company Name

Celanese Sales Germany GmbH

Address

Am Unisys Park 1, 65843 Sulzbach am Taunus

Country

Germany

View All Listings by this Company