Concrete, Cement and Mortar

Section Code 5063 : Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.

Back To Directory Sections

#2102517

'Intercrete 4807'. Site applied, grey coloured cementitious repair mortar. Mix 'Intercrete 4807' and water in a mass ratio of 9.4:1 Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5063 Concrete, Cement and Mortar
Section Subtitle:
Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.
WRAS Approval Number:
2102517
Expiry date:
28/02/2026
Manufacturer:
Flexcrete Technologies Ltd.
Company Name
Flexcrete Technologies Ltd.
Address
Tomlinson Road, Leyland, Lancashire
Postcode
PR25 2DY
Phone
0845 2607005

View All Listings by this Company

Print This Approval


#2103565

'Monomix WS'. Site applied, grey coloured cementitious waterproof mortar. Mix powder and water in a mass ratio of 7.58:1. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5063 Concrete, Cement and Mortar
Section Subtitle:
Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.
WRAS Approval Number:
2103565
Expiry date:
31/03/2026
Manufacturer:
Flexcrete Technologies Ltd.
Company Name
Flexcrete Technologies Ltd.
Address
Tomlinson Road, Leyland, Lancashire
Postcode
PR25 2DY
Phone
0845 2607005

View All Listings by this Company

Print This Approval


#2109565

'Cementitious Coating 851 Grey'. Site applied, two part, grey coloured cementitious waterproof mortar which can be applied as a one-coat or two-coat system Mix liquid (Part A) and powder (Part B) in a weight ratio of 1:3.92 and apply as per manufacturer’s instructions 'Bulletin No.851 /031/012' dated July 2021. When using as a one-coat system cure for 21 days@7°C. When using as a two-coat system cure coat one for 1 hour@7°C and cure coat two for 21 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5063 Concrete, Cement and Mortar
Section Subtitle:
Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.
WRAS Approval Number:
2109565
Expiry date:
30/09/2026
Manufacturer:
Flexcrete Technologies Ltd.
Company Name
Flexcrete Technologies Ltd.
Address
Tomlinson Road, Leyland, Lancashire
Postcode
PR25 2DY
Phone
0845 2607005

View All Listings by this Company

Print This Approval


#2102551

'DiChem Tiestop'. Site applied, grey coloured cementitious repair mortar. Mix 'DiChem Tiestop' and water in a mass ratio of 9.4:1 and apply as per manufacturer's instructions 'Rev 4, 02.22'. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5063 Concrete, Cement and Mortar
Section Subtitle:
Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.
WRAS Approval Number:
2102551
Expiry date:
28/02/2026
Manufacturer:
Direct Chemicals Ltd.
Company Name
Direct Chemicals Ltd.
Address
Unit 6, Stokes Farm, Binfield Road, Wokingham
Postcode
RG40 5PR
Country
Berkshire
Phone
0118 989 2666

View All Listings by this Company

Print This Approval


#2109566

'Tiefill'. Site applied, grey coloured cementitious repair mortar. Mix Tiefill with water in a weight ratio of 9.4:1 and apply in accordance with manufacturer’s instructions for use 'bulletin no. TFILL/031/003, issued 'July 2020'. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5063 Concrete, Cement and Mortar
Section Subtitle:
Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.
WRAS Approval Number:
2109566
Expiry date:
30/09/2026
Manufacturer:
Flexcrete Technologies Ltd.
Company Name
Flexcrete Technologies Ltd.
Address
Tomlinson Road, Leyland, Lancashire
Postcode
PR25 2DY
Phone
0845 2607005

View All Listings by this Company

Print This Approval


#2402500

'Renderoc Plug 20'. Site applied, dark grey coloured, cementitious repair mortar. Mix with water in a 3:1 volume ratio and apply as per manufacturer's datasheet '14' dated 'June 2018'. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5063 Concrete, Cement and Mortar
Section Subtitle:
Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.
WRAS Approval Number:
2402500
Expiry date:
28/02/2029
Manufacturer:
Fosroc International Ltd.
Company Name
Fosroc International Ltd.
Address
Drayton Manor Business Park, Coleshill Road, Tamworth, Staffs.
Postcode
B78 3XN

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.