Directory Search Results

Print List

#2208802

Range of stainless steel braided HDPE lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
2208802
Size:
DN13 Bore diameter Connections: ¾” captive nut elbow, ¾” captive nut, ¾” BSP(M)
Marking:
UW KOTT-GLIDE®, DVGW, 90°C,10 bar, DN 13, GI ACS, KIWA, WRAS, NSF 61/9, Year of Production (YYYY) on crimp connector.
Installation Requirements:
R001
Expiry date:
31/08/2027
Model:
DN 13 xxxyz KOTT-Glide® xxx – length in millimeters, 300 mm up to 3000 mm y & z could be replaced by following for connections a – elbow G¾” Nut b – G¾” Nut c – ¾” Male Thread

Approval Holder:
Uniwell Rohrsysteme GmbH & Co. KG
Company Name
Uniwell Rohrsysteme GmbH & Co. KG
Address
Siegelfelderstrasse 1 Ebern
Postcode
96106
Country
Germany
Phone
+49 9531 9229 0
General Email
simone.mueller@uniwell.de

View All Listings by this Company
Manufacturer:
Uniwell Rohrsysteme GmbH & Co. KG
Company Name
Uniwell Rohrsysteme GmbH & Co. KG
Address
Siegelfelderstrasse 1 Ebern
Postcode
96106
Country
Germany
Phone
+49 9531 9229 0
General Email
simone.mueller@uniwell.de

View All Listings by this Company

Print This Approval


#2201027

Range of stainless-steel interlocked shower hoses (various finishes (see model) incorporating an EDPM liner and NBR washers. Maximum working temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2201027
Note:
Open outlet use only.
Size:
½" BSP captive nut inlet and outlet.
Marking:
Connection 1 (G1/2 Hexagon nut): Delmei, WRAS and year of manufacture (YYYY) on nut. Connection 3 (G1/2 External ‘O’-ring speaker connector): Delmei, WRAS and year of manufacture (YYYY) on conical nut. Connection 5 (G1/2 Full vertical wire connector): Delmei, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
Models: DH-A-B-CC-D 15cm-250cm A denotes inner diameter: 1 - 6-7mm, 2 - 7-8mm, 3- 7-9mm, 4- 10 -12mm, 5- 11 -12mm. B denotes core 1 brass, 2 stainless steel. C denotes connectors for each end: 1 G1/2 Hexagon nut, 2 G1/2 knurled nut, 3 G1/2 External ‘O’- ring speaker connector, 4 G1/2 knurled horn connector, 5 G1/2 Full vertical wire connector. PLEASE NOTE The product is not available with connection 2 or connection 4 at both ends, or combined, e.g. connection 2 at one end and connection 4 at the other. Connections 2 and 4 will always be provided with connections 1, 3 or 5 at the other end. D denotes surface finish: 1 CP, 2 MB, 3 BN, 4 EA, 5 ORB, 6 Imitation gold Example model code: DH -1-1-14-2 250cm DH shower hose with 6-7mm inner diameter, brass core, G1/2 Hexagon nut x G1/2 knurled horn connector, MB finish, 250cm length.
Product Images

Approval Holder:
Xiamen Delmei Sanitary Ware Co Ltd
Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company
Manufacturer:
Xiamen Delmei Sanitary Ware Co Ltd
Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company

Print This Approval


#2205029

Range of automatic air venting valves with DZR brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2205029
Marking:
RWC and DR mark on body.
Installation Requirements:
R001
Expiry date:
31/05/2027
Model:
ADMT503004: 15mm compression. ADMT503005: 22mm compression. ADMT503010: ¾” BSP (M).
Product Images

Approval Holder:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2206355

Wall mounted manual blending shower valve with a brass body (various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2206355
Note:
This approval does not include a shower hose and handset..
Size:
⅜” x ½” offset union.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2027
Model:
71602xxx HG Logis E shower mixer exposed. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2207008

Wall mounted, exposed, manual blending valve (chromium plated brass), incorporating a ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. The shower outlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Not supplied with hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2207008
Size:
¾” BSP male x ½” BSP male offset union
Marking:
Dornbracht on front of body
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2027
Model:
33300845 Lisse
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 507 of 1707

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.