Range of tap outlets with plastic bodies incorporating a filter within the body with a hollow fibre filter membrane The filters are supplied with (and must be used with) a chrome plated brass adapter which incorporates a plastic flow regulator. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2212320

Note:

Claims made by the manufacturer of performance have not been assessed and are not part of this approval

Size:

Please refer to model.

Marking:

T Safe logo, data matrix code, Model No and other tech info on body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

02-831200 Medical Tap Filter 92 Day, Standard Flow (19.33mm pushfit). 02-831201/02-831201CE Medical Tap Filter 92 Day, Laminar Flow (19.29mm pushfit). 02-831202 Medical Tap Filter 31 Day, Standard Flow (19.08mm pushfit). 02-831203/02-831203CE Medical Tap Filter 31 Day, Laminar Flow (19.34mm pushfit). 02-831204 Medical Tap Filter 92 Day, Standard Flow, Sterile Packed (19.33mm pushfit). 02-831205 Medical Tap Filter 92 Day, Laminar Flow, Sterile Packed (19.29mm pushfit). 02-831206 Medical Tap Filter 31 Day, Standard Flow, Sterile Packed (19.08mm pushfit). 02-831207 Medical Tap Filter 31 Day, Laminar Flow, Sterile Packed (19.34mm pushfit). Models added August 2024: 02-831210 Medical Tap Filter Side Mount 62 day LF (19.29mm pushfit). 02-831212 Medical Tap Filter Side Mount 62 day SF (19.33mm pushfit).

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

TP series 200 range of single stage pumps with electrocoated cast iron or bronze bodies, stainless steel impellers and EPDM ‘O’-rings. (TPE models are only available with electrocoated cast iron bodies). The products can incorporate the following shaft seal variations: BQQE (silicon carbide-silicon carbide) & BQBE (Silicon carbide-carbon). The TPE pumps are available with or without a sensor. Maximum working pressure 16.0 bar (TP and TPE40-XXX/2 and TP and TPE40 XXX/2 models). All other models 10.0 bar. Maximum operating temperature: Bronze models are 85°C, cast iron models are cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210908

Size:

TP(E)(D) 32: DN32 Flange (inlet/outlet), TP(E)(D) 40: DN40 Flange (inlet/outlet), TP(E)(D) 50: DN50 Flange (inlet/outlet), TP(E)(D) 65: DN65 Flange (inlet/outlet), TP(E)(D) 80: DN80 Flange (inlet/outlet) & TP(E)(D) 100: DN100 Flange (inlet/outlet).

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model, Product/Version number, technical info and manufacturing country on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2027

Model:

TP series 200 pumps: TP (E)(D) 32/40/50/65/80/100. Example Code: TP E D 40 -270 /2 S -A -F -A -BQQE -H C B Where: TP = Pump range. E = Electronically speed-controlled pump. D = Twin-head pump (optional). 40 = Nominal diameter of inlet and outlet ports (DN), 2 or 3 digits, value range 32/40/50/65/80/100. -270 = Maximum head [dm], 2 to 4 digits, value range from 30 to 390. /2 = Pole number (TP/TPE 40 models), one digit, value range 2/4. S = Code for sensor version: [Blank]: with MGE motor and without sensor, S: with factory-fitted differential-pressure sensor. A = Code for pump version. Can either be A, X, A+E, X+E. A: Basic Version, X: Special version, (+E): With certificate or test reports, the second character of the code for pump version is an "E". F = Code for pipe connection: DIN flange. A = Code for materials. Can either be A or Z. A: Basic version. Z: Bronze pump housing and motor stool. BQQE = Code for shaft seal including other plastic and rubber pump parts, except the neck ring. Can be BQQE (silicon carbide-silicon carbide) or BQBE (Silicon carbide-carbon). -H = Code for rated motor power [kW] - will be a letter or a number, please consult installation and operating instructions. C = Code for phase and voltage or other information [V] - will be a letter, please consult installation and operating instructions. B = Code for speed variant [rpm] - will be a letter or number, please consult installation and operating instructions.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Manufacturer:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of water pressure booster sets with a cold water storage cistern and booster pump. All models incorporate a non-return valve, not suitable for backflow protection. These models have an AG air gap suitable for fluid category 3 protection. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301305

Size:

½” BSP (M).

Marking:

Adhesive label on top of cistern stating - Stuart Turner, Model No, Serial number, Part No, Volume in litres and technical information.

Installation Requirements:

R001 R415 R270 R280

Expiry date:

31/01/2028

Model:

46711 iBoost V200 with cold water storage cistern and variable speed pump. 46668 iBoost F200 with cold water storage cistern and fixed speed pump.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of water pressure booster sets with a cold water storage cistern and booster pump. All models incorporate a non-return valve, not suitable for backflow protection. These models have an AB air gap suitable for fluid category 5 protection. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301357

Note:

R574 applies. The water in the storage cistern is considered wholesome.

Size:

½” BSP (M).

Marking:

Adhesive label on top of cistern stating - Stuart Turner, Model No, Serial number, Part No, Volume in litres and technical information.

Installation Requirements:

R001 R415 R270 R280 R570

Expiry date:

31/01/2028

Model:

46713 iBoost V200 CAT5 with cold water storage cistern and variable speed pump. 46677 iBoost F200 CAT5 with cold water storage cistern and fixed speed pump.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of shower handsets and shower heads with plastic bodies (chrome plated, except for the DS1200W and DS3200W models which are white) and NBR gaskets.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2301039

Note:

Open outlet use only.

Size:

Shower handsets: ½” BSP (M). Shower heads: ½” BSP (F).

Marking:

Shower handsets: Delmei on handle. Shower heads: Delmei on connector.

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

Shower handsets: Chrome plated body: DS3630C, DS3630W, DS3620C, DS3620W, DS1620C, DS1620W, DS1630C, DS1630W, DS3270, DS3290, DS1200C, DS3200C, DS1300C, DS1300W, DS3300C, DS3300W, DS1500C, DS1500W, DS3500C, DS3500W. White body: DS1200W, DS3200W. Where C or W denotes the shower face finish, and this can be replaced with either: C = Chrome, except for DS1200C and DS3200C which are grey., W = White. Shower Heads (chrome plated): SD1663, SD1664, SD1100, SD3700, SD3100, SD1700.

Approval Holder:

Xiamen Delmei Sanitary Ware Co Ltd

Company Name

Xiamen Delmei Sanitary Ware Co Ltd

Address

No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company

Manufacturer:

Xiamen Delmei Sanitary Ware Co Ltd

Company Name

Xiamen Delmei Sanitary Ware Co Ltd

Address

No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company