Range of Talbot pushfit fittings with polyprolylene or acetal bodies and EPDM o-rings for use with MDPE PE80 pipe (BS EN 12201). For use above and below ground use. Maximum working pressure 16 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310389

Size:

See models for pushfit fittings. Copper compression fittings – 15mm & 22mm for use with copper (EN1057).

Marking:

Talbot, size and pressure rating moulded on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Adaptor Male Thread - Type 1 Solid Body 20mm – 63mm: E6581; E6580; E6579; E6582; E9128; E3515; E3516; E10423. Adaptor Male Thread - Type 2 Cone and body 20mm – 32mm: E2729; E2371; E2732. Adaptor Female Thread - Type 1 Solid Body 20mm – 63mm: E11082; E5095; E3578; E5092; E5096; E3517; E8532; E6588; E8534; E8535; E8536. Adaptor Female Thread - Type 2 Cone and body 20mm – 32mm: E2730; E2735; E5094: E5098; E2736; E8625. Adaptor Female – Copper - Type 1 Solid Body 20mm for Above ground use ONLY: E4145. Adaptor Female – Copper - Type 2 Cone and Body 20mm - 25mm for Above ground use ONLY: E4147; E5182. Tank Connector - Type 1 Solid Body 25mm: E7248. Connector Body - Type 1 Solid Body 20mm – 63mm: E3520; E3521; E2831; E3522; E3523; E3995; E3524; E3525; E7283; E3996. Connector – Body Type 2 Cone and Body 20mm – 32mm: E2822; E2825; E2826; E2829; E2833. Equal Tee Connector - Type 1 Solid Body 20mm – 63mm: E3537; E3538; E3033; E3363; E3038; E3039; E3998; E3997. Equal Tee Connector - Type 2 Cone and Body 20mm – 32mm: E3032; E3037; E3042; E3036; E3040; E3041. Tee Connector P/f x F/Thread - Type 1 Solid Body 20mm – 63mm: E3035; E3043; E3044; E3045; E4355; E4356. Bend / Elbow Connector Body - Type 1 Solid Body 20mm – 63mm: E7734; E9010; E3518; E3519. Bend / Elbow Connector Body - Type 2 Cone and Body 20mm – 32mm: E2781; E2783; E2784. Elbow Connector Body P/F x F/Thread - Type 1 Solid Body 20mm – 63mm: E6151; E6152; E6153; E6154; E4353; E4354; E2787. Elbow Connector Body P/F x F/Thread - Type 2 Cone and Body 20mm – 32mm: E2782; E2789; 2788. Elbow Connector Body P/F x M/Thread - Type 1 Solid Body 25mm – 32mm: E4670; E4671. Stop End - Type 1 Solid Body 20mm – 63mm: E3364; E3365; E3366; E5097; E4375. Wall Plate Elbow - Type 1 Solid Body 20mm – 32mm: E2798; E2799; E2800. Repair Connector Straight - Type 1 Solid Body 20mm – 32mm: E7782; E7777; E7778.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

JG Speedfit range of push-fit fittings and manifolds for use with Polybutylene Barrier Pipe (manufactured to BS EN 7291-2:2010 ) and PEX Barrier Pipe (manufactured to BS EN 7291-3:2010) and Copper Pipe (manufactured to BS EN1057:). Operating parameters: 12.5 bar@20°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312020

Note:

R008 to applies to models 15PWB and CM551516W

Size:

10mm – 22mm push-fit. 5/8” push-fit & ¾” push-fit. ½” & ¾” BSP.

Marking:

John Guest logo and size on body

Installation Requirements:

R001 R008

Expiry date:

31/12/2028

Model:

FEMALE COUPLER TAP CONNECTOR BSP THREAD PSE3210W 10mm x 1/2" BSP FEMALE PSE3201W 15mm x 1/2" BSP FEMALE PSE3203W 15mm x 3/4" BSP FEMALE PSE3202W 22mm x 3/4" BSP FEMALE STOP END PSE4610W 10mm PSE4615W 15mm PSE4622W 22mm PSE4628W 28mm 4 WAY MANIFOLD SFM512210E 22 x 10mm 4 PORT RAIL MANIFOLD SFM522210E 22mm x 10mm SFM522215E 22mm x 15mm BACK PLATE ELBOW 15PWB: 15mm x 1/2" BSP BULKHEAD ELBOW CM551516W: 15mm x 3/4" BSP CONVERSION CONNECTOR: NC471: ½” ID (Imperial) x 15mm Push-fit NC2324: ¾” ID (Imperial) x 22mm Push-fit

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd

Company Name

Reliance Worldwide Corporation (UK) Ltd

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation (UK) Ltd

Company Name

Reliance Worldwide Corporation (UK) Ltd

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

‘AquaGas M range’ of copper and brass press fit fittings with NBR ‘O’-rings for use with copper tube (manufactured to BS EN 1057). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312074

Size:

15 - 54mm. ½” - 2” BSP (M)/(F).

Marking:

PCC GmbH logo (PC), DVGW, size and date of manufacture (YY-MM) on fitting body.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Press-Copper AquaGas M range: Brass (15-28mm) or Copper (35-54mm) fittings: 79010: Straight Male Adapter, 79020: Straight Female Adapter. Copper fittings: 79000: Straight Coupling, 79030: Straight Reducer, 79040: Slip Coupler, 79100: Equal Tee, 79110: Reduced Tee, 79120: Female Tee, 79200: Bend 90° ff, 79210: Bend 90° mf, 79230: Bend 45° ff, 79240: Bend 45° mf, 79410: End Cap, 79430: Male Reducer.

Approval Holder:

PCC GmbH

Company Name

PCC GmbH

Address

Dusseldorfer Strasse 15, D-71332 Wailblingen

Country

Germany

View All Listings by this Company

‘SharkBite’ range of brass push fit fittings incorporating an EPDM ‘O’-ring. For use with the following pipes: JG Speedfit Layflat Polybutylene Barrier Pipe (JG BPB pipe manufactured to BS EN 7291-2:2010), 'BPEX' Barrier Pipe (JG BPEX pipe manufactured to BS EN 7291-3:2010), Polybutylene barrier pipe (manufactured to BS EN 7291-2:2010), PEX barrier pipe (manufactured to BS EN 7291-3:2010) and Copper pipe (manufactured to BS EN1057:2006). Maximum working pressures and operating temperatures: When used with Polybutylene barrier pipes (manufactured to BS EN 7291-2:2010) and PEX barrier pipes (manufactured to BS EN 7291-3:2010): 12.5 bar, cold water use only. 6.0 bar @ 95°C. When used with copper pipe (manufactured to BS EN1057:2006): 10mm sizes: Maximum working pressure 16.0 bar. Cold water use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C. 15-22mm sizes: Maximum working pressure 20.0 bar. Cold water use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C. 28mm size added April 2024: Maximum working pressure 20.0 bar. Cold water use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240204043

Size:

See models.

Marking:

Fittings: Sharkbite (brand of Reliance Worldwide Corporation (UK) Ltd.), Sharkbite logo, CR, size and SXXXX (where XXXX = date of manufacture WWYY). Pipe: John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), material type, class, size, pressure, temperature and means of identification including date of manufacture (WWYY/xxxx/xxxx). Pipe inserts: John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.).

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

SHARKBITE EQUAL STRAIGHT COUPLINGS: SB0110: 10mm SB0115: 15mm SB0122: 22mm SB0128: 28mm SHARKBITE REDUCING STRAIGHT COUPLING: SB011510: 15mm x 10mm SB012215: 22mm x 15mm SB012822: 28mm x 22mm SHARKBITE SLIP COUPLING: SB0115S: 15mm SB0122S: 22mm SB0128S: 28mm SHARKBITE 90° EQUAL ELBOW: SB0210: 10mm SB0215: 15mm SB0222: 22mm SB0228: 28mm SHARKBITE 45° EQUAL ELBOW: SB0515: 15mm SB0522: 22mm SB0528: 28mm SHARKBITE 90° STREET ELBOW: SB0215ST: 15mm SB0222ST: 22mm SB0228ST: 28mm SHARKBITE 45° STREET ELBOW: SB0515ST: 15mm SB0522ST: 22mm SB0528ST: 28mm SHARKBITE 90° MALE ELBOW: SB121515M: 15mm SB122220M: 22mm SHARKBITE 90° FEMALE ELBOW: SB121515F: 15mm x 1/2” BSP SHARKBITE 90° FEMALE ELBOW WITH BACK PLATE: SB121515FBP: 15mm x 1/2” BSP SHARKBITE EQUAL TEE: SB0310: 10mm SB0315: 15mm SB0322: 22mm SB0328: 28mm SHARKBITE SLIP TEE: SB0315S: 15mm SB0322S: 22mm SB0328S: 28mm SHARKBITE FEMALE BRANCH TEE: SB03151515F: 15mm x 15mm x 1/2” BSP SHARKBITE REDUCED BRANCH TEE: SB03222210: 22mm x 22mm x 10mm SB03222215: 22mm x 22mm x 15mm SB03282815: 28mm x 28mm x 15mm SB03282822: 28mm x 28mm x 22mm SHARKBITE REDUCED RUN TEE: SB03221522: 22mm x 15mm x 22mm SHARKBITE REDUCED RUN AND BRANCH TEE: SB03221515: 22mm x 15mm x 15mm SB03282222: 28mm x 22mm x 22mm SHARKBITE MALE CONNECTOR TAPERED THREAD: SB111515MT: 15mm x 1/2” BSPT SB112220MT: 22mm x 3/4” BSPT SB112825MT: 28mm x 1” BSPT SHARKBITE MALE CONNECTOR PARALLEL THREAD: SB111515MP: 15mm x 1/2” BSP SB112220MP: 22mm x 3/4” BSP SB112825MP: 28mm x 1” BSP SHARKBITE MALE TANK CONNECTOR PARALLEL THREAD: SB111515MTC: 15mm x 1/2” BSP SB112220MTC: 22mm x 3/4” BSP SHARKBITE FEMALE CONNECTOR PARALLEL THREAD: SB111515F: 15mm x 1/2” BSP SB112220F: 22mm x 3/4” BSP SB112825F: 28mm x 1” BSP SHARKBITE TAP CONNECTORS: SB141515: 15mm x 1/2” BSP SB142220: 22mm x 3/4” BSP SHARKBITE TAP CONNECTOR ELBOW: SB141515E: 15mm x 1/2” BSP SHARKBITE END STOP: SB0410: 10mm SB0415: 15mm SB0422: 22mm SB0428: 28mm SHARKBITE STRAIGHT REDUCING TAILS: SB211510: 15mm x 10mm SB212215: 22mm x 15mm SB212815: 28mm x 15mm SB212822: 28mm x 22mm SHARKBITE SINGLE BRANCH MANIFOLD TEE: SB01221022ST: 22mm x 22mm x 10mm SHARKBITE DOUBLE BRANCH MANIFOLD TEE: SB0122101022ST: 22mm x 22mm x 10mm x 10mm

PIPE INSERTS: TSM10N: 10mm TSM15N: 15mm TSM22N: 22mm TSM28N: 28mm WHITE POLYBUTYLENE BARRIER PIPE (COILS ONLY): 10BPB-25C: 10mm x 25M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-50C: 10mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-100C: 10mm x 100M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-25C: 15mm x 25M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-50C: 15mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-85C: 15mm x 85M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-100C: 15mm x 100M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-120C: 15mm x 120M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-150C: 15mm x 150M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-300C: 15mm x 300M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-25C: 22mm x 25M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-50C: 22mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 28BPB-50C: 28mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE WHITE PEX BARRIER PIPE (COILS): 10BPEX-25C: 10mm x 25M COIL WHITE PEX BARRIER PIPE 10BPEX-50C: 10mm x 50M COIL WHITE PEX BARRIER PIPE 10BPEX-100C: 10mm x 100M COIL WHITE PEX BARRIER PIPE 15BPEX-25C: 15mm x 25M COIL WHITE PEX BARRIER PIPE 15BPEX-50C: 15mm x 50M COIL WHITE PEX BARRIER PIPE 15BPEX-100C: 15mm x 100M COIL WHITE PEX BARRIER PIPE 15BPEX-120C: 15mm x 120M COIL WHITE PEX BARRIER PIPE 15BPEX-150C: 15mm x 150M COIL WHITE PEX BARRIER PIPE 22BPEX-25C: 22mm x 25M COIL WHITE PEX BARRIER PIPE 22BPEX-50C: 22mm x 50M COIL WHITE PEX BARRIER PIPE WHITE PEX BARRIER PIPE (LENGTHS): 15BPEX-20X2L: 15mm x 2M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X3L: 15mm x 3M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X6L: 15mm x 6M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X2L: 22mm x 2M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X3L: 22mm x 3M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X6L: 22mm x 6M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X3L: 28mm x 3M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X6L: 28mm x 6M LENGTHS WHITE PEX BARRIER PIPE

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd

Company Name

Reliance Worldwide Corporation (UK) Ltd

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of Redman fittings with mild steel bodies (polyamide coating) for use with Radius Systems Puriton Light Blue Barrier Pipe [Type A, BS8588] & Puriton Dark Blue Barrier Pipe [Type A, BS8588]. For above and below ground and cold-water use. Jointing is achieved by hydraulic compression. Maximum working pressures: 12.5 Bar for 63mm SDR 11 PE80 pipe system, 10.0 Bar for 90mm to 180mm SDR 17 PE100 pipe system, 16.0 bar for 90mm to 180mm SDR 11 PE100 pipe system. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240202059

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model list below;

Marking:

Radius logo, Size, Part number and batch code on outer shell. Radius logo, size on adhesive label on body.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

Maximum working pressure 10.0 bar: Coupler comprising outer shell & straight insert for SDR 17 Pipe: RE0009: 90mm SDR 17 REDMAN Coupler, RE0010: 110mm SDR 17 REDMAN Coupler, RE0005: 125mm SDR 17 REDMAN Coupler, RE0007: 160mm SDR 17 REDMAN Coupler, RE0047: 180mm SDR 17 REDMAN Coupler. Coupler comprising 2 outer half shells and straight insert for SDR 17 Pipe: RE0067: 90mm SDR 17 REDMAN Repair Coupler, RE0069: 110mm SDR 17 REDMAN Repair Coupler, RE0071: 125mm SDR 17 REDMAN Repair Coupler, RE0078: 160mm SDR 17 REDMAN Repair Coupler, RE0080: 180mm SDR 17 REDMAN Repair Coupler. 45° bend comprising 2 outer half shells and 45° insert for SDR 17 Pipe: RE0034: 90mm SDR 17 REDMAN 45° Elbow, RE0036: 110mm SDR 17 REDMAN 45° Elbow, RE0038: 125mm SDR 17 REDMAN 45° Elbow, RE0040: 160mm SDR 17 REDMAN 45° Elbow, RE0045: 180mm SDR 17 REDMAN 45° Elbow. 90° bend comprising 2 outer half shells and 90° insert for SDR 17 Pipe: RE0013: 90mm SDR 17 REDMAN 90° Elbow, RE0015: 110mm SDR 17 REDMAN 90° Elbow, RE0017: 125mm SDR 17 REDMAN 90° Elbow, RE0019: 160mm SDR 17 REDMAN 90° Elbow, RE0021: 180mm SDR 17 REDMAN 90° Elbow, Flange Adaptor comprising outer shell and DN flanged insert for SDR 17 pipe EN1092 NP16 drilling: RE0075: 90mm x DN80 SDR 17 REDMAN Flange Adaptor, RE0077: 110mm x DN100 SDR 17 REDMAN Flange Adaptor, RE0079: 125mm x DN100 SDR 17 REDMAN Flange Adaptor, RE0081: 160mm x DN150 SDR 17 REDMAN Flange Adaptor, RE0089: 180mm x DN150 SDR 17 REDMAN Flange Adaptor. Maximum working pressure 16.0 bar: Coupler comprising outer shell & straight insert for SDR 11 Pipe: RE0002: 90mm SDR 11 REDMAN Coupler, RE0003: 110mm SDR 11 REDMAN Coupler, RE0004: 125mm SDR 11 REDMAN Coupler, RE0008: 180mm SDR 11 REDMAN Coupler. Coupler comprising 2 outer half shells and straight insert for SDR 11 Pipe: RE0064: 90mm SDR 11 REDMAN Repair Coupler, RE0066: 110mm SDR 11 REDMAN Repair Coupler. 45° bend comprising 2 outer half shells and 45° insert for SDR 11 Pipe: RE0033: 90mm SDR 11 REDMAN 45° Elbow, RE0035: 110mm SDR 11 REDMAN 45° Elbow. 90° bend comprising 2 outer half shells and 90° insert for SDR 11 Pipe: RE0012: 90mm SDR 11 REDMAN 90° Elbow, RE0014: 110mm SDR 11 REDMAN 90° Elbow. Flange Adaptor comprising outer shell and DN flanged insert for SDR 11 pipe EN1092 NP16 drilling: RE0074: 90mm x DN80 SDR 11 REDMAN Flange Adaptor, RE0076: 110mm x DN100 SDR 11 REDMAN Flange Adaptor, RE0084: 125mm x DN100 SDR 11 REDMAN Flange Adaptor, RE0087: 180mm x DN150 SDR 11 REDMAN Flange Adaptor Models added July 2024: RE0001 63mm REDMAN Coupler SDR 11, RE0065 63mm REDMAN Repair Coupler SDR 11, RE0032 63mm REDMAN Elbow 45° SDR11, RE0011 63mm REDMAN Elbow 90° SDR 11, RE0073 63 x dn50 REDMAN Flange Adaptor SDR 11, RE0083 63mm x dn80 REDMAN Flange adaptor SDR11.

Approval Holder:

Radius Systems Limited

Company Name

Radius Systems Limited

Address

Radius House, Berristow Lane, South Normanton, Alfreton, Derbyshire

Postcode

DE55 2JJ

Country

United Kingdom

Phone

01773582303

General Email

richard.marks@radius-systems.com

View All Listings by this Company

Manufacturer:

Radius (China) Piping Systems Company Limited.

Company Name

Radius (China) Piping Systems Company Limited.

Address

53 Huihe Road Dongying Economic and Technological Development Zone Shandong Province

Country

China

General Email

View All Listings by this Company

IDC ‘BDGxxx’ range of press fittings with brass or nickel plated brass bodies (see model) incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). The BDG241 and BDG257 prefix models incorporate an EPDM gasket on the captive nut end connection. Pressfit jointing is achieved by either a U or TH crimping profile. Compression connections are for use with copper pipe 12-28mm (manufactured to EN1057) or Irish copper pipe 14.7-27.4mm (manufactured to EN1057). For above ground use only. Maximum working pressure 10.0 bar. 20, 25 & 26mm pressfit sizes cold water use only. Threaded, compression and 16 & 32mm pressfit sizes maximum operating temperature 95°C. From June 2025: The 20, 25 & 26mm pressfit sizes (TH profile only) maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404712

Size:

Pressfit: 16, 20, 25, 26 & 32mm. Compression: 12mm, 14.7mm, 15mm, 18mm, 21mm, 22mm, 27.4mm & 28mm. Threaded: ⅜”, ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (U or TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Models include a suffix to denote profile and whether brass or nickel plated. -U = brass with U profile. -TH = brass with TH profile. -P-U = nickel plated brass with U profile. -P-TH = nickel plated with TH profile. BDG245 - Straight PEX x PEX (press x press): BDG2450101: 16mm x 16mm, BDG2450301: 20mm x 20mm, BDG2450401: 25mm x 25mm, BDG2450501: 26mm x 26mm, BDG2450601: 32mm x 32mm. BDG244 - Reduce Straight PEX x PEX (press x press): BDG2440101: 20mm x 16mm, BDG2440201: 25mm x 16mm, BDG2440301: 26mm x 16mm, BDG2440601: 25mm x 20mm, BDG2440701: 26mm x 20mm, BDG2440800: 32mm x 16mm, BDG2440702: 32mm x 20mm, BDG2440802: 32mm x 26mm. BDG242 - Straight PEX x Male (press x male): BDG2420101: 16mm x 3/8"M, BDG2420201: 16mm x 1/2"M, BDG2420202: 16mm x 3/4"M, BDG2420501: 20mm x 1/2"M, BDG2420601: 20mm x 3/4"M, BDG2420602: 20mm x 1"M, BDG2420701: 25mm x 3/4"M, BDG2420702: 25mm x 1"M, BDG2420802: 26mm x 1/2"M, BDG2420803: 26mm x 3/4"M, BDG2420804: 26mm x 1"M, BDG2420900: 32mm x 3/4"M, BDG2420901: 32mm x 1"M. BDG243 - Straight PEX x Female (press x female): BDG2430100: 16mm x 3/8"F, BDG2430101: 16mm x 1/2"F, BDG2430102: 16mm x 3/4"F, BDG2430301: 20mm x 1/2"F, BDG2430401: 20mm x 3/4"F, BDG2430402: 20mm x 1"F, BDG2430501: 25mm x 3/4"F, BDG2430601: 25mm x 1"F, BDG2430701: 26mm x 3/4"F, BDG2430801: 26mm x 1"F, BDG2430901: 32mm x 1"F. BDG246 - Stop end (press): BDG246001: 16mm, BDG246003: 20mm, BDG246004: 25mm, BDG246005: 26mm, BDG246006: 32mm. BDG253 - Straight Compression x PEX (compression x press): BDG2530400: 12mmC x 16mm, BDG2530401: 15mmC x 16mm, BDG2530403: 15mmC x 20mm, BDG2530503: 18mmC x 20mm, BDG2530504: 18mmC x 25mm, BDG2530603: 22mmC x 20mm, BDG2530803: 28mmC x 20mm, BDG2530804: 28mmC x 25mm, BDG2530805: 28mmC x 26mm, BDG2530806: 28mmC x 32mm, BDG2531401: 1/2"C x 16mm, BDG2531603: 3/4"C x 20mm, BDG2531605: 3/4"C x 26mm, BDG2531805: 1"C x 26mm, BDG2531806: 1"C x 32mm. BDG241 - Tap connector PEX x Swivel Female (press x captive nut female): BDG2410101: 16 x 3/8"F, BDG2410201: 16 x 1/2"F, BDG2410202: 16 x 3/4"F, BDG2410501: 20 x 1/2"F, BDG2410601: 20 x 3/4"F, BDG2410701: 25 x 3/4"F, BDG2410801: 25 x 1"F, BDG2410803: 26 x 3/4"F, BDG2410804: 26 x 1"F, BDG2410901: 32 x 1"F. BDG249 - Elbow (press): BDG2490101: 16mm, BDG2490201: 20mm, BDG2490301: 25mm, BDG2490401: 26mm, BDG2490501: 32mm. BDG449 - Elbow 45° (press): BDG4490301: 25mm, BDG4490401: 26mm, BDG4490501: 32mm. BDG256 - Elbow PEX x Male (press x male): BDG2560103: 16mm x 3/8"M, BDG2560104: 16mm x 1/2"M, BDG2560106: 16mm x 3/4"M, BDG2560304: 20mm x 1/2"M, BDG2560306: 20mm x 3/4"M, BDG2560308: 20mm x 1"M, BDG2560406: 25mm x 3/4"M, BDG2560408: 25mm x 1"M, BDG2560506: 26mm x 3/4"M, BDG2560508: 26mm x 1"M, BDG2560608: 32mm x 1"M. BDG247 - Elbow PEX x Female (press x female): BDG2470100: 16mm x 3/8"F, BDG2470101: 16mm x 1/2"F, BDG2470102: 16mm x 3/4"F, BDG2470301: 20mm x 1/2"F, BDG2470302: 20mm x 3/4"F, BDG2470303: 20mm x 1"F, BDG2470401: 25mm x 3/4”F, BDG2470402: 25mm x 1”F, BDG2470501: 26mm x 3/4"F, BDG2470502: 26mm x 1"F, BDG2470600: 32mm x 3/4"F, BDG2470601: 32mm x 1"F. BDG248 - Wall Plate PEX x Female (press x female): BDG2480101: 16 x 1/2"F, BDG2480301: 20 x 1/2"F, BDG2480401: 20 x 3/4"F, BDG2480402: 25x 3/4"F, BDG2480403: 25 x 1"F, BDG2480501: 26 x 3/4"F, BDG2480502: 26 x 1"F. BDG257 - Elbow Tap connector PEX x Swivel Female (press x captive nut female): BDG2570103: 16 x 3/8"F, BDG2570104: 16 x 1/2"F, BDG2570106: 16 x 3/4"F, BDG2570304: 20 x 1/2"F, BDG2570306: 20 x 3/4"F, BDG2570401: 25 x 3/4"F, BDG2570402: 25 x 1"F, BDG2570506: 26 x 3/4"F, BDG2570508: 26 x 1"F, BDG2570608: 32 x 1"F. BDG255 - Equal Tee (press): BDG2550101: 16mm, BDG2550301: 20mm, BDG2550401: 25mm, BDG2550501: 26mm, BDG2550601: 32mm. BDG254 - Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): BDG2540101: 16 x 20 x 16, BDG2541001: 20 x 16 x 16, BDG2541101: 20 x 16 x 20, BDG2541201: 20 x 20 x 16, BDG2541202: 20 x 26 x 16, BDG2541402: 20 x 26 x 20, BDG2541403: 20 x 32 x 32, BDG2541501: 25 x 16 x 16, BDG2541601: 25 x 16 x 20, BDG2541701: 25 x 16 x 25, BDG2541801: 25 x 20 x 16, BDG2541901: 25 x 20 x 20, BDG2542001: 25 x 20 x 25, BDG2542101: 25 x 25 x 20, BDG2541300: 26 x 16 x 16, BDG2542300: 26 x 16 x 20, BDG2542500: 26 x 20 x 16, BDG2542301: 26 x 16 x 26, BDG2542401: 26 x 20 x 20, BDG2542501: 26 x 20 x 26, BDG2542502: 26 x 26 x 16, BDG2542503: 26 x 26 x 20, BDG2542800: 32 x 20 x 26, BDG2542602: 32 x 32 x 26, BDG2542504: 26 x 32 x 26, BDG2542802: 32 x 32 x 20, BDG2542803: 32 x 16 x 32, BDG2542801: 32 x 20 x 32, BDG2542601: 32 x 26 x 26, BDG2542701: 32 x 26 x 32. BDG250 - Reduce Tee PEX(Left) x PEX(Right) x Male(Middle) (press x male x press): BDG2500101: 16 x 1/2"M x 16, BDG2500301: 20 x 1/2"M x 20, BDG2500302: 20 x 3/4"M x 20, BDG2500401: 25 x 3/4"M x 25, BDG2500402: 25 x 1"M x 25, BDG2500500: 26 x 1/2"M x 26, BDG2500501: 26 x 3/4"M x 26, BDG2500502: 26 x 1"M x 26, BDG2500600: 32 x 1/2"M x 32, BDG2500601: 32 x 3/4"M x 32, BDG2500701: 32 x 1"M x 32. BDG251 - Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): BDG2510101: 16 x 1/2"F x 16, BDG2510301: 20 x 1/2"F x 20, BDG2510302: 20 x 3/4"F x 20, BDG2510303: 26 x 1/2"F x 26, BDG2510304: 26 x 3/4"F x 20, BDG2510306: 26 x 3/4"F x 26, BDG2510308: 26 x 1"F x 26, BDG2510401: 25x3/4"F x 25, BDG2510402: 25x1"F x 25, BDG2510500: 32 x 1/2"F x 32, BDG2510501: 32 x 3/4"F x 32, BDG2510502: 32 x 1"F x 32.

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC FLUID CONTROL CO., LTD.

Company Name

IDC FLUID CONTROL CO., LTD.

Address

Mechanical & Electrical Industrial Zone Yuhuan City Zhejiang Province

Country

China

General Email

View All Listings by this Company

MecFlow Press (PPSU & Brass) Ranges of press fittings for use with MecFlow Press pipes. Maximum working pressure 10.0 bar. The maximum operating temperature is 95oC.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2307914

Size:

16mm-63mm.

Marking:

Pipe – MecFlow Press, Size, PE-Xb/Al/PE-RT, date of production, made in Germany, operation parameters. Fittings – ‘F’, size, PPSU, production date.

Installation Requirements:

R001 R008

Expiry date:

31/07/2028

Model:

8017.16X05B 8017.16X05W 8017.16X075W 8017.20X05.90BW 8017.20X05W 8017.20X075.90BW 8017.20X075B 8017.20X075W 8017.20X1B 8017.26X075.90BW 8017.26X075B 8017.26X1B 8017.32X1.90BW 8017.32X125B 8017.32X1B 8024.20X16W 8024.26X16W 8024.26X20W 8024.32X20W 8024.32X26W 8027.16X15B 8027.20X22B 8004.26X16X26.90W 8004.26X20X16.90W 8004.26X20X20.90W 8004.26X20X26.90W 8004.26X26X16.90W 8004.26X26X20.90W 8004.32.90W 8004.32X16X32.90W 8004.32X20X26.90W 8004.32X20X32.90W 8004.32X26X26.90W 8004.32X26X32.90W 8004R.16.90W 8010.16W 8027.26X22B 8027.32X28B 8030.16W 8030.20W 8030.26W 8030.32W 8046.16X05X16.90BW 8046.20X05X20.90BW 8046.20X075X20.90BW 8046.26X05X26.90BW 8046.26X075X26.90BW 8046.32X05X32.90BW 8046.32X075X32.90BW 8046.32X1X32.90BW 8058.16X05.90BW 8058.16X05BW 8058.16X075.90BW 8058.16X075BW 8058.20X075.90BW 8058.20X075BW 8058.20X1BW 8000.16.50W 8000.20.50W 8000.26.50W 8000.32.50W 8000C.16.1000W 8000C.20.1000W 8000C.26.500W 8000C.32.500W 8058.26X075BW 8058.26X1.90BW 8058.26X125BW 8058.26X15BW 8058.26X1BW 8058.32X125BW 8058.32X15BW 8058.32X1BW 8001.16.90W 8001.20.90W 8010.20W 8010.26W 8010.32W 8015.16X05.35.90BW 8015.20X05.35.90BW 8015.20X075.35.90BW 8015.26X075.35.90BW 8001.26.45W 8001.26.90W 8001.32.45W 8001.32.90W 8001R.16.90W 8004.16.90W 8004.16X20X16.90W 8004.20.90W 8004.20X16X16.90W 8004.20X16X20.90W 8004.20X20X16.90W 8004.20X26X20.90W 8004.26.90W 8004.26X16X20.90W 8016.16X05.90BW 8016.16X05B 8016.20X05.90BW 8016.20X05B 8016.20X075.90BW 8016.20X075B 8016.26X075.90BW 8016.26X075B 8016.26X1B 8016.32X1.90BW 8016.32X125B 8016.32X1B 8017.16X05.90BW alpex duo XS - Multilayer metal PE-Xb/Al/PE-RT pipe (DN16, 20, 26, 32), alpex L - Multilayer metal PE-Xb/Al/PE-RT pipe (DN40, 50,63), alpex duo XS - Press fittings made of brass and PPSU (DN16, 20, 26, 32), alpex L - Press fittings made of brass and PPSU (DN40, 50, 63).

Approval Holder:

Polypipe Building Services

Company Name

Polypipe Building Services

Address

New Hythe Business Park, College Road, Aylesford, Kent

Postcode

ME20 7PJ

View All Listings by this Company

Manufacturer:

Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Company Name

Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Address

Hellinger Strasse 1, D-97438 Konigsberg, Germany

View All Listings by this Company

Manufacturer:

Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Company Name

Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Address

Hellinger Strasse 1, D-97438 Konigsberg, Germany

View All Listings by this Company

Universal plastic compression adaptor kits for use with SAB A16 fitting body (not included as part of this approval) and galvanised steel pipe (manufactured to EN 10255). Maximum working pressure 16 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240504707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

When used with galvanised pipe and for wholesome water consult your local water company.

Size:

½” BSP M.

Marking:

SAB, SAB logo, nominal size range moulded on nut

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

S16 UF Kit Universal conversion Kit Ø15-21, model U139000015.

Approval Holder:

Sab SpA

Company Name

Sab SpA

Address

Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)

Country

Italy

View All Listings by this Company

Manufacturer:

Sab SpA

Company Name

Sab SpA

Address

Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)

Country

Italy

View All Listings by this Company

Range of M profile brass press fittings with EPDM ‘O’-rings or gaskets to be used with copper pipe manufactured to EN1057 for above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240604008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Hailiang & size on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

EKYA00103 MALE CONNECTOR CXM - 15mmxR 1/2 EKYA00157 MALE CONNECTOR CXM - 15mmxR 3/4 EKYA00115 MALE CONNECTOR CXM - 22mmxR 1/2 EKYA00104 MALE CONNECTOR CXM - 22mmxR 3/4 EKYA00116 MALE CONNECTOR CXM - 22mmxR 1 EKYA00117 MALE CONNECTOR CXM - 28mmxR 3/4 EKYA00105 MALE CONNECTOR CXM - 28mmxR 1 EKYA00118 MALE CONNECTOR CXM - 35mmxR 1 EKYA00106 MALE CONNECTOR CXM - 35mmxR 1 1/4 EKYA00107 MALE CONNECTOR CXM - 42mmxR 1 1/2 EKYA00108 MALE CONNECTOR CXM - 54mmxR 2 EKYA00109 MALE CONNECTOR CXM - 66.7mmxR 2 1/2 EKYA00110 MALE CONNECTOR CXM - 76.1mmxR 2 1/2 EKYA00111 MALE CONNECTOR CXM - 76.1mmxR 3 EKYA00303 FEMALE CONNECTOR CXF - 15mmxRp 1/2 EKYA00357 FEMALE CONNECTOR CXF - 15mmxRp 3/4 EKYA00315 FEMALE CONNECTOR CXF - 22mmxRp 1/2 EKYA00304 FEMALE CONNECTOR CXF - 22mmxRp 3/4 EKYA00316 FEMALE CONNECTOR CXF - 22mmxRp 1 EKYA00317 FEMALE CONNECTOR CXF - 28mmxRp 3/4 EKYA00305 FEMALE CONNECTOR CXF - 28mmxRp 1 EKYA00318 FEMALE CONNECTOR CXF - 35mmxRp 1 EKYA00306 FEMALE CONNECTOR CXF - 35mmxRp 1 1/4 EKYA00307 FEMALE CONNECTOR CXF - 42mmxRp 1 1/2 EKYA00308 FEMALE CONNECTOR CXF - 54mmxRp 2 EKYA00309 FEMALE CONNECTOR CXF - 66.7mmxRp 2 1/2 EKYA00310 FEMALE CONNECTOR CXF - 76.1mmxRp 2 1/2 EKYA00311 FEMALE CONNECTOR CXF - 76.1mmxRp 3 EKYA10103 MALE ELBOW CXM - 15mmxR 1/2 EKYA10104 MALE ELBOW CXM - 22mmxR 3/4 EKYA10105 MALE ELBOW CXM - 28mmxR 1 EKYA10106 MALE ELBOW CXM - 35mmxR 1 1/4 EKYA10107 MALE ELBOW CXM - 42mmxR 1 1/2 EKYA10108 MALE ELBOW CXM - 54mmxR 2 EKYA10303 FEMALE ELBOW CXF - 15mmxRp 1/2 EKYA10304 FEMALE ELBOW CXF - 22mmxRp 3/4 EKYA10305 FEMALE ELBOW CXF - 28mmxRp 1 EKYA10306 FEMALE ELBOW CXF - 35mmxRp 1 1/4 EKYA10307 FEMALE ELBOW CXF - 42mmxRp 1 1/2 EKYA10308 FEMALE ELBOW CXF - 54mmxRp 2 EKYA10803 WALLPLATE ELBOW - 15mmxRp 1/2 EKYA10804 WALLPLATE ELBOW - 22mmxRp ¾ EKYA01003 UNION COUPLING CXC - 15mm EKYA01004 UNION COUPLING CXC - 22mm EKYA01005 UNION COUPLING CXC - 28mm EKYA01006 UNION COUPLING CXC - 35mm EKYA01007 UNION COUPLING CXC - 42mm EKYA01008 UNION COUPLING CXC - 54mm EKYA20303 FEMALE TEE CXCXF - 15mmx15mmxRp 1/2 EKYA20315 FEMALE TEE CXCXF - 22mmx22mmxRp 1/2 EKYA20304 FEMALE TEE CXCXF - 22mmx22mmxRp 3/4 EKYA20316 FEMALE TEE CXCXF - 28mmx28mmxRp 1/2 EKYA20317 FEMALE TEE CXCXF - 28mmx28mmxRp 3/4 EKYA20305 FEMALE TEE CXCXF - 28mmx28mmxRp 1 EKYA20318 FEMALE TEE CXCXF - 35mmx35mmxRp 1/2 EKYA20319 FEMALE TEE CXCXF - 35mmx35mmxRp 3/4 EKYA20320 FEMALE TEE CXCXF - 35mmx35mmxRp 1 EKYA20306 FEMALE TEE CXCXF - 35mmx35mmxRp 1 1/4 EKYA20321 FEMALE TEE CXCXF - 42mmx42mmxRp 1/2 EKYA20322 FEMALE TEE CXCXF - 42mmx42mmxRp 3/4 EKYA20323 FEMALE TEE CXCXF - 42mmx42mmxRp 1 EKYA20307 FEMALE TEE CXCXF - 42mmx42mmxRp 1 1/2 EKYA20324 FEMALE TEE CXCXF - 54mmx54mmxRp 1/2 EKYA20325 FEMALE TEE CXCXF - 54mmx54mmxRp 1 EKYA20308 FEMALE TEE CXCXF - 54mmx54mmxRp 2 EKYA01303 STRAIGHT SWIVEL CONNECTOR CXF - 15mmxG 1/2 EKYA01357 STRAIGHT SWIVEL CONNECTOR CXF - 15mmxG 3/4 EKYA01304 STRAIGHT SWIVEL CONNECTOR CXF - 22mmxG 3/4 EKYA01315 STRAIGHT SWIVEL CONNECTOR CXF - 22mmxG 1 EKYA01316 STRAIGHT SWIVEL CONNECTOR CXF - 28mmxG 1 1/4 EKYA01317 STRAIGHT SWIVEL CONNECTOR CXF - 35mmxG 1 1/2 EKYA01318 STRAIGHT SWIVEL CONNECTOR CXF - 42mmxG 2 EKYA01203 STRAIGHT MALE UNION CXM - 15mmxR 1/2 EKYA01257 STRAIGHT MALE UNION CXM - 15mmxR 3/4 EKYA01215 STRAIGHT MALE UNION CXM - 22mmxR 1/2 EKYA01204 STRAIGHT MALE UNION CXM - 22mmxR 3/4 EKYA01216 STRAIGHT MALE UNION CXM - 22mmxR 1 EKYA01217 STRAIGHT MALE UNION CXM - 28mmxR 3/4 EKYA01205 STRAIGHT MALE UNION CXM - 28mmxR 1 EKYA01206 STRAIGHT MALE UNION CXM - 35mmxR 1 1/4 EKYA01207 STRAIGHT MALE UNION CXM - 42mmxR 1 1/2 EKYA01208 STRAIGHT MALE UNION CXM - 54mmxR 2 EKYA01103 STRAIGHT FEMALE UNION CXF - 15mmxRp 1/2 EKYA01157 STRAIGHT FEMALE UNION CXF - 15mmxRp 3/4 EKYA01115 STRAIGHT FEMALE UNION CXF - 22mmxRp 1/2 EKYA01104 STRAIGHT FEMALE UNION CXF - 22mmxRp 3/4 EKYA01116 STRAIGHT FEMALE UNION CXF - 22mmxRp 1 EKYA01117 STRAIGHT FEMALE UNION CXF - 28mmxRp 3/4 EKYA01105 STRAIGHT FEMALE UNION CXF - 28mmxRp 1 EKYA01106 STRAIGHT FEMALE UNION CXF - 35mmxRp 1 1/4 EKYA01107 STRAIGHT FEMALE UNION CXF - 42mmxRp 1 1/2 EKYA01108 STRAIGHT FEMALE UNION CXF - 54mmxRp 2

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of ‘Isiflo Sprint’ push fit fittings for use with PE100 pipe (manufactured in accordance with EN 12201), for above and below ground use. Isiflo Sprint Family fittings can be installed with seal liners, support liners and without any liner. Maximum working pressure 16 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240604032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Isiflo, size, flow arrow and date of manufacture (clock wheel)

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

8210052 Repkit IS 20mm (repair kit) 8210053 Repkit IS 25mm (repair kit) 8210054 Repkit IS 32mm (repair kit) 8210055 Repkit IS 40mm (repair kit) 8210056 Repkit IS 50mm (repair kit) 8210057 Repkit IS 63mm (repair kit) 8211002 100 20x20 IS Straight coupl 8211003 100 25x25 IS Straight coupl 8211004 100 32x32 IS Straight coupl 8211005 100 40x40 IS Straight coupl 8211006 100 50x50 IS Straight coupl 8211007 100 63x63 IS Straight coupl 8211020 102 63x32 IS Straight coupl 8211021 102 25x20 IS Straight coupl 8211022 102 32x25 IS Straight coupl 8211023 102 40x32 IS Straight coupl 8211024 102 50x40 IS Straight coupl 8211025 102 63x50 IS Straight coupl 8211026 102 32x20 IS Straight coupl 8211028 102 50x32 IS Straight coupl 8211053 105 25x1" IS Male coupl 8211054 105 32x1 1/4" IS Male coupl 8211055 105 40x1 1/2" IS Male coupl 8211056 105 50x2" IS Male coupl 8211058 105 32x1 1/2" IS Male coupl 8211059 105 32x2" IS Male coupl 8211102 110 20x1/2" IS Male coupl 8211103 110 25x3/4" IS Male coupl 8211104 110 32x1" IS Male coupl 8211105 110 40x1 1/4" IS Male coupl 8211106 110 50x1 1/2" IS Male coupl 8211107 110 63x2" IS Male coupl 8211124 112 32x3/4" IS Male coupl 8211125 112 40x1" IS Male coupl 8211126 112 50x1 1/4" IS Male coupl 8211128 112 32x1/2" IS Male coupl 8211153 115 25x1"IS Female coupl 8211154 115 32x1 1/4"IS Female coupl 8211160 116 50x1"IS Female coupl 8211161 116 40x1"IS Female coupl 8211162 116 20x1/2"IS Female coupl 8211163 116 25x3/4"IS Female coupl 8211164 116 32x1"IS Female coupl 8211165 116 40x1 1/4"IS Female coupl 8211166 116 50x1 1/2"IS Female coupl 8211167 116 63x2"IS Female coupl 8211169 116 32x3/4"IS Female coupl 8211202 120 20x20 IS Elbow 90° 8211203 120 25x25 IS Elbow 90° 8211204 120 32x32 IS Elbow 90° 8211205 120 40x40 IS Elbow 90° 8211206 120 50x50 IS Elbow 90° 8211207 120 63x63 IS Elbow 90° 8211212 121 20x1/2"IS Elbow male cou 8211213 121 25x3/4"IS Elbow male cou 8211214 121 32x1" IS Elbow Male coup 8211215 121 40x1 1/4"IS Elbow male 8211216 121 50x1 1/2"IS Elbow male 8211217 121 63x2"IS Elbow male coup 8211218 121 40x1 1/2"IS Elbow male 8211219 121 32x2" IS Elbow Male coup 8211220 122 25x1"IS Elbow FM 90° 8211221 122 32x1"IS Elbow FM 90° 8211223 122 25x3/4"IS Elbow FM 90° 8211224 122 32x1"IS Elbow FM 90° 8211225 122 40x1 1/4"IS Elbow FM 90° 8211226 122 50x1 1/2"IS Elbow FM 90° 8211227 122 63x2"IS Elbow FM 90° 8211228 122 50x1 1/2"IS Elbow FM 90° 8211229 122 25x3/4"IS Elbow FM 90° 8211234 123 32x32 IS Elbow45° 8211235 123 40x40 IS Elbow45° 8211236 123 50x50 IS Elbow45° 8211237 123 63x63 IS Elbow45° 8211245 124 40x1"IS Elbow Male90° 8211246 124 50x1 1/4"IS Elbow M 90° 8211252 125 20x20x20 IS Tee 8211253 125 25x25x25 IS Tee 8211254 125 32x32x32 IS Tee 8211255 125 40x40x40 IS Tee 8211256 125 50x50x50 IS Tee 8211257 125 63x63x63 IS Tee 8211323 132 25x3/4"x25 IS Tee 8211324 132 32x1"x32 IS Tee 8211325 132 40x1 1/4"x40 IS Tee 8211326 132 50x1 1/2"x50 IS Tee 8211328 132 63x2"x63 IS Tee 8211652 165 20 IS EndCap 8211653 165 25IS EndCap 8211654 165 32IS EndCap 8211655 165 40IS EndCap 8211656 165 50IS EndCap 8211657 165 63IS EndCap 8211802 180 20x2,0Støttehylse SDR11 8211803 180/181 25x2,3 Støttehylse S11 8211804 180 32x3,0Støttehylse SDR11 8211805 180 40x3,7Støttehylse SDR11 8211806 180 50x4,6Støttehylse SDR11 8211807 180 63x5,8Støttehylse SDR11 8211823 182 Seal Liner 25x2,3 8211824 182 Seal Liner 32x3,0 8211825 182 Seal Liner 40x3,7 8211826 182 Seal Liner 50x4,6 8211827 182 Seal Liner 63x5,8 8212293 229 25x25PE DoubleSwivel elbow 8212294 229 32x32PE DoubleSwivel elbow 8212295 229 40x40PE DoubleSwivel elbow 8212296 229 50x50PE DoubleSwivel elbow 8212297 229 63x63PE DoubleSwivel elbow 8216105 110 40x1 1/4"IS m/støttehylse 8216106 110 50x1 1/2"IS m/støttehylse 8216107 110 63x2"IS m/støttehylse 8011729 Muffe 1"R x 3/4"R kompositt 8011739 Muffe 11/2"G x 1"G kompositt 8011749 Muffe 2"Gx 1 1/2"G kompositt 8011516 Muffe 3/4"G kompositt 8011519 Muffe 1"G kompositt 8011523 Muffe 1 1/4"G kompositt 8011526 Muffe 1 1/2"G kompositt 8011533 Muffe 2"G kompositt 8211305 130 40x32x40 Tee

Approval Holder:

Isiflo AS

Company Name

Isiflo AS

Address

Enggata 40 Postboks 143 2830 Raufoss Norway

View All Listings by this Company

Manufacturer:

Isiflo AS

Company Name

Isiflo AS

Address

Enggata 40 Postboks 143 2830 Raufoss Norway

View All Listings by this Company