Water Regulations Approval Scheme Ltd

Fittings for use with Tube and Pipe

Section Code 1180 : Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

Back To Directory Sections

WRAS Approval Number: #2205310

‘Instantor’ range of press-fit fittings incorporating DZR brass or Gunmetal bodies and EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum working temperature 95˚C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2205310
Size:: SEE MODEL
Marking:: Sanbra Fyffe logo (S), Size, and Jaw Profile (VI or M) on body. CR and DZR on brass bodies.
Installation Requirements:: R001
Expiry date:: 31/05/2027
Model:: INSTANTOR Copper Press Straight coupler models CP311001 - ½” BSP (M) CP311002 - ¾” BSP (M) CP311003 - 1” BSP (M) CP312001 - ½” BSP (F) CP312002 - ¾” BSP (F) CP312003 - 1” BSP (F) CP411001 - ½” BSP (M) x 15mm Press CP411002 - ¾” BSP (M) x 22mm Press CP411003 - 1” BSP (M) x 28mm Press CP412001 - ½” BSP (F). x 15mm Press CP412002 - ¾” BSP (F). x 22mm Press CP412003 - 1” BSP (F) x 28mm Press

Product Images

Approval Holder:: Sanbra Fyffe Ltd.

Company Name
Sanbra Fyffe Ltd.
Address
Conex Works, Santry Avenue, Dublin
Postcode
D09 K160
Country
Ireland
Phone
353 1 842 6255
General Email
sales@sanbra.ie

View All Listings by this Company

WRAS Approval Number: #2206013

Range of ‘StrengThin™’ 100 System couplings and fittings for use with stainless steel pipe (manufactured to EN 10217-7). For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2206013
Size:: Please refer to model.
Marking:: Victaulic logo, model, size and technical information on body.
Installation Requirements:: R001
Expiry date:: 30/06/2027
Model:: StrengThin™ 100 System Couplings and Fittings comprising of models: No. E490, 90° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E491, 45° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E492, Tee: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E493, Reducing Tee: DN65 x DN65 x DN50; DN80 x DN80 x DN50, DN80 x DN80 x DN65, DN100 x DN100 x DN50 DN100 x DN100 x DN65, DN100 x DN100 x DN80, DN125 x DN125 x DN65, DN125 x DN125 x DN80, DN125 x DN125 x DN100, DN150 x DN150 x DN80, DN150 x DN150 x DN100, DN150 x DN150 x DN125, DN200 x DN200 x DN100, DN200 x DN200 x DN125, DN200 x DN200 x DN150; DN250 x DN250 x DN1250, DN250 x DN250 x DN150, DN250 x DN250 x DN200; DN300 x DN300 x DN150, DN250 x DN250 x DN200 & DN250 x DN250 x DN250. No. E494, & E494G Adaptor Nipple: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E495, Concentric Reducer: DN65xDN50, DN80xDN50, DN80xDN65, DN100xDN50, DN100xDN65, CN100xDN80, DN125xDN80, DN125xDN100, DN150xDN100, D150xDN125, DN200xDN125, DN200xDN150, DN250xDN150, DN250xDN200, DN300xDN200 & DN300xDN250. No. E496, End Cap: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Style E497, Rigid Coupling: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E498, Flange Adaptor: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Models added April 2024: Style E155 ‘StrengThin™’ 100 system Expansion Joint: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300

Product Images

Approval Holder:: Victaulic Europe BVBA

Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company
Manufacturer:: Victaulic Europe BVBA

Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company

WRAS Approval Number: #2206027

Kuterlite K900 Pro range of compression fittings with DZR brass bodies for use with copper pipe (EN 1254) Maximum working pressure for 8mm-10mm = 70.0 bar. Maximum working pressure for 12mm – 28mm = 20.0 bar. Maximum working pressure for 35mm – 54mm = 6.0 bar. Maximum operating temperature 90°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2206027
Size:: Please refer to model.
Marking:: Kuterlite PRO, Flow arrow, EN 1254-2 and size on nut. CR on body.
Installation Requirements:: R001
Expiry date:: 30/06/2027
Model:: K910X: Straight Coupling 10mm to 54mm K911X: (M) Coupling 12mm to 54mm x ¼” BSP (M) to 2” BSP (M) K911PX: (M) Coupling 8mm to 54mm x ½” BSP (F) to 2” BSP (F) K911LBX: Long Tank Coupling 22mm x ¾” BSP (M) & 28mm x 1” BSP (M) K911TCX: Tank Coupling 15mm to 54mm x ½” BSP (M) to 2” BSP (M) K912X: (F) Coupling 12mm to 54mm x 3/8” BSP (F) to 2” BSP (F) K915X: Elbow 12mm to 54mm K916X: (M) Elbow 12mm to 54mm x 3/8” BSP (M) to 2” BSP (M) K916PX: (M) Elbow 15 to 28mm x ½” BSP (M) to 1” BSP (M) K916LBX: Long (M) Elbow 22mm x ¾” BSP (M) K917X: (F) Elbow 12mm to 42mm x 3/8” BSP (F) to 1.1/2” BSP (F) K917WX: (F) Wall Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918X: Equal Tee 10mm to 54mm K918BX: Tee (Reduced) 15mm to 54mm K918EBX: Tee End & Branch 15mm to 28mm K918EEX: Tee (Both Reduced) 12mm to 22mm K920X: (M) End Tee 15mm x ½” BSP (M) x 15mm K920HX: (M) Branch Tee 15mm x 15mm x ½” BSP (M) K923X: Cross 15mm KS926X: Swivel Tap Connector 15mm x ½” BSP (M) to ¾” BSP (M) & 22mm x ¾” BSP (M) K927X: Bent Tap Connector 15mm x ½” BSP (M) & 22mm x ¾” BSP (M) K930X: (F) Branch Tee 15mm to 28mm x 15mm to 28mm x ¼” BSP (F) to 1” BSP (F) K930EX: (F) End Tee 15mm to 28mm x ½” BSP (F) to ¾” BSP (F) x 15mm to 28mm K941X (F) Adaptor 22mm x ¾” BSP (F) K947X: Reducer 8mm to 28mm K948: Reducing Set 22mm to 28mm K949: Reducing Set 35mm to 54mm KS950X: Tank Connector 15mm to 54mm K951X: Stop End 12mm to54mm K953X: Crossover 15mm K972X: Blanking Plug 15mm to 54mm K1870X: Kufit Adaptor 15mm to 22mm K915XCP: Elbow 15mm & 35mm K917WXCP: Backplate Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918XCP: Equal Tee 15mm K918BXCP: Tee (Reduced) 15mm to 28mm K947XCP: One Piece Reducer 15mm to 22mm

Product Images

Approval Holder:: Aalberts Integrated Piping Systems Ltd.

Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

WRAS Approval Number: #2206045

Range of copper and DZR brass press fit tap connectors for use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2206045
Size:: ½” press fit x ½” BSP captive nut. ¾” press fit x ¾” BSP captive nut.
Marking:: >B< (manufacturer’s logo), DR & size on body
Installation Requirements:: R001
Expiry date:: 30/06/2027
Model:: PIR5002G – Bent Tap Connector PIR5002G040400 & PIR5002G060600. PIR5240G – Straight Tap Connector PIR5240G040400 & PIR5240G060600.

Product Images

Approval Holder:: Conex Universal Limited

Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company
Manufacturer:: Conex Universal Limited

Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

WRAS Approval Number: #2206015

Range of ductile iron pipe couplings for use with stainless steel and carbon steel pipe. The carbon steel pipe must incorporate a suitable coating or lining for wholesome water use. For maximum working pressure and the type of pipe the fittings are for use with, please refer to model. For above and below ground use. Maximum operating temperature 65°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2206015
Size:: Please refer to model.
Marking:: Victaulic size, model and product info on clamp
Installation Requirements:: R001
Expiry date:: 30/06/2027
Model:: Style W07, AGS Rigid Coupling for use with Sch10 Carbon Steel pipe: DN350, DN400, DN450, DN500, DN550 - maximum working pressure 25.0 bar. DN600 - maximum working pressure 16.0 bar. Style W77, AGS Flexible Coupling for with Sch10 Carbon Steel pipe: DN350, DN400, DN450, DN500, DN550 - maximum working pressure 25.0 bar. DN600 - maximum working pressure 16.0 bar. Style W89, AGS Rigid Coupling for use with 9.5mm carbon steel pipe: DN350, DN400, DN450, DN500, DN550, DN600 - maximum working pressure 20.68 bar. Style W89, AGS Rigid Coupling for use with Sch10S stainless steel pipe: DN350, DN400, DN450, DN500, DN550, DN600 - maximum working pressure 20.68 bar. Style W89, AGS Rigid Coupling for use with 3mm stainless steel pipe: DN350 - maximum working pressure 16.0 bar. Style W89, AGS Rigid Coupling for use with 4mm stainless steel pipe: DN350 - maximum working pressure 20.68 bar.

Product Images

Approval Holder:: Victaulic Europe BVBA

Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company