Directory Search Results

Print List

#2111312

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (brass body - various finishes, see model). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The inlet hose incorporates an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2111312
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ⅜” captive nut end connection.
Marking:
KEUCO on body
Installation Requirements:
R001 R006 R009
Expiry date:
30/11/2026
Model:
51613xx01zz - Elegance Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. zz = power supply: 00 - with battery 6V supply. 01 - with mains supply 230V (230V/6V).

Approval Holder:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2111313

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (brass body - various finishes, see model). Flow is controlled by a solenoid valve activated via an infra-red sensor. The product incorporates a manual temperature control operated by a single lever on the side of the body. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2111313
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
KEUCO on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2026
Model:
51611xxyyzz - Elegenace Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. yy = pop-up waste: 00 - supplied with pop-up waste. 01 - without pop-up waste. zz = power supply: 00 - with battery 6V supply. 01 - with mains supply 230V (230V/6V).

Approval Holder:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#2109024

BS1212-4 (2016) compact type float operated valve for WC flushing cisterns, side entry type. The inlet incorporates a plastic flow restrictor. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2109024
Size:
½” BSP (M) 3/8” BSP (M)
Marking:
RONGJI (brand of manufacturer), BS1212-4, datum level & model on body
Installation Requirements:
R001 R550
Expiry date:
30/09/2026
Model:
A1200

Approval Holder:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company
Manufacturer:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company

Print This Approval


#2110047

Range of BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, bottom or side entry type. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2110047
Size:
1/2” BSP (M)
Marking:
Company LOGO “NUCA”, “BS1212-4” and model number on body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/10/2026
Model:
A211 (Side entry) A301-260 (Bottom entry) A301-300 (Bottom entry)

Approval Holder:
Compas (Xiamen) Plumbing Technology Co Ltd
Company Name
Compas (Xiamen) Plumbing Technology Co Ltd
Address
No. 798 South Yuanshan Road, Xiamen, Fujian
Country
China,

View All Listings by this Company
Manufacturer:
Compas (Xiamen) Plumbing Technology Co Ltd
Company Name
Compas (Xiamen) Plumbing Technology Co Ltd
Address
No. 798 South Yuanshan Road, Xiamen, Fujian
Country
China,

View All Listings by this Company

Print This Approval


#2109022

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109022
Size:
15mm Compression Model added April 2022: ½” BSP (M)
Marking:
Fluidmaster, model and flushing volumes inside of cistern. Olympia on operating buttons. Model added April 2022: Fluidmaster, model and flushing volumes inside of cistern.
Installation Requirements:
R001 R556
Expiry date:
30/09/2026
Model:
T02-0100WRAS1, T02-0100WRAS2 & T02-0100WRAS3. Model added April 2022: T02-0800WRAS3

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company

Print This Approval


#2110097

WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2110097
Size:
½” BSP (M)
Marking:
Fluidmaster on cistern. Schwab brandname on operating button.
Installation Requirements:
R001 R556
Expiry date:
31/10/2026
Model:
5-474-025 UP FRONT-TOP 187 - 747 (cistern only). 5-398-070 DUPLO WC 187 83 cm 747 FV (cistern with frame).

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company

Print This Approval


#2106003

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106003
Size:
1/2” BSP (M).
Marking:
Fluidmaster and model number inside cistern.
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
T06-0800WRAS2 3-4.5 Ltr. T06-0800WRAS1 3-4.5 Ltr. T06-0100WRAS1 3-6Ltr. T06-0100WRAS2 3-6Ltr.

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company

Print This Approval


#2111035

Range of concealed WC flushing cisterns with a side entry BS 1212-4(2016) float operated inlet valve providing a type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two button assembly for a 6 or 3 litre flush volume. The cistern incorporates a servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. Maximum working pressure 10.0 Bar, Cold Water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111035
Size:
1/2" BSP (M)
Marking:
Rongji (brand of manufacturer), model number inside cistern.
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
ET336-F ET336

Approval Holder:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company
Manufacturer:
Xiamen R&J Precision Technology Co., Ltd.
Company Name
Xiamen R&J Precision Technology Co., Ltd.
Address

View All Listings by this Company

Print This Approval


#2111323

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111323
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: OLI, OLI PLUS MEC, product date DD/MM/YY 6L waterline within cistern
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
OLI120 PLUS MEC OLI120 PLUS PNEU

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2111356

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111356
Size:
½ “BSP (F) captive nut
Marking:
Vitra etched on flush plate, 6L waterline mark within cistern Vitra on Styropor cover External body states: Vitra, date of manufacture (DD/MM/YY), EN14055, 6L water level
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
742-5805-01. 742-4805-01. 742-1735-01 (model no longer available for purchase from February 2023).

Approval Holder:
ECZACIBAŞI YAPI GEREÇLERİ SANAYİ VE TİCARET A.Ş
Company Name
ECZACIBAŞI YAPI GEREÇLERİ SANAYİ VE TİCARET A.Ş
Address
4 Eylül Mahallesi Necmi Soylu Caddesi No:5 Bilecik
Postcode
11300
Country
Turkey
General Email
meltem.topcu@vitra.com.tr

View All Listings by this Company
Manufacturer:
ECZACIBAŞI YAPI GEREÇLERİ SANAYİ VE TİCARET A.Ş
Company Name
ECZACIBAŞI YAPI GEREÇLERİ SANAYİ VE TİCARET A.Ş
Address
4 Eylül Mahallesi Necmi Soylu Caddesi No:5 Bilecik
Postcode
11300
Country
Turkey
General Email
meltem.topcu@vitra.com.tr

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 50 of 652

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.