Range of indirect water heaters with an enamel lining, a magnesium sacrificial anode and single wall spiral heat exchanger (maximum working pressure 6.0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 7.0 bar. Maximum operating temperature 80°C

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504724

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

Lochinvar on adhesive label on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

SIVS 330 G E SIVS 440 G E SIVS 550 G E SIVS 660 G E LST 330 G E LST 440 G E LST 550 G E LST 660 G E

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of direct gas fired condensing storage water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Lochinvar on control board.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

ECH 32-220 CE ECH 33-370 CE ECH 52-370 CE ECH 63-370 CE ECH 87-480 CE ECH 106-480 CE ECH 129-480 CE HWH 32-220 CE HWH 33-370 CE HWH 52-370 CE HWH 63-370 CE HWH 87-480 CE HWH 106-480 CE HWH 129-480 CE WATER HEATERS

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of solar assisted direct gas fired condensing storage water heaters with an enamel lining and a titanium anode incorporating a solar heat exchanger (max. working pressure 6,0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP(M) inlet.

Marking:

Lochinvar on control board.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

HWHC 44-370 CE HWHC 63-370 CE

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of in-line ultrasonic water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50-200 flanged.

Marking:

Baylan on dial cover. Baylan, flow arrow and size on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

UW-6: DN50 (port length 200mm), UW-0: DN65 (port length 200mm), UW-1: DN80 (port length 225mm), UW-2: DN100 (port length 250mm), UW-3: DN125 (port length 250mm), UW-4: DN150 (port length 300mm), UW-5: DN200 (port length 350mm).

Approval Holder:

BAYLAN OLCU ALETLERI SAN. TICARET

Company Name

BAYLAN OLCU ALETLERI SAN. TICARET

Address

ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company

Manufacturer:

BAYLAN OLCU ALETLERI SAN. TICARET

Company Name

BAYLAN OLCU ALETLERI SAN. TICARET

Address

ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company

Range of ultrasonic water meters with brass bodies and plastic impellers. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾" BSP (M) (DN15), 1" BSP (M) (DN20), 1¼" BSP (M) (DN25), 1½" BSP (M) (DN32), 2" BSP (M) (DN40).

Marking:

NWM, Ningbo Water Meter Co., Ltd logo and technical information on meter face. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

UL-DW range.

Approval Holder:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company

Range of water meters (blue epoxy coated, cast iron bodies). Maximum working pressure 20 Bar. Maximum operating temperature 30°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

WE050HK200 - DN50 WE065IK200 - DN65 WE080JK200 - DN80 WE100KK250 - DN100/125 WE150MK300 - DN150 WE200MG350 – DN200 WE250OG450 – DN250

Marking:

Itron, serial number, product info on meter face. Size, flow arrow on body

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

WE050HK200 WE065IK200 WE080JK200 WE100KK250 WE150MK300 WE200MG350 WEG250

Approval Holder:

Itron Metering Solutions UK Ltd

Company Name

Itron Metering Solutions UK Ltd

Address

Unit 10, Haven Exchange Felixstowe Suffolk

Postcode

IP11 2QX

Phone

+44 161 865 1181

View All Listings by this Company

Range of horizontal or vertical multi-stage pumps with a stainless-steel body (HM models) or cast iron body with blue coloured cationic resin coating (VM models), incorporating either plastic or stainless-steel impellers (see model), stainless steel sleeve, EPDM gaskets and seals. Maximum working pressure 10.0 bar / 16.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240206701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HM models: 1” - 2” BSP (F) VM models: 1¼” - 1½” BSP (F).

Marking:

Lowara or Goulds Water Technology (both brands of Xylem), manufacturer and address, model number, serial number, maximum working pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

28/02/2029

Model:

1HM, 3HM, 5HM, 10HM, 15HM & 22HM. 1VM, 3VM, 5VM & 10VM. Model nomenclature: W XXX YY Z EM Where: W - flow rate (m3/h), either 1, 3, 5, 10, 15, or 22. XXX - Model type: Horizontal (HM) or Vertical (VM) mode, where last (optional) digit can denote the variable speed drive as follows: Null = standard asynchronous motor, H = equipped with Hydrovar, X = other drives, E = e-SM. YY - Number of impellers/stages HM models: 2-25 stages only (02-25), VM models: 2-8 stages only (02-08). Z - Material, where: (P) is plastic impeller and SS AISI 304 body (HM & VM models), (S) is SS AISI 304 impeller and body (HM models only), (N) is SS AISI 316 impeller and body (HM models only). E = 5 - 6 digits for electrical specification. M = 3 digits, where: 1st digit: Mech. rotary seal - V = Aluminium oxide (Ceramic), or Mech. rotary seal - Q = Silicon carbide (Ceramic). 2nd digit: Mech. stationary seal - B = Carbon resin impregnated. 3rd digit: Mech. seal elastomers - E = EPDM. Example code: 1HM03P05M5HVBE. Max Working Pressure for VM models → 10 bar. Max Working Pressure for HM models with stainless steel impellers and QBE Mechanical Seal → 16 bar (Depending on number of stages - see below), Max Working Pressure for HM models with plastic impellers and/or VBE Mechanical Seal → 10 bar (Depending on number of stages - see below). 1HM (P)/(S)/(N) 1-16 stages - 10.0 bar, 1HM (S)/(N) 18-25 stages - 16.0 bar. 3HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 3HM (S)/(N) 14-21 stages - 16.0 bar. 5HM (P)/(S)/(N) 1-13 stages - 10.0 bar, 5HM (S)/(N) 14-21 stages - 16.0 bar. 10HM (P)/(S)/(N) 1-8 stages - 10.0 bar, 10HM (S)/(N) 9-13 stages - 16.0 bar. 15HM (S)/(N) 2-7 stages - 10.0 bar, 22HM (S)/(N) 2-5 stages - 10.0 bar.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Manufacturer:

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Company Name

Lowara S.r.l | Xylem Service Italia S.r.l | Xylem Manufacturing Middle East Region FZCO Dubai | Xylem Water Systems International Philippines Inc.

Address

View All Listings by this Company

Range of submersible pumps with stainless steel bodies and impellers and NBR gaskets and ‘O’-rings. Cold water use only. .

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2303082

Note:

The level control assembly (cable and level control) are not covered under the scope of this approval. These pumps are also open outlet use only.

Size:

1 ¼” Female BSP outlet.

Marking:

Stuart Turner, model no., serial no., pressure and date of manufacture (DD/MM/YYY) on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2028

Model:

47064 47065 47066 47070 47071 47072

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of showers handsets with plastic bodies. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2304101

Size:

½” BSP (M).

Marking:

Villeroy & Boch on body.

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

TVS109006000XX

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Range of PVC lined flexible shower hoses (Various finishes see model). Open outlet use only. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2109385

Size:

½” BSP captive and conical nut

Marking:

Villeroy & Boch on conical nut.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

TVC00003* Chrome, Nickel, golden, rose golden, gun grey, black and white finishes

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company