Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2106047

Range OF JLA commercial washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with three ¾” x ¾” BSP (F) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet prior to a HDPE inlet hose with ¾” x ¾” captive nut end connections. Maximum working pressure 5.7 Bar. Maximum operating temperature 60°C.

Section:: 2370 Washing Machines
Section Subtitle:: Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 2106047
Note:: This appliance incorporates a Fluid Category 5 backflow prevention device. The double check valve assemblies supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. No detergents, softeners or other products are to be placed within the dispenser compartment that represent a risk greater than Fluid Category 3.
Size:: ¾” BSP (F) (to double check valve assembly)
Marking:: JLA logo, model, serial number, product info on label on back panel.
Installation Requirements:: R001 R160 R574
Expiry date:: 30/06/2026
Model:: JLA20 JLA30 JLA40 JLA60

Product Images

Approval Holder:: JLA Ltd

Company Name
JLA Ltd
Address
Meadowcroft Lane Ripponden West Yorkshire
Postcode
HX6 4AJ
Country
Ripponden

View All Listings by this Company

WRAS Approval Number: #2109354

Range of commercial front loading, hood type & utensil washer type dishwashing machines with flow controlled by solenoid and discharged via type AB air gap (verified by test - suitable for backflow protection against fluid category 5) . The products are supplied with a grey coloured PVC supply hose. Maximum working pressure 6.0 bar. Maximum operating temperature 90°C.

Section:: 2390 Washing Machines
Section Subtitle:: Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 2109354
Size:: ¾” BSP Captive nut.
Marking:: Hobart, manufacturers address, model no, serial no and other technical information on front casing.
Installation Requirements:: R001 R009 R520 R574
Expiry date:: 30/09/2026
Model:: Frond loading: Design State: FG-16-01 Device Code: G404W-12B, G404SW-12B, G504W-10B, G504SW-10B, F504W-20B, F504SW-20B Design State: GCB-13-04 Device Code: ECO+G415W-10C, ECO+G415SW-10C Design State: GC-18-01 Device Code: GCW-10B, GCSW-20B, GCROIW-10B, GCPW-10B, GCPROIW-10B, GPW-10B, GPSW-10B, GPCROIW-10B Design State: FXB-12-04 Device Code: ECO+G515W-10C, ECO+G515SW-10C, ECO+F515W-10C, ECO+F515SW-10C Design State: FX-18-01 Device Code: FXW-10B, FXSW-10B, FXLW-10B, FXLSW-10B, FXSTDW-10B, careSW-10B, FPW-10B, FPSW-10B, GXCW-11B, GXCSW-11B, GXCROIW-11B, GXW-11B, GXSW-11B Hood type: Design State: AM-14-02 Device Code: H604W-12B, H604SW-12B Design State: AMB-14-03 Device Code: ECO+H615W-10C, ECO+H615SW-10C Design State: AMX-14-02 Device Code: AM900W-10B, AM900SW-10B, , AMXW-10B, AMXSW-10B ,AMXRW-10B, AMXRSW-10B, AMXXW-10B, AMXXSW-10B, AMXXRW-10B, AMXXRSW-10B, AUPW-10B, AUPSW-10B, AUPRSW-10B, AMXTW-10B, AUPTW-10B, AMXXLW-10B, AMXXLSW-10B, AUPLW-10B, AUPLSW-10B, Design State: TLW-18-01: Device Code: TLWW-10A, TLWSW-10A Utensil washer: Design State: UX-15-01 Device Code: UX-10A, UXS-10A, UXC-10A, UXCS-10A, UXRC-10A, UXRCS-10A, UXT-10A, UXTC-10A, UXTRC-10A, UXTH-10A, UXTLH-10A, UXTHR-10A, UXTLHR-10A, UP-10A, UPC-10A, UPRC-10A, UPT-10A, UPTC-10A, UPTRC-10A Design State: U-15-01 Device Code: ECOMAX702-11A, ECOMAX702W-11A Models added June 2022: Frond loading Design State: FXB-12-04 Device Code: FXBSW-10C, FXBSW-15C, FXBW-10C, FXLBSW-10C, GXBSW-11C, GXCBSW-11C Hood type Design State: AMB-14-03 Device Code: AMXBSW-10C, AMXBW-10C, AMXXBRSW-10C Utensil washer Design State: UXB-15-01 Device Code: UXB-10C, UXBS-10C, UXTB-10C, UXTHB-10C, UXTLHB-10C Explanation: “Design State” defines the type of Machine and the Production-Generation “Device Code” defines the Order Code for a special equipped machine

Product Images

Approval Holder:: Hobart GmbH

Company Name
Hobart GmbH
Address
Robert-Bosch-Str. 17 77656 Offenburg
Country
Germany
Phone
+49 781 600-0
General Email
info@hobart.de

View All Listings by this Company
Manufacturer:: Hobart GmbH

Company Name
Hobart GmbH
Address
Robert-Bosch-Str. 17 77656 Offenburg
Country
Germany
Phone
+49 781 600-0
General Email
info@hobart.de

View All Listings by this Company

WRAS Approval Number: #2110014

`Hy-MAG` range of electromagnetic water conditioners with blue PTFE coated bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:: 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:: See model.
Marking:: HY-MAG on body. HY-MAG, temperature, pressure, model, serial number and other technical information on adhesive label on body.
Installation Requirements:: R001 R120 R150 R170
Expiry date:: 31/10/2026
Model:: HY-MAG DN15: ½” BSP (F). HY-MAG DN20: ¾” BSP (F). HY-MAG DN25: 1” BSP (F). HY-MAG DN32: 1 ¼” BSP (F). HY-MAG DN40: 1 ½” BSP (F). HY-MAG DN50: 2” BSP (F). HY-MAG DN65: 2 ½” BSP (F). HY-MAG DN100: 100mm flanged.

Product Images

Approval Holder:: Hydrotec International Water Treatment Limited

Company Name
Hydrotec International Water Treatment Limited
Address
38 Main Street Swords Country Dublin
Country
Ireland

View All Listings by this Company

WRAS Approval Number: #2110064

Range of electrolytic water conditioners, with a brass body and zinc alloy anodes. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:: See model.
Marking:: BRIGHTWATER, WRAS, model number, maximum pressure, maximum temperature, and flow arrow on adhesive label on body. Models added July 2022: BRIGHTWATER, serial no., maximum pressure, maximum temperature, WRAS, flow arrow and other information on adhesive label on body.
Installation Requirements:: R001 R120 R170
Expiry date:: 31/10/2026
Model:: ACP 15: ½” BSP (F) thread. ACP 20: ¾” BSP (F) thread. ACP 25: 1” BSP (F) thread. ACP 32: 1¼” BSP (F) thread. ACP 40: 1½” BSP (F) thread. ACP 50: 2” BSP (F) thread. ACP 65: PN16 2½” (65mm) Flat Face Flange. ACP 80: PN16 3” (80mm) Flat Face Flange. ACP 100: PN16 4” (100mm) Flat Face Flange. Models added July 2022: Advanced Crystallisation Process ACP125: 125mm Flat face Flange. Advanced Crystallisation Process ACP150: 150mm Flat face Flange.

Product Images

Approval Holder:: BrightWater Environmental Ltd

Company Name
BrightWater Environmental Ltd
Address
Redborough Barn, Stalisfield Green, Faversham
Postcode
ME13 0HX
Country
Kent.
General Email
sales@bwater.eu

View All Listings by this Company

WRAS Approval Number: #2110023

Range of domestic, salt regenerated ion exchange water softeners. Maximum working pressure 6.0 bar. Cold water use only.

Section:: 2450 Water softeners
Size:: ¾” BSP (M) inlet/outlet.
Marking:: Canature, model, product info on label on rear on body
Installation Requirements:: R001 R150 R170 R290 R415
Expiry date:: 31/10/2026
Proviso:: Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.
Model:: MN0613 & MN0622

Product Images

Approval Holder:: Canature Health Technology Group Co., Ltd.

Company Name
Canature Health Technology Group Co., Ltd.
Address
No.508&518, Chuanda Road, Pudong New Area, Shanghai
Country
China

View All Listings by this Company
Manufacturer:: Canature Health Technology Group Co., Ltd.

Company Name
Canature Health Technology Group Co., Ltd.
Address
No.508&518, Chuanda Road, Pudong New Area, Shanghai
Country
China

View All Listings by this Company