'ZGC110DQ & ZGC108DQ'. Beige coloured ion exchange resins. For use with water up to 65°C.
'WL1225 Lubricant Soft Soap'. Amber coloured (translucent) lubricant. Apply as per manufacturer's IFU dated 22nd April 2025. For use with water up to 65°C. This material incorporates a natural ingredient. Please note that water companies will evaluate the evidence provided and may ask for more information and they reserve the right to refuse installation.
'RP380s & RP361'. Off-white coloured (opaque) silicone greases. Apply as per manufacturer's instructions. For use with water up to 65°C.
'RADILON® DT RV300RKC2 205 WT'. White coloured, injection moulded, glass filled Polyamide 612 material. For use with water up to 85°C.
'Menzolit SMC1000 3018-White'. White coloured, hot-press compression moulded Polyester Sheet Moulding Compound (SMC). For use with water up to 30°C.
'POLYNT 1349 TAEQ20 to be used in conjunction with POLYCOR LP PA FC CLEAR 0200'. POLYNT 1349 TAEQ20 is a polyester resin and LP PA FC CLEAR 0200 is a factory applied, gel coat (when used together the material appears light pink in colour). Apply as per manufacturer's TDS ‘7206 Version: 0, 19/11/2020’. Cure for 24 hours@25°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'JXPE100LP'. Blue coloured, extruded HDPE pipe. For use with water up to 23°C.
'SAB A16 Compression Fittings'. Black coloured, compression fitting bodies, injection moulded from polypropylene (PP-B). For use with water up to 60°C.
'PTFE Thread Seal Tape 201 (white), 202 (pink), 203 (yellow), 204 (blue) & 205 (grey)'. PTFE tapes, manufactured by extrusion, stretching and calendaring, available in a range of colours. For use with water up to 85°C.
'DF1212'. White coloured, extruded PTFE tape. For use with water up to 85°C.
‘662016, 662014, 662062/SF (251VM), 662062-10PK/SF (523VM), 662061-10PK/SF (113VM)’. White coloured, PTFE tapes manufactured by calendering. For use with water up to 85°C.
‘AH Codes: 662016CB & 662014CB, CB Codes: 571983 & 571984’. White coloured, PTFE tape manufactured by calendering. For use with water up to 85°C.
'SPIT EPCON C8+ XTREM'. Site applied, brick coloured (once mixed), chemical anchor resin supplied in a pre-weighed dual cartridge. Apply as per manufacturer's instructions dated 'NOV. 25'. Cure for 24 hours@21°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'MBMS0715'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size between 0.35mm and 5.0mm. For use with water up to 85°C.
'XX-01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.05mm. For use with water up to 85°C.
'NK8650W-EPDM'. Black coloured, compression moulded EPDM material. Shore hardness 65. Tested in-radius size 1.1mm. For use with water up to 65°C.
'JSP/SF-02'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.05mm. For use with water up to 85°C.
'EW-001'. Black coloured, compression moulded EPDM material. Shore hardness 65. Tested in-radius size 1.0mm. For use with water up to 23°C.
'Griffon WDF-05®'. Site applied, blue coloured solvent cement. Apply as per manufacturer's instructions '6306959 20251027'. Cure for 30 minutes@12°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
Concealed WC dual flushing cistern with a side entry BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure – 10.0 bar, cold water use only.
Page 478 of 522
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
