Directory Search Results

Print List

#2106335

Dolphin Blue range of handheld shower outlets with a stainless bodies (various finishes) and EPDM ‘O’-rings. The inlet incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 85°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2106335
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Dolphin logo (D) on body.
Installation Requirements:
R001 R040
Expiry date:
30/06/2026
Model:
DB3020.x(.xx) The suffix x in the above codes – DB3020.x(.xx) - will be a number 1 - 5 to denote the finish: 1 to denote brushed/satin polished, 2 to denote mirror polished, 3 to denote brushed/satin polished with PVD coating, 4 to denote mirror polished with PVD coating 5 to denote powder coated. 6 - 9 to denote other material and finish options that may be available in the future. The suffix (xx), in above codes, which when in use appear without the brackets, are only applicable where the previous suffix 3 to 5 are used and they will consist of numbers 00-99 to denote the colour of PVD or powder coat. So for example DB3020.3.50 is brushed/satin polished with Gold PVD coating.
Product Images

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2012076

Range of flow switches with brass bodies incorporating EPDM ‘O’-rings, acting as a leak detection system that actuates an integral spherical valve to shut off the water supply. The inlet incorporates a stainless steel strainer. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

Section:
1719 Flow Activated Switches
WRAS Approval Number:
2012076
Note:
Cannot be used as the main stop valve into a premises. The fitting listed on this approval has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.
Size:
¾”, 1” & 1¼” BSP (M) inlet/outlet.
Marking:
‘SYR’ (Hans Sasserath GmbH & Co. KG logo) and SAFETECH on plastic cover.
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
SafeTech Connect 2422

Approval Holder:
Hans Sasserath GmbH
Company Name
Hans Sasserath GmbH
Address
Mühlenstrasse 62, D-41352 Korschenbroich
Country
Germany
Phone
+49 (0) 2161 - 6105 10
General Email
sasserath@syr.de

View All Listings by this Company
Manufacturer:
Hans Sasserath GmbH
Company Name
Hans Sasserath GmbH
Address
Mühlenstrasse 62, D-41352 Korschenbroich
Country
Germany
Phone
+49 (0) 2161 - 6105 10
General Email
sasserath@syr.de

View All Listings by this Company

Print This Approval


#2012087

Range of flow switches with brass bodies incorporating EPDM ‘O’-rings, acting as a leak detection system that actuates an integral spherical valve to shut off the water supply. The inlet incorporates a stainless steel strainer. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

Section:
1719 Flow Activated Switches
WRAS Approval Number:
2012087
Note:
Cannot be used as the main stop valve into a premises. The fitting listed on this approval has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.
Size:
¾”, 1” & 1¼” BSP (M) inlet/outlet.
Marking:
RELIANCE VALVES ON PLASTIC COVER
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
LEKP100001 - ¾, LEKP100002 1” & LEKP100003 1¼ FLOW ACTIVATED SWITCHES
Product Images

Manufacturer:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060

View All Listings by this Company

Print This Approval


#2102701

Drain cock elbow incorporating a DZR brass body with EPDM ’O’-rings (ZELB250445 model) or NBR ‘O’-rings (ZELB250446 model added July 2022). Both models are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures: ZELB250445 model - 10.0 Bar. ZELB250446 - 16.0 bar. Maximum operating temperature 85°C.

Section:
1770 Taps
Section Subtitle:
Draining, for above ground use only.
WRAS Approval Number:
2102701
Size:
See model.
Marking:
ZELB250445 model: RWC, CR and size on body. ZELB250446 model added July 2022: RWC, CR, size and BS2879 on body.
Installation Requirements:
R001 R511
Expiry date:
28/02/2026
Model:
ZELB250445: 22mm compression x ¾” BSP (M). Model added July 2022: ZELB250446 model: 28mm compression x 1” BSP (M).

Approval Holder:
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Company Name
RELIANCE WORLDWIDE CORPORATION (UK) LTD
Address
HORTON ROAD WEST DRAYTON
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2106020

Range of chromium plated stainless steel or brass interlocked shower hoses with an optional PVC outer layer. Incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
2106020
Note:
Open outlet use only.
Size:
½” BSP Captive nut inlet x outlet.
Marking:
WRAS, Solex and date of manufacture (MM/YY) on conical nut.
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
H25X0002S-03, H25X0002S-03 ANTITWIST, H25X0002S-05, H25X0002S-05 ANTITWIST, H25X0002S-05 ANTITWIST2, H25X0002S-06.
Product Images

Approval Holder:
Xiamen Solex High-Tech Industries Co., Ltd.
Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company
Manufacturer:
Xiamen Solex High-Tech Industries Co., Ltd.
Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 48 of 440

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.