Range of gate valves with blue epoxy coated ductile iron bodies and either an EPDM coated brass wedge (¾” - 1¼” of ASCENT01 models) or EPDM coated ductile iron wedge (all other models). The ASCENT01 models incorporate a square operating nut and the ASCENT02 models incorporate a hand wheel operating member. Maximum working pressures: ASCENT01 models: 16.0bar, ASCENT02 models: 10.0 or 16.0bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

260315011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

ASCENT01-gate valves: ¾” - 2” BSP (F) (DN20-50), ASCENT02-gate valves: DN50 - DN600 flanged.

Marking:

ASCENT01-gate valves: DN, PN and production date (YYMM or YYMMDD) on body. ASCENT on data plate on body. ASCENT02-gate valves: DN, PN, ASCENT on body. ASCENT on data plate on body.

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

ASCENT01-gate valves, ASCENT02-gate valves.

Approval Holder:

Shanxi Ascent Industrial Co., Ltd.

Company Name

Shanxi Ascent Industrial Co., Ltd.

Address

Floor 8, Tianjia Building, Xiaodian District, Taiyuan, Shanxi

Country

China

View All Listings by this Company

Manufacturer:

Shanxi Ascent Industrial Co., Ltd.

Company Name

Shanxi Ascent Industrial Co., Ltd.

Address

Room 801, 8th Floor, Tianjia Technology Building, No.20 Technology Road, Xiaodian District, Taiyuan City, Shanxi Province

Country

China

View All Listings by this Company

Range of screw down stop valves with brass or DZR brass bodies. Valves incorporate EPDM seat washers and PTFE seals. Maximum working pressure: 16 bar. Maximum operating temperature: 95°C

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

260302027

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Compression connections are for use with copper pipe manufacturer to BS EN 1057.

Size:

See model below

Marking:

Flow arrow, size and IDC logo (~E~)

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

Brass body compression stop valves: 1SVA006 15mm x 15mm 1SVA107 20mm x 20mm 1SVA008 22mm x 22mm 1SVA010 28mm x 28mm 1SVA167 15mm x 20mm 1SVA206 15mm x 15mm 1SVA210 28mm x 28mm 1SVA267 15mm x 20mm 1SVA269 15mm x 25mm 1SVA207 20mm x 20mm Female threaded stop valves: Brass: 1SVB004 1/2” BSP (F) 1SVB006 3/4” BSP (F) 1SVB008 1” BSP (F) DZR Brass: 1SVB204 1/2” BSP (F) 1SVB206 3/4” BSP (F) 1SVB208 1” BSP (F)

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of balancing valves with blue epoxy coated ductile iron bodies incorporating blue epoxy coated ductile iron (DN50~DN150) or stainless steel discs (DN200~DN300), EPDM gaskets and ‘O’-rings, handwheel operating member and a measuring port at each flanged end. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

260115002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50~DN300 flanged

Marking:

Brand logo (OTTO plus), model, WRAS, size, PN, material and production date (YYYY.MM) on data plate on body. ‘OTTO’ (brand of Barr Al Aman Int’l. Investment Co., Ltd.), PN, DN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

OW-DRV-16Q

Approval Holder:

Barr Al-Amman International

Company Name

Barr Al-Amman International

Address

Sanibil Centre Azizia District Baladia Street Jeddah

Country

Saudi Arabia

Phone

+966 056 652 5154

General Email

hafiz@barralaman.com.sa

View All Listings by this Company

Range of regulating valves with blue epoxy coated ductile iron bodies incorporating EPDM gaskets and hand wheel operating member. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

2201122

Size:

DN65 - DN300 flanged inlet and outlet connections

Marking:

Belven & logo, model code, PN, DN and other technical information on name plate on body. BV DN, PN, and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

BV 216 SERIES

Approval Holder:

Belven NV

Company Name

Belven NV

Address

Blokhuisstraat 24, Industriepark Noord 1, B-2800 Mechelen

Country

Belgium

Phone

+32 15294070

View All Listings by this Company

Range of UV disinfection units with stainless steel bodies and EPDM seals. The UV lamps are housed inside quartz tubes. Maximum working pressure 10.3 bar. Maximum operating temperature 40°C.

Section:

2411 Disinfection Equipment

Size:

Please refer to model.

Marking:

‘DEBE’ & logo, model and technical information on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

31/05/2027

Model:

DEBE5-023 (½” female NPT). DEBE5-033 & DEBE5-103(½” male NPT). DEBE5-063 (¾” male NPT). DEBE5-153 & DEBE5-203 (1” male NPT). DEBEH5-053 & DEBEH5-103 (¾” male NPT). DEBEH5-153 & DEBEH5-253 (1” male NPT) DEBEH50403 (1½” male NPT inlet and outlet). Controller options: 1. controller does not support UV sensor, ships with plug as standard. 2. can accept optional UV sensor, ships with plug as standard. 3. controller system ships with UV sensor as standard.

Approval Holder:

TerraRoc Ltd

Company Name

TerraRoc Ltd

Address

McCafferty Way McCafferty Way Industrial Estate Grangemouth

Postcode

FK3 8EB

Country

United Kingdom

General Email

infor@terraroc.com

View All Listings by this Company