Directory Search Results

Print List

#2208516

'Eurokote 468 Thixo Brun Rouge'. Factory applied, red/brown coloured, two-part epoxy coating consisting of a resin and hardener. Mix resin and hardener in a weight ratio of 77:23 and apply as per manufacturer's Data Sheet dated '10/05/2019'. Cure for 10 days@20°C. For use with water up to 60°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2208516
Expiry date:
31/08/2027

Approval Holder:
BS Coatings
Company Name
BS Coatings
Address
Allee Paul Sabatier, BP 88, 27940 Aubevoye
Country
France
Phone
+ 33 32773077

View All Listings by this Company

Print This Approval


#2207518

'ePIPE® UK'. Site applied, red-brown coloured, two-part epoxy based coating consisting of a based and activator. Mix base and activator in a 2:1 mass ratio and apply as per manufacturer's IFU issue '009', dated March 23, 2011. Air-cure for 60 minutes@25°C and then immerse in a water bath at 60°C for 60 minutes. For use with water up to 85°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5042 Coatings, Paints & Linings
Section Subtitle:
Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
2207518
Expiry date:
31/07/2027

Approval Holder:
Pipe Restoration Technologies, LLC
Company Name
Pipe Restoration Technologies, LLC
Address
7477 W. Lake Mead Drive, Suite #170 Las Vegas, Nevada, USA, 89128
Phone
800-359-6369

View All Listings by this Company

Print This Approval


#2208524

'Eurokote 480 FC'. Site applied, red coloured (once mixed), two part epoxy coating consisting of a resin and hardener. Mix, apply and cure (fully dry) in accordance with manufacturer's technical data sheet dated 23/09/2021. For use with water up to 23°C.

Section:
5042 Coatings, Paints & Linings
Section Subtitle:
Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
2208524
Expiry date:
31/08/2027

Approval Holder:
BS Coatings
Company Name
BS Coatings
Address
Allee Paul Sabatier, BP 88, 27940 Aubevoye
Country
France
Phone
+ 33 32773077

View All Listings by this Company

Print This Approval


#2208518

'YD-PEX' hose. Natural (white coloured), extruded single layered PEX hose. In May 2024 ‘YD-PEX-BL’ hose was added to the approval. Black coloured, extruded, single layered PEX hose. Both are for use with water up to 85°C.

Section:
5140 Hoses & Tubing
Expiry date:
31/08/2027

Approval Holder:
Wu Jiang Yuan Da Polymer Materials Trading CO., LTD.
Company Name
Wu Jiang Yuan Da Polymer Materials Trading CO., LTD.
Address
No. 341‐8 TunCun Village TunCun East Road, Tongli Town, Wujiang District of Suzhou City, Jiangsu Province
Country
China

View All Listings by this Company

Print This Approval


#2208522

'Sinopec Drinking Water Pipeline Sealing Lubricant (Product Code: 523478)'. White coloured lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C.

Section:
5160 Lubricants
Expiry date:
31/08/2027

Approval Holder:
Grease Branch, Sinopec Lubricant Co,. Ltd.
Company Name
Grease Branch, Sinopec Lubricant Co,. Ltd.

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 460 of 1575

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.