Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250755055

'HT5697-50'. Black coloured, injection moulded EPDM material. Shore hardness 67 ShA. Tested in-radius size 1.0mm. For use with water up to 60°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 250755055
Expiry date:: 31/07/2030

Approval Holder:: Hultec / Terramix S.A

Company Name
Hultec / Terramix S.A
Address
PO Box 84140-1000, San José
Country
Costa Rica

View All Listings by this Company

WRAS Approval Number: #250955014

'WE-HR-01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 75. Tested in-radius size 0.99mm. For use with water up to 85°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 250955014
Expiry date:: 30/09/2030

Approval Holder:: Tianjin Hongrui Rubber Co., Ltd.

Company Name
Tianjin Hongrui Rubber Co., Ltd.
Address
Beizhakou Electronical Industrial Area, Jinnan, Tianjin, 300350
Country
China
General Email
rubber@tj-hongrui.com

View All Listings by this Company

WRAS Approval Number: #250815310

Section:: 0684 Combination Tap Assemblies
Description:: A Tap(s) with a non-touch methods of flow control and a single inlet.
Wall mounted - Concealed. Product activated via an infra-red sensor. Stainless-steel braided & EPDM lined Inlet Hoses. Undefinable Air Gap – See IRN’s
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R008 R040
Expiry date:: 31/08/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
LT0188-B01	Black	1/2" BSP (F)	9 bar	65 °C	Mediclinics	Body	No	Solenoid	Not Applicable	Aerator

Product Images

Approval Holder:: Ningbo Syton Testing & Technology Service Co., Ltd.

Company Name
Ningbo Syton Testing & Technology Service Co., Ltd.
Address
F5 No. 5 Building Zhongchuanghui No. 128 Jingyuan Road Ningbo
Postcode
315040
Country
China
Phone
0086‐574‐87042953
General Email
justine.yu@syton.com.cn

View All Listings by this Company

WRAS Approval Number: #250704011

Range of spherical valves with DZR brass bodies, chromium plated brass balls, PTFE seats and EPDM rubber ‘O’-ring. The products also incorporate a ‘Y’- Patterned stainless steel strainer. Compression connection to be used with copper EN1057. AI-0396A062815CR incorporates an approved single check valve cartridge, verified by test - suitable for backflow protection against fluid category 2. Maximum working pressure: 25.0 bar. Maximum operating temperature: 100°C (model AI-0396A062815CR 65°).

Section:: 0554 Combination Tap Assemblies
Section Subtitle:: Two hole tap(s) with a single outlet and a swivel spout, incorporating a self-cancelling diverter to a shower outlet with a Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
WRAS Approval Number:: 250704011
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Airaga logo, flow arrow, CR, DN, PN25, date of cast (YYWW) casted on body.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: AI-397104RED - 3/4 F/F INTABALL COMBI - ¾” BSP(F), AI-397004 - 1/2 F/F INTABALL COMBI - ½” BSP(F), AI-397104 - 3/4 F/F INTABALL COMBI - ¾” BSP(F), AI-397204 - 1" INTABALL COMBI - 1” BSP(F), AI-397115 - 15MM INTABALL COMBI - 15mm compression, AI-397122 - 22MM INTABALL COMBI - 22mm compression, AI-395115 - 15MM INTABALL COMBI - 15mm compression, AI-0396A062815CR - 28MM X 1F SWIVEL INTABALL COMBI - 28mm x 1” BSP(M).

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #250815307

Section:: 1660 Shower Outlets
Description:: A Shower hose(s)
EPDM lining With Stainless steel.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 31/08/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
JD-PS*--****		F1/2, M15*1	Open outlet use only bar	85 °C	Kind, WRAS, Production date(MM.YYYY)	Ferrule	No

Notes & Further Information: Note: 1. 1st *** denotes the hose length: 15-300cm: E.g., 015 = 15cm, 100 = 100cm, 200 = 200cm. 2. 2nd ** denotes the hose size: 06=DN6, 07=DN7 3. 3rd **** denotes the connections, and can be replaced with any of the following: 01=F1/2 05=M15*1

Product Images

Approval Holder:: Guangzhou Kind Architecture Material Technology Co., Ltd.

Company Name
Guangzhou Kind Architecture Material Technology Co., Ltd.
Address
Unit 10 No 1 Dashadi West Huangpu District
Country
Guangzhou

View All Listings by this Company