Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #260302709

Range of cast iron (blue epoxy coated) (G versions only) or stainless steel (all other versions - F, N, R, T) vertical multistage pumps with stainless steel impellers, shaft and outer sleeve. Maximum working pressures: 16 bar, 25 bar and 40 bar. Oval flanges - Body type ‘T’ (1SV-3SV, 5SV, 10SV, 15SV-22SV) - 16 bar. Round flanges - Body type ‘R’ (1SV-3SV, 5SV, 10SV, 15SV-22SV) - 25 bar. Round flanges - Body type ‘F’ (1SV-3SV) - 25 bar. Round flanges - Body type ‘N’ (10SV) - 25 bar. Round flanges - Body type ‘N’ (66SV-92SV) - 16 bar. Round flanges - Body type ‘G’ (33SV, 46SV) - 40 bar. Round flanges - Body type ‘G’ (33SV, 46SV, 66SV-92SV, 125SV) - 16 bar. Round flanges - Body type ‘G’ (125SV) - 25 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 260302709
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Flanged inlet and outlet: (T versions have 2 bolt oval flanges). (F, G, N, R versions have round flanges). 1SV-3SV: DN25. 5SV: DN32. 10SV: DN40. 15-22SV: DN50. 33SV: DN65. 46SV: DN80. 66SV-92SV: DN100. 125SV: DN125.
Marking:: Lowara logo, Xylem, pressure and technical data on data plate on body. Lowara and WRAS on adhesive label on body DN80 46SV_10G_055 Lowara logo, Xylem, pressure and technical data on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/03/2031
Model:: 1SV, 3SV, 5SV, 10SV, 15SV, 22SV, 33SV, 46SV, 66SV, 92SV & 125SV series pumps. Example code: 10SV_05F_022_ _T/D Where: • 10 = flow rate in m³/h (1, 3, 5, 10, 15, 22, 33, 46, 66, 92, 125). • SV = series name. • _ = Motor operation. blank = standard version, H = equipped with Hydrovar, E = e-SM (1SV-22SV models only) or a single letter denoting the type of the variable speed drive model used. • 05 = 2 digits for number of impellers [05 = 5 impellers], can also be represented as: X/1A or X/2A, where X = number of impellers: 1-13, /1 or /2 = 1 or 2 impellers with outer diameter reduced. A = reduction type. • F = body type: F, T, R, G or N. 1SV-25SV models F - AISI 304, round flanges, T - AISI 304, oval flanges, R - AISI 304, discharge port above suction, round flanges, N - AISI 316, round flanges. 33-125SV models G - AISI 304/Cast Iron, round flanges. N - AISI 316, round flanges, • _ = blank (null) to denote standard version. • 022 = Rated motor power - 3 digits (kW x 10). • _ = blank (null) to denote 2-pole, 4 = 4 pole. • _ = blank (null) to denote 50Hz, 6 = 60Hz, 0 = e-SM (1SV-22SV models only). • T = Three-phase or M to denote single-phase or Null = standard version. • /D = relates to supply voltage and can also be blank, /2, /4 or /4/2.

Approval Holder:: Xylem Service Italia S.r.l

Company Name
Xylem Service Italia S.r.l
Address
Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza
Country
Italy
Phone
0039 0444 707111

View All Listings by this Company

WRAS Approval Number: #260304701

Range of electronic booster pumps with variable speed, incorporating stainless-steel bodies, impellers and shaft, EPDM gaskets and seals and an expansion vessel on the outlet. The pumps incorporate a drain port. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 260304701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain port must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: PBI-L2 prefix models: 1” BSP (F) x 1” BSP (F), PBI-L4 prefix models: 1¼” BSP (F) x 1” BSP (F), PBI-L8 prefix models: 1½” BSP (F) x 1¼” BSP (F).
Marking:: Wilo, model no., date of manufacture (YYWW) and other technical information on data label on body. Wilo on control box.
Installation Requirements:: R001 R415
Expiry date:: 31/03/2031
Model:: PBI-L series pumps: PBI-L203MA/P, PBI-L204MA/P, PBI-L205MA/P, PBI-L402MA/P, PBI-L403MA/P, PBI-L404MA/P, PBI-L405MA/P, PBI-L802MA/P, PBI-L803MA/P, PBI-L203EA/P, PBI-L204EA/P, PBI-L205EA/P, PBI-L402EA/P, PBI-L403EA/P, PBI-L404EA/P, PBI-L405EA/P, PBI-L802EA/P, PBI-L803EA/P, PBI-L203MA/P/S, PBI-L204MA/P/S, PBI-L205MA/P/S, PBI-L402MA/P/S, PBI-L403MA/P/S, PBI-L404MA/P/S, PBI-L405MA/P/S, PBI-L802MA/P/S, PBI-L803MA/P/S, PBI-L203EA/P/S, PBI-L204EA/P/S, PBI-L205EA/P/S, PBI-L402EA/P/S, PBI-L403EA/P/S, PBI-L404EA/P/S, PBI-L405EA/P/S, PBI-L802EA/P/S, PBI-L803EA/P/S. Where: PBI-L = series name (Electronic boosting pump variable speed pump (Inverter Pump)) 2, 4 or 8 = Rated flow capacity in m³/h. 2, 3, 4 or 5 = Number of Impellers. M or E = Power. M: 60Hz 220V/230V 1phase, E: 50Hz 220V/230V 1phase. [blank] or A = Mode. [blank]: Non-automatic models, A: Models with pressure sensor and inverter that are responsible for automatic mode, allowing the pump to operate at the corresponding RPM to maintain the set operating pressure. P = Product Category. P: Complete product. [blank] or S = Accessories. [blank]: No accessories, S: Sun cover.

Approval Holder:: WILO Pumps Ltd.

Company Name
WILO Pumps Ltd.
Address
46, Mieumsandan 1-ro, Gangseo-gu, Busan, Republic of Korea, 46730

View All Listings by this Company
Manufacturer:: WILO Pumps Ltd.

Company Name
WILO Pumps Ltd.
Address
46, Mieumsandan 1-ro, Gangseo-gu, Busan, Republic of Korea, 46730

View All Listings by this Company

WRAS Approval Number: #260307701

Range of circulating pumps, with plastic or stainless steel (cast EN 1.4308) bodies and a plastic impeller. Maximum working pressures: Stainless steel bodied pumps 10.0 bar, Plastic bodied pumps 3.0 bar. Maximum operating temperature 95°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 260307701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: R008 does not apply to the stainless-steel body models.
Size:: Composite (plastic body) (15 models): 1” BSP (M). Stainless steel body (25 models): 1½” BSP (M).
Marking:: Grundfos and Grundfos logo, type, model, production no. and other technical info on adhesive label on end of motor housing. Flow arrow on body.
Installation Requirements:: R001 R008
Expiry date:: 31/03/2031
Model:: Composite (plastic body): UPM2 15-** CIL2. Stainless steel body: UPM2 25-** N130, UPM2 25-** N180, UPML 25-** N180, UPMM 25-** N180, UPMXL 25-** N180. 130 or 180 (where applicable) = port to port length in mm. ** stands for the lifting height of the pump in dm, that can be various 2 or 3 digit numbers

Approval Holder:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

WRAS Approval Number: #260302015

Range of shower handsets and shower heads with (plastic bodies - various finishes) Some models incorporate a plastic flow restrictor, or a check valve with built in flow regulator (however, the complete product has not been fully tested to demonstrate it provides backflow protection) or neither (See models for FR or WSCV). Maximum operating temperature 60.0°C Open outlet use only

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 260302015
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2" BSP (M) – Shower handsets 13.90mm ID – Showerheads
Marking:: SOLEX on body
Installation Requirements:: R001
Expiry date:: 31/03/2031
Model:: Shower Handsets: P96400-1-XX (FR) P96400-2-XX (WSCV) P96400-1-white (FR, chrome finish, white faceplate) P96400-2-white (WSCV, chrome finish, white faceplate) Shower Heads: P100300-1-XX (FR) P100300-2-XX (No FR or WSCV) P100300-1-white (With FR, chrome finish, white faceplate) P103000-2-white (No FR or WSCV, chrome finish, white faceplate) P100400-1-XX (With FR) P100400-2-XX (No FR or WSCV) P100400-1-white (With FR, chrome finish, white faceplate) P100400-2-white (No FR or WSCV, chrome finish, white faceplate) Where XX denotes the finish (for both hand showers and showerheads unless otherwise stated) and can be replaced with any of the following KI: Chrome KF: Matt Black DA: Warm sunset GL: Cool Sunrise DL: Brushed warm sunset DC: Super steel AL: Brushed Graphite GN: Brushed cool sunrise MS0: Satin Steel (showerhead only) MG0: Satin Graphite (showerhead only)

Approval Holder:: Xiamen Solex High-Tech Industries Co., Ltd.

Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company

WRAS Approval Number: #260302301

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Undefinable Air Gap – See IRN’s
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 31/03/2031

Product Identification	Surface Finish / Colour	Dimension	Max Working Pressure (bar)	Max Operating Temp (°C)	Marking	Marking location	All metals in the water pathway are on the 4msi positive list	Includes
1001450AQXX	various	1/2" BSP (F)	Open outlet	60	Aqualisa	Body	No	Fixed Head
1001447AQXX	various	1/2" BSP (F)	Open outlet	60	Aqualisa	Body	No	Fixed Head
1001445AQXX	various	1/2" BSP (F)	Open outlet	60	Aqualisa	Body	No	Fixed Head

Notes & Further Information: Fixed Head in 4 different colours - Chrome, Matt Black, Brushed Brass and Gunmetal Grey AQ = Aqualisa XX = AA , AD , AJ , AH AQAA - Chrome AQAD - Matt Black AQAJ - Gunmetal Grey AQAH - Brushed Brass

Approval Holder:: Aqualisa Products Ltd.

Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company
Manufacturers:: Xiamen Solex High-Tech Industries Co.,Ltd