Range of in line double regulating valves with DZR brass bodies, EPDM ‘O’-rings and PTFE valve seals. The valves incorporate a non-rising spindle headwork regulating the flow and isolation function with a handwheel operating member. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

2203049

Size:

see model

Marking:

Size, PN, flow arrow, CR and "P" for Pegler on body. Pegler on handwheel.

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

1200SF Pattern No. - Double regulating valves: 126002: ½” BSP (F), 126003: ¾” BSP (F), 126004: 1” BSP (F), 126005: 1 ¼” BSP (F), 126006: 1 ½” BSP (F), 126007: 2” BSP (F).

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of commercial front loading washing machines with flow controlled by solenoid valve and discharged via a type AD air gap arrangement (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with a single check valve assembly (suitable for backflow protection against Fluid Category 2) and PEX lined rubber inlet connections hoses. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2201082

Size:

¾” BSP captive nut (to inlet hoses)

Marking:

GIRBAU on soap draw.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

WM75.C & WM85.C

Product Images

Approval Holder:

Girbau S.A.

Company Name

Girbau S.A.

Address

Carretera de Manlleu, KM 1, Vic

Postcode

08500

Country

Spain

Phone

+34659242864

General Email

jsana@girbau.com

View All Listings by this Company

Range of UV disinfection units with stainless steel bodies and EPDM seals. The UV lamps are housed inside quartz tubes. Maximum working pressure 10.3 bar. Maximum operating temperature 40°C.

Section:

2411 Disinfection Equipment

Size:

Please refer to model.

Marking:

‘LUMINOR BLACKCOMB’ and ‘LUMINOR’ logos, model and technical information on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

31/05/2027

Model:

LBx-02X (½” female NPT). LBx-03X & LBx-10X (½” male NPT). LBx-06X (¾” male NPT). LBx-08X, LBx-15X & LBx-20X (1” male NPT). LBHx-05X & LBHx-10X (¾” male NPT). LBHx-15X & LBHx-25X (1” male NPT) LBHx-40X (1½” male NPT inlet and outlet). ‘x’ denotes controller option and can be replaced with: 4 = controller does not support UV sensor, ships with plug as standard. 5 = can accept optional UV sensor, ships with plug as standard. 6 = controller is same as LB5, but the LB6 system ships with UV sensor as standard. ‘X’ denotes power cord and can be replaced with 1, 2, 3 or 4.

Product Images

Approval Holder:

Luminor Environmental Inc.

Company Name

Luminor Environmental Inc.

Address

80 Southgate Drive, Unit 4, Guelph, ON Guelph

Postcode

N1G 4P5

Country

Canada,

View All Listings by this Company

Manufacturer:

Luminor Environmental Inc.

Company Name

Luminor Environmental Inc.

Address

80 Southgate Drive, Unit 4, Guelph, ON Guelph

Postcode

N1G 4P5

Country

Canada,

View All Listings by this Company

'SOLID-02'. Factory applied, black coloured, bituminous coating. Apply as per manufacturer's user instructions 'File No.: SOLID-0069, Vison: SLD-03, Date of issue: 2015-01-01'. Cure for 2 hours @60°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

2205506

Expiry date:

31/05/2027

Approval Holder:

Shanxi Solid Industrial Co., Ltd.

Company Name

Shanxi Solid Industrial Co., Ltd.

Address

28F, No.8 Changxing South Street, Jinyuan District, Taiyuan, Shanxi

Country

China

View All Listings by this Company

'Eurokote® 47-20 Brun Rouge'. Factory applied, red coloured (once mixed and applied), two-component epoxy coating. Mix resin and hardener in an 80:20 mass ratio and apply as per manufacturer's instructions dated '15/06/2021'. Cure for 7 days@20°C. For use with water up to 60°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2204521

Expiry date:

30/04/2027

Approval Holder:

BS Coatings

Company Name

BS Coatings

Address

Allee Paul Sabatier, BP 88, 27940 Aubevoye

Country

France

Phone

+ 33 32773077

View All Listings by this Company