Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250755026

'SML-EP012EB'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C. When processing an application for WRAS Product Approval the in-radius tolerance rule cannot be applied, i.e. only the material with an in-radius of 1.0mm is covered by the scope of the approval.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 250755026
Expiry date:: 31/07/2030

Approval Holder:: Suzhou Meilong Rubber & Plastic Products Co., Ltd

Company Name
Suzhou Meilong Rubber & Plastic Products Co., Ltd
Address
No.2 Zone 1,WeiBei Industrial Zone, Yudai Road, WeiTang Town, XiangCheng District, SuZhou City, JiangSu Province
Country
China

View All Listings by this Company

WRAS Approval Number: #250755029

'EPDM SP-002 SEALING'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 250755029
Expiry date:: 31/07/2030

Approval Holder:: Huachuang Rubber (Tianjin) Co., Ltd.

Company Name
Huachuang Rubber (Tianjin) Co., Ltd.
Address
No. 36, 3rd Road, Xiaozhan Industrial Zone, Jinnan District, Tianjin City
Country
China

View All Listings by this Company

WRAS Approval Number: #250655040

'AP-EPDM 50A, AP-EPDM 60A, AP-EPDM 70A & AP-EPDM 80A'. Black coloured, compression moulded EPDM materials. Shore hardness between 50A & 80A. Tested in-radius size between 1.15mm & 1.21mm. For use with water up to 65°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 250655040
Expiry date:: 30/06/2030

Approval Holder:: AGAM Polymers Private Limited

Company Name
AGAM Polymers Private Limited
Address
30/37 A, West Patel Nagar, New Delhi -110008
Country
India

View All Listings by this Company

WRAS Approval Number: #2307545

'EP 70110 HC'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 1.56mm. For use with water up to 23°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2307545
Expiry date:: 31/07/2028

Approval Holder:: Zenith Industrial Rubber Products Pvt. Ltd.

Company Name
Zenith Industrial Rubber Products Pvt. Ltd.
Address
141/144, 14th Floor, Free Press House, Free Press Journal Marg, 215 Nariman Point, Mumbai - 400 021
Country
India

View All Listings by this Company

WRAS Approval Number: #250514308

Section:: 0463 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.
Deck Mounted. Stainless Steel Braided EPDM lined inlet hoses. Capable of achieving AUK3 Tap Gap .
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R020
Expiry date:: 31/05/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
193745 X XXX	VARIOUS	1/2" BSP	5.0 bar	65 °C	PPI	REAR OF BODY	No	Ceramic cartridge	C-plate	Flow Straightener	Flow Regulator Fitted, Shower Hose, Handset,

Notes & Further Information: X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A (Lever type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Product Images

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturers:: PPI XIAMEN INDUSTRY CO LTD