Range of gate valves incorporating blue epoxy coated ductile iron bodies. EPDM coated ductile iron wedges and a non-rising spindle headwork. Some models incorporate a bypass. Maximum working pressure 16.0 bar. Maximum operating temperature 45°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

260188006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

AVK, PN and DN on both the body and label on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

2105035#140069 2108035#140069 2110035#140069 2115035#140069 2120035#140069 2125035#140069 2130035#140069 2135035#140069 2140035#140069 Where # is: 2 – Clockwise to close, fitted with BS 5163 stemcap (white insert) (All sizes) 3 - Clockwise to open, fitted with BS 5163 stemcap (red insert) (All sizes) G – Clockwise to close, fitted with BS 5163 stemcap (white insert), Bypass fitted (DN350+400 ONLY) H - Clockwise to open, fitted with BS 5163 stemcap (red insert), Bypass fitted (DN350+400 ONLY)

Approval Holder:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Country

United Kingdom

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

Manufacturer:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Country

United Kingdom

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

Range of balancing valves with blue epoxy coated ductile iron bodies incorporating blue epoxy coated ductile iron (DN50~DN150) or stainless steel discs (DN200~DN300), EPDM gaskets and ‘O’-rings, handwheel operating member and a measuring port at each flanged end. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2348 Valves

Section Subtitle:

Balancing.

WRAS Approval Number:

260115002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50~DN300 flanged

Marking:

Brand logo (OTTO plus), model, WRAS, size, PN, material and production date (YYYY.MM) on data plate on body. ‘OTTO’ (brand of Barr Al Aman Int’l. Investment Co., Ltd.), PN, DN and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

OW-DRV-16Q

Approval Holder:

Barr Al-Amman International

Company Name

Barr Al-Amman International

Address

Sanibil Centre Azizia District Baladia Street Jeddah

Country

Saudi Arabia

Phone

+966 056 652 5154

General Email

hafiz@barralaman.com.sa

View All Listings by this Company

'Dicoat Medium Temp Black'. Factory applied, black coloured bitumen coating. Apply at a Relative Humidity of below 60% as per manufacturer's user instructions reference 'SPL/RD/UI/2019100121', issue no. '01' dated 08.07.2020. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the RH & curing conditions that appear on the approval. If the RH and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

251155070

Expiry date:

30/11/2030

Approval Holder:

Shalimar Paints Limited

Company Name

Shalimar Paints Limited

Address

Nashik Mumbai NH Road, Gonde, Nashik, Maharashtra 422403

Country

India

View All Listings by this Company

'Nav-Coat Bitumen Paint 001 Black'. Factory applied, black coloured bitumen coating. Apply as per manufacturer's product information sheet issued '10.07.2009'. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

260155045

Expiry date:

31/01/2031

Approval Holder:

Nav Durga Chromatics Private Limited

Company Name

Nav Durga Chromatics Private Limited

Address

Jivan Nivas, 30A Block-R, New Alipore, 2nd Floor, Kolkata 700053

Country

India

Phone

+91 33 3254 6025/+91 98308 48300

General Email

navcoat@yahoo.co.in/navcoat@gmail.com

View All Listings by this Company

'Eco Coat FBE Red RAL 3013' (red coloured) & 'Eco Coat FBE Blue RAL 5017' (blue coloured). Factory applied Epoxy coatings. Apply as per manufacturer's Instructions for Use 'Doc. No.:SPPR/L3/WI/PRD/28A'. Cure for 45 minutes@220°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

251155072

Expiry date:

30/11/2030

Approval Holder:

Star Pipe Foundry (India) Pvt. Ltd.

Company Name

Star Pipe Foundry (India) Pvt. Ltd.

Address

Revenue Survey No. 50, Kotada Sangani, Near NH 8-B, 2 KM From Bhunava Toll Plaza, Tirth Agro Technology Hadamtala, Rajkot, Gujarat 360030

Country

India

View All Listings by this Company