Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240702059

‘Qualflex Excel’ range of stainless steel over braided, PEX lined flexible hoses, incorporating EPDM or fibre washers. The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves. Push-fit fittings for use for with: Copper Pipes manufactured in accordance with BS EN 1057 Plastic PB pipes manufactured in accordance with BS 7291-2 Plastic PEX pipes manufactured in accordance with BS 7291-3 Maximum working pressure: 6.0 bar. Maximum operating temperature: 65°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 240702059
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Qualflex, QWRAS, year of manufacture (YY) and temperature and pressure on ferrule.
Installation Requirements:: R001 R008
Expiry date:: 31/07/2029
Model:: 06PEX 08PEX 10PEX 12PEX Plastic Qualflex Pusfit: 15 - 22mm Polypipe Pushfit: 15 & 22mm John Guest Pushfit: 15 & 22mm Qualflex Valved Pushfit: 15 - 22mm Flat faced Straight: 1/2" & 3/4" BSP captive nut Flat faced Straight: 1/2" & 3/4" BSP captive nut Standpipe: 6mm - 15mm Flat Faced Female Elbow: 3/4" BSP captive nut Retained Female Straight: 1/2" & 3/4" BSP captive nut Retained Female Straight: 1/2" & 3/4" BSP captive nut Retained Female Elbow: 3/4" BSP captive nut Brass Pushfit: 10mm - 15mm Qualflex pushfit: 10mm - 22mm Compression with Iso Valve: 15 & 22mm Compression: 15 - 28mm Flat Faced Straight: 3/8” - 1.1/4" BSP captive nut. Flat Faced Female Elbow: 3/8" - 1" BSP captive nut Retained Female Straight: 3/8" - 3/4" BSP captive nut. Retained Female Elbow: 3/8" - 3/4" BSP captive nut Coned Female Straight: 1/4" - 1/2" BSP captive nut Coned Female Elbow: 1/4" - 1/2" BSP captive nut Female Straight: 7/16" UNF Captive nut Male Straight: 1/4" - 1” BSP Male Straight: 3/8" NPT Standpipe: 3/8" & 10mm - 28mm Monoblock: M8, M10 & M12

Approval Holder:: Hydralectric Group Ltd.

Company Name
Hydralectric Group Ltd.
Address
5 High Road, Byfleet, Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company

WRAS Approval Number: #240202092

Range of stainless-steel braided EPDM lined flexible hose assemblies with EPDM seals, available with a variety of end connections, some of which include isolation valves (see model). Maximum working pressure 10 Bar. Maximum operating temperature 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240202092
Size:: See Models
Marking:: Brymec, Size, PN, WRAS and Date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 28/02/2029
Model:: DN10 30909 50cm length & 30925 30cm length - 15mm compression x 1/2"F captive nut 30911 50cm length & 30917 30cm length - 15mm compression x 3/4"F captive nut DN13 30904 50cm length & 30913 30cm length - 15mm compression x 1/2"F captive nut 30927 15mm compression x 3/4"F captive nut 30942 50cm length & 30928 30cm length - 22mm compression x 3/4"F captive nut 30903 DN19 22mm compression x 3/4"F captive nut DN10 30924 - 15mm isolating valve x 1/2"F captive nut DN13 30921- 22mm isolating valve x 3/4"F captive nut 30934 50cm length & 30926 30cm length - 15mm compression x 15mm compression DN13 30945 50cm length & 30932 30cm length- 22mm compression x 22mm compression

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

WRAS Approval Number: #2103350

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103350
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: 316637 15MMXM10X30CM DN8 898868 15MMXM12X30CM DN10 122259 F3/8”X15MM X 30CM DN10 500898 F1/2”X15MM X 30CM DN10 500903 F1/2”X15MM X 50CM DN10 114103 F1/2”X15MM X 100CM DN10 695025 F3/4”X15MM X 30CM DN10 897397 F3/4”X15MM X 50CM DN10 509861 F3/4”X15MM X 100CM DN10 313144 15MM X15MM X 30CM DN10 508022 15MM X15MM X 50CM DN10 509802 15MM X15MM X100CM DN10 506150 F3/4”X22MM X 30CM DN13 507681 F3/4”X22MM X 50CM DN13 116063 F3/4”X22MM X 100CM DN13 316628 22MM X22MM X 30CM DN13 316600 22MM X22MM X 50CM DN13 699046 F1/2”X15MM ISO VALVE X 30CM DN10 307096 F1/2”X15MM ISO VALVE X 50CM DN10 306887 F3/4”X22MM ISO VALVE X 30CM DN13 897436 F3/4”X22MM ISO VALVE X 50CM DN13

Approval Holder:: The Highbourne Group, City Plumbing Supplies

Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company
Manufacturer:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang
Postcode
317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

WRAS Approval Number: #2103351

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103351
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: 29030007 F1/2" X F1/2”X 30CM DN10 29030008 F3/4" X F3/4”X 30CM DN13 29030011 F3/8”X15MM X 30CM DN10 29030020 F1/2”X15MM X 30CM DN10 29030065 F1/2”X15MM X 50CM DN10 29030101 F1/2”X15MM X 90CM DN10 29030104 F1/2”X15MM X 100CM DN10 29030119 F3/4”X15MM X 30CM DN10 29030137 F3/4”X15MM X 50CM DN10 29030141 F3/4”X15MM X 100CM DN10 29030236 15MM X15MM X 30CM DN10 29030272 15MM X15MM X 50CM DN10 10000201 15MM X15MM X 100CM DN10 29030245 15MM X15MM X 30CM DN13 29030281 15MM X15MM X 50CM DN13 29030029 F1/2”X15MM X 30CM DN13 29030074 F1/2”X15MM X 50CM DN13 29030110 F1/2”X15MM X 100CM DN13 29030155 F3/4”X22MM X 30CM DN13 29030191 F3/4”X22MM X 50CM DN13 29030218 F3/4”X22MM X 90CM DN13 29030221 F3/4”X22MM X 100CM DN13 29030128 F3/4”X15MM X 30CM DN13 29030146 F3/4”X15MM X 50CM DN13 29030290 22MM X22MM X 30CM DN13 10000202 22MM X22MM X 50CM DN13 29030047 F1/2”X15MM ISO VALVE X 30CM DN10 29030083 F1/2”X15MM ISO VALVE X 50CM DN10 29030254 15MM X15MM ISO VALVE X 30CM DN10 29030182 F3/4”X22MM ISO VALVE X 30CM DN13 29030209 F3/4”X22MM ISO VALVE X 50CM DN13 29030400 F1/2”X15MM PUSHFIT X 30CM DN10 29030402 F1/2”X15MM PUSHFIT X 50CM DN10 29030404 F3/4”X15MM PUSHFIT X 30CM DN10 29030406 F3/4”X22MM PUSHFIT X 30CM DN13 29030408 F1/2”X15MM PUSHFIT WITH ISO VALVE X 30CM DN10 29030410 15MM PUSHFIT X15MM PUSHFIT X 30CM DN10 29030164 F3/4”X22MM X 30CM DN19 29030200 F3/4”X22MM X 50CM DN19 29030227 F3/4”X22MM X 90CM DN19 29030308 15MM X 10MMX30CM DN8 29030317 15MM X 12MMX30CM DN10

Approval Holder:: Primaflow F & P

Company Name
Primaflow F & P
Address
Votec House, Hambridge Lane, Newbury
Postcode
RG14 5TN
Country
United Kingdom

View All Listings by this Company
Manufacturer:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang
Postcode
317600
Country
China
Phone
86-576-89901684

View All Listings by this Company

WRAS Approval Number: #240502056

Range of stainless-steel braided EPDM lined flexible hose assemblies. Compression connections are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240502056
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: F3/8: ⅜” captive nut, F3/8 elbow: ⅜” captive nut (elbow), F1/2: ½” captive nut, F1/2 elbow: ½” captive nut (elbow), F3/4: ¾” captive nut, F3/4 elbow: ¾” captive nut (elbow), M8x1: M8x1, M10x1: M10x1, M12x1: M12x1, M3/8: ⅜” BSP (M), M1/2: ½” BSP (M), M3/4: ¾” BSP (M), T10: 10mm fitting with plain and short smooth tube with recess, 10MM: 10mm compression, 12MM: 12mm compression, 14MM: 14mm compression, 16MM: 16mm compression.
Marking:: AMG logo (‘AMG’), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 30/04/2027
Model:: AMG-E-SS-F3/8-F3/8-DN8, AMG-E-SS-F3/8-M1/2-DN8, AMG-E-SS-F3/8-M8X1-DN8, AMG-E-SS-F3/8-M10X1-DN8, AMG-E-SS-F3/8-M12X1-DN8, AMG-E-SS-F3/8-M3/8-DN8, AMG-E-SS-F3/8-F3/8 elbow-DN8, AMG-E-SS-F1/2-F3/8-DN8, AMG-E-SS-F1/2-F1/2-DN8, AMG-E-SS-F1/2-M1/2-DN8, AMG-E-SS-F1/2-M8X1-DN8, AMG-E-SS-F1/2-M10X1-DN8, AMG-E-SS-F1/2-M12X1-DN8, AMG-E-SS-F1/2-M3/8-DN8, AMG-E-SS-F1/2-F1/2 elbow-DN8, AMG-E-SS-F3/4-F3/4-DN8, AMG-E-SS-F3/4-M1/2-DN8, AMG-E-SS-F3/4-M3/4-DN8, AMG-E-SS-F3/4-F3/4 elbow-DN8, AMG-E-SS-M1/2-F1/2 elbow-DN8, AMG-E-SS-M3/4-F3/4 elbow-DN8, AMG-E-SS-M3/8-F3/8 elbow-DN8, AMG-E-SS-F3/8-T10-DN8, AMG-E-SS-F3/8-10MM-DN8, AMG-E-SS-F3/8-12MM-DN8, AMG-E-SS-F1/2-T10-DN8, AMG-E-SS-F1/2-10MM-DN8, AMG-E-SS-F1/2-12MM-DN8, AMG-E-SS-F1/2-14MM-DN8, AMG-E-SS-F3/4-16MM-DN12, AMG-E-SS-M1/2-10MM-DN8, AMG-E-SS-M1/2-12MM-DN8, AMG-E-SS-M1/2-14MM-DN8, AMG-E-SS-M3/8-10MM-DN8, AMG-E-SS-M3/8-12MM-DN8, AMG-E-SS-F3/4-F3/4-DN10, AMG-E-SS-F1/2-F1/2-DN10, AMG-E-SS-F1/2-M1/2-DN10, AMG-E-SS-F3/8-M10X1-DN10, AMG-E-SS-F3/8-M12X1-DN10, AMG-E-SS-F1/2-F1/2 elbow-DN10, AMG-E-SS-F3/4-M1/2-DN10, AMG-E-SS-F3/4-M3/4-DN10, AMG-E-SS-F3/4-F3/4 elbow-DN10, AMG-E-SS-F1/2-M10X1-DN10, AMG-E-SS-F1/2-M12X1-DN10, AMG-E-SS-M1/2-F1/2 elbow-DN10, AMG-E-SS-M3/4-F3/4 elbow-DN10, AMG-E-SS-F3/4-F3/4-DN12, AMG-E-SS-F1/2-F1/2-DN12, AMG-E-SS-F3/4-M3/4-DN12, AMG-E-SS-F3/4-F3/4 elbow-DN12, AMG-E-SS-M1/2-F1/2 elbow-DN12, AMG-E-SS-M3/4-F3/4 elbow-DN12, AMG-E-SS-F3/4-M1/2-DN12, AMG-E-SS-F1/2-F1/2 elbow-DN12.

Product Images

Approval Holder:: Yuhuan AMG Just Valve Co., Ltd

Company Name
Yuhuan AMG Just Valve Co., Ltd
Address
M&E Industrial Zone, Yuhuan, Zhejiang
Country
China
Phone
86 576 87281908
General Email
trading@amg.com.cn

View All Listings by this Company
Manufacturer:: Yuhuan AMG Just Valve Co., Ltd

Company Name
Yuhuan AMG Just Valve Co., Ltd
Address
M&E Industrial Zone, Yuhuan, Zhejiang
Country
China
Phone
86 576 87281908
General Email
trading@amg.com.cn

View All Listings by this Company

WRAS Approval Number: #240704012

Range of stainless steel or nylon braided EPDM lined flexible hose assemblies with various brass end connections. Compression connection to be used with copper pipe EN1057. Maximum working pressure 10 Bar. Maximum operating temperature 70°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240704012
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see models
Marking:: Lux, WRAS, Date of Manufacture (YY), PN&DN stamped on crimped connector
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: Bore diameter – DN6 Male M8, M10, M11, 3/8" BSP Male M15x1 swivel Female w/gasket 9/16” UNEF/UNEF (H.N.), 1/2” BSP, 3/8” BSP Female 3/8” BSP, 1/2” BSP Bore diameter – DN8 Male M10, M11, M12, 3/8" BSP Male M15x1 swivel Female w/gasket 9/16” UNEF/UNEF (H.N.), 1/2” BSP, 3/8” BSP Female 3/8” BSP, 1/2” BSP Female 1/2” BSP female with swivel conical nut and o-ring Female Elbow 1/4” BSP, 3/8” BSP Female Elbow 3/8” BSP w/gasket Compression 15mm Plug in 10mm (with 2 'O'-rings) Bore diameter – DN10 Male M12, 3/8" BSP, 1/2” BSP Female w/gasket 1/2” BSP, 3/8” BSP, 3/4” BSP Female 1/2” BSP Female Elbow 1/2” BSP, 3/4” BSP Female Elbow 1/2” BSP w/gasket, 3/4” BSP w/gasket Compression 15mm Plug in elbow 18.6mm Straight Plug in 17mm Bore diameter – DN13 Male 1/2” BSP, 3/4" BSP Female w/gasket 1/2” BSP, 3/4” BSP Female 3/4"BSP Female Elbow 1/2” BSP, 3/4” BSP Female Elbow 1/2” BSP w/gasket, 3/4” BSP w/gasket Compression 15mm Plug in 12mm, 15mm, 29mm, 29mm long Plug in elbow 18mm, 23.6mm, 28mm

Product Images

Approval Holder:: LUXOR S.p.A.

Company Name
LUXOR S.p.A.
Address
Via Madonnina, 94 Montichiari (BS)
Postcode
25018
Country
Italy
Phone
+39 030 9961161
General Email
marco.cauzzi@luxor.it

View All Listings by this Company
Manufacturer:: LUXOR S.p.A.

Company Name
LUXOR S.p.A.
Address
Via Madonnina, 94 Montichiari (BS)
Postcode
25018
Country
Italy
Phone
+39 030 9961161
General Email
marco.cauzzi@luxor.it

View All Listings by this Company

WRAS Approval Number: #241002078

Nylon and stainless-steel braided EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241002078
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to models.
Marking:: Hualing logo, WRAS and date of manufacture (YYYY) on ferrule
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: HL-SS-XX-XX-XXX-XXX SS=Stainless Steel Braided Hose XX: Connection sizes: 01=F3/8 02=F1/2 03=F3/4 04=F15*1 05=M3/8 06=M1/2 07=M3/4 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm ID or 11mm OD Note: Connection 01, 02, 04, 05, 06, 08, 09, 10, 11, 12 applicable for DN6. Connection 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12 applicable for DN8. Connection 01, 02, 03, 04, 05, 06, 07, 08 applicable for DN10. Connection 02, 03, 06, 07 applicable for DN14. 1st XXX: Hose inner size: 006= DN6, 008= DN8, 010= DN10, 014= DN14. 2nd XXX: Hose length: 15CM - 200CM. HL-N-XX-XX-XXX-XXX N=Nylon Pull out Hose. XX: Connection sizes: 01=F3/8 02=F1/2 08=M15 09=M12 10=M10 11=M8 12=Pushfit 11mm OD 1st XXX: Hose inner size: 006= DN6, 008= DN8. 2nd XXX: Hose length: 15CM - 200CM.

Approval Holder:: Kaiping City Hualing Hoses Co Ltd

Company Name
Kaiping City Hualing Hoses Co Ltd
Address
No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province
Country
CHINA

View All Listings by this Company
Manufacturer:: Kaiping City Hualing Hoses Co Ltd

Company Name
Kaiping City Hualing Hoses Co Ltd
Address
No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province
Country
CHINA

View All Listings by this Company

WRAS Approval Number: #240704037

Range of stainless steel braided hoses with EPDM liner and NBR or fibre gaskets. DN13 and DN19 Maximum working pressure 10 bar. Maximum operating temperature 65°C. DN25 Maximum working pressure 10 bar. Cold water use only.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240704037
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see model
Marking:: APL, Date of manufacture (YYYY) and WRAS stamped on ferrule.
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: H786 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H782 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H783 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H784 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H785 13mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H980 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.5m H979 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H978 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H977 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H976 13mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H775 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.5m H769 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.25m H772 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 1.0m H773 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.75m H774 19mm stainless steel braided hose 3/4" F STR x 3/4" F BENT 0.5m H981 19mm stainless steel braided hose 3/4" F BENT x 3/4” F BENT 1.5m H829 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.25m H830 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 1.0m H831 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.75m H832 19mm stainless steel braided hose 3/4" F BENT x 3/4" F BENT 0.5m H984 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.5m H767 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.25m H833 25mm stainless steel braided hose 1” F STR x 1” F BENT 1.0m H768 25mm stainless steel braided hose 1” F STR x 1” F BENT 0.75m H989 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.5m H988 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.25m H987 25mm stainless steel braided hose 1” F BENT x 1” F BENT 1.0m H986 25mm stainless steel braided hose 1” F BENT x 1” F BENT

Product Images

Approval Holder:: Aquamatic Products Limited

Company Name
Aquamatic Products Limited
Address
3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire
Postcode
L40 8AF

View All Listings by this Company
Manufacturer:: Aquamatic Products Limited

Company Name
Aquamatic Products Limited
Address
3A & 3B Dakota Business Park, Dakota Way, Burscough, West Lancashire
Postcode
L40 8AF

View All Listings by this Company

WRAS Approval Number: #2012117

Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2012117
Note:: Open outlet use only.
Marking:: DTC15, WRAS and date of manufacture (MM/YY) on captive nut.
Installation Requirements:: R001
Expiry date:: 31/12/2025
Model:: ½” BSP (F) conical or captive nut. D50010024 HOS1.5PVS07 HOS1.5PVS07BB HOS1.5PVS07BK HOS1.5PVS07BN HOS1.5PVS07GM HOSE2.0 HOS1.0PVS07 SHOWER HOSES

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #240704052

Range of stainless-steel expansion joints with flanged or threaded end connections. For maximum working pressure please refer to model. Maximum operating temperature 100°C.

Section:: 1870 Tubes
Section Subtitle:: Flexible - Metal.
WRAS Approval Number:: 240704052
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Model number
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: Threaded connections: Maximum working pressure 16.0 bar: JP20BS, JP20HS, JP250BS, JP250HS: ½", ¾”, 1”, 1¼”, 1½”, 2”, 2½” & 3” BSP (M). Flanged connections: Maximum working pressure 16.0 bar: JP251FS & JP251VS:15mm, 20mm, 25mm, 32mm, 40mm, 50mm, 65mm, 80mm & 100mm. Maximum working pressure 14.0 bar. JP251FS & JP251VS:125mm. Maximum working pressure 8.0 bar: JP251FS & JP251VS: 200mm. Maximum working pressure 10.0 bar JP251FS & JP251VS: 150mm.

Approval Holder:: Stourflex Ltd

Company Name
Stourflex Ltd
Address
Junction Road Audnam Stourbridge
Postcode
DY8 4YH
Country
United Kingdom
Phone
+441384 393 329
General Email
james.croydon@stourflex.co.uk

View All Listings by this Company