Range of air venting valves incorporating an epoxy coated, iron body and a drain point. Maximum working pressure 16.0 bar. Maximum operating temperature 60˚C.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

2104083

Note:

Fittings in this section are suitable for above ground installations only.

Size:

See model.

Marking:

Saint-Gobain PAM, DN, PN, model and year of manufacture (YYYY) on data plate. Size and year of manufacture (YYYY) on body.

Installation Requirements:

R001

Expiry date:

30/04/2026

Model:

Double orifice FB/L 1” & 2” BSP female inlet. DN50 - DN200. Double orifice with anti-surge FBA/LA 1” & 2” BSP female inlet DN50 - DN200. Double orifice with rapid fill protection FBR/LR 1 & 2” BSP female inlet DN50 - DN200.

Approval Holder:

Saint-Gobain PAM Italia s.r.l

Company Name

Saint-Gobain PAM Italia s.r.l

Address

Via Bensi 8-20152

Country

Italy

View All Listings by this Company

Manufacturer:

Saint-Gobain PAM Italia s.r.l

Company Name

Saint-Gobain PAM Italia s.r.l

Address

Via Bensi 8-20152

Country

Italy

View All Listings by this Company

Range of wall mounted, concealed, manually operated blending valves with brass bodies (various finish trim kits - see model) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

2104084

Note:

This approval does not include a shower hose, shower handset or spout outlet.

Size:

½” BSP (F)

Marking:

Bagnodesign on faceplate.

Installation Requirements:

R001 R010 R040

Expiry date:

30/04/2026

Model:

BRISTOL CONCEALED SHOWER MIXER BDM-BIS-410L-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS) Burgundy (BUR) Black (MB-C)

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of piston type float operated inlet valves with brass bodies. The valves discharge from a downwards atmospheric discharge arrangement on the underside of the body. Maximum working pressure: 3.0 (1MFVLP104 models only) or 14.0 Bar (all other models) Cold water use only.

Section:

2120 Valves

Section Subtitle:

Float operated, piston type, metal body.

WRAS Approval Number:

2109072

Note:

No float supplied.

Size:

Please refer to models.

Marking:

MF on valve body.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

MFVHP104 & MFVHP1046 - 1/2” BSP (M) – Inlet Shank: 2” or 3” MFVLP104 : 1/2” BSP (M) – Inlet Shank: 2” or 3” MFVHP106 : ¾” BSP (M) Inlet Shank 2” or 4”

Approval Holder:

Masterflow Products Limited

Company Name

Masterflow Products Limited

Address

Globall House 95 Vantage Point West Mindlands

Postcode

DY6 7FT

Country

United Kingdom

View All Listings by this Company

Range of non return valves with bronze bodies and discs, and an EPDM washer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

2188 Valves

Section Subtitle:

Non-return, swing gate, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should be made to `Backflow Prevention Devices`.

WRAS Approval Number:

2101376

Size:

See model.

Marking:

Vantec, size, flow arrow, 150WSP and 300WOG on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

VAC703 Size: ½” - 2” BSP (F), NPT (F) or BSPP (F).

Approval Holder:

Vantec Industrial

Company Name

Vantec Industrial

Address

128, City Road, London

Postcode

EC1V 2NX

Country

United Kingdom

Phone

+971543038194

General Email

A.OMER@VANTECINDUST.CO.UK

View All Listings by this Company

Range of domestic, salt regenerated ion exchange water softeners. Maximum working pressure 6.0 bar. Cold water use only.

Section:

2450 Water softeners

Size:

¾” BSP (M) inlet/outlet.

Marking:

Company Log, product name on front panel.

Installation Requirements:

R001 R150 R170 R290 R415

Expiry date:

31/10/2026

Proviso:

Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.

Model:

Monarch MTS 10 Ultra HE Pro Premio HE Pro Monarch MTS20

Approval Holder:

Monarch Water Ltd

Company Name

Monarch Water Ltd

Address

Fair Green Diss Norfolk

Postcode

IP22 4DG

Country

United Kingdom

Phone

01986 784759

General Email

kdelaney@monarchwater.co.uk

View All Listings by this Company