Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure:8.0 Bar Maximum operating temperature:65 °C

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

250902031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided, PEX lined hose incorporating 3/8" BSP (F) captive nut end connection

Marking:

Stern on top of tap body

Installation Requirements:

R001 R006 R009

Expiry date:

30/09/2030

Model:

212000 – Boreal B 212005 – Boreal E 212010 – Boreal Plus B 212015 – Boreal Plus E

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass), flow is controlled by a solenoid valve, activated via an infra-red sensor. The product is supplied with a combined TPE washer and stainless-steel strainer to be installed on the inlet to the solenoid. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

251008003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

R008 applies to solenoid only.

Size:

½” BSP (M) on solenoid.

Marking:

INTA, date of manufacture (WW/YY) and model on body.

Installation Requirements:

R001 R006 R008

Expiry date:

31/10/2030

Model:

IR120CP.1 (battery operated). IR121CP.1 (Mains operated).

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of bottom and side entry BS1212-4 (2016) compact type float operated inlet valves, for WC flushing cisterns with plastic bodies and adjustable floats and a plastic flow regulator at the inlet. Maximum operating pressure: 10 bar. Maximum operating temperature: 23°C.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

250904710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

IRN R560 only applied to model AG104 PLUS BOTTOM.

Size:

See models.

Marking:

OLI & BS1212-4 on body.

Installation Requirements:

R001 R550 R560

Expiry date:

30/09/2030

Model:

AG104 PLUS SIDE - ½” BSP (M), AG104 PLUS VERTICAL - 3/8” Captive Nut, AG104 PLUS BOTTOM - ½” BSP (M).

Approval Holder:

Oli-Sistemas Sanitarios, S.A

Company Name

Oli-Sistemas Sanitarios, S.A

Postcode

3800-314 Aveiro

Country

Portugal

General Email

geral@oli-world.com

View All Listings by this Company

Concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

2306097

Size:

½” BSP (M)

Marking:

WRAS, Model name and MyLife on front panel. 6 Litre inside of cistern.

Installation Requirements:

R001 R556 R581

Expiry date:

30/06/2028

Model:

MLSOL825WHF

Approval Holder:

MyLife Bathrooms Limited

Company Name

MyLife Bathrooms Limited

Address

Greenbank Industrial Estate Rampart Road Newry

Postcode

BT34 2QU

Country

United Kingdom

Phone

07835115808

General Email

cahal.lynch@mylifebathrooms.com

View All Listings by this Company

Concealed WC dual flushing cistern with a bottom entry BS 1212 - 4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar, cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

2212119

Size:

½” BSP (M)

Marking:

WRAS, Model name and MyLife on front panel. 6 Litre inside of cistern.

Installation Requirements:

R001 R280 R556 R560 R571 R581

Expiry date:

31/12/2027

Model:

MLSOL1000WHF (500mm) with frame MLSOL1135WHF (500mm) with frame MLSOLIWC (500mm) without frame

Approval Holder:

MyLife Bathrooms Limited

Company Name

MyLife Bathrooms Limited

Address

Greenbank Industrial Estate Rampart Road Newry

Postcode

BT34 2QU

Country

United Kingdom

Phone

07835115808

General Email

cahal.lynch@mylifebathrooms.com

View All Listings by this Company