Directory Search Results

Fittings Materials
Print List

#2110004

‘e-SH’ range of centrifugal booster pumps with a blue polymer coated stainless steel body, stainless steel impeller and EPDM ‘O’-rings. Maximum working pressure 12.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2110004
Size:
DN50-100 flanged inlets. DN25-80 flanged outlets.
Marking:
LOWARA (brand of Xylem), CE, maximum temperature and other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
31/10/2026
Model:
e-SH range of pumps Example model code: ESHF 65-160/110A/P25VSNB ESH = Pump series F = Coupling type (blank - bare shaft, E - extended shaft, S - Stub shaft, F - Frame mounted or C - spacer coupling frame mounted). [ ] = motor operation (blank [ ] = standard asynchronous motor, [H] = equipped with Hydrovar, [X] = other drives). 65 = discharge port diameter mm (ranges from DN25-80). 160 = impeller diameter mm (ranges from 125-250). 110 = Motor power (2-3 digits - kW x 10 or D + actual impeller diameter (mm) (bare shaft version)). A = Trimmed impeller (blank - not trimmed, A - trimmed diameter that doesn’t maximise motor power type, X - trimmed diameter to meet customer required duty point). P = motor type (/P, /S, /W, /X). 2 = No. of poles (2 or 4). 5V = electrical voltage and frequency (5H, 5R, 5V, 5P, 5S, 5T, 5W, 6F, 6E, 6P, 6R, 6V, 6U, 6N, 6T). S = Casing material (Stainless steel 1.4404). N = Impeller material (S - Fabricated stainless steel 1.4404 or N - Cast stainless steel 1.4408). B = Mechanical seal option: Ceramic/Carbon/EPDM.
Product Images
Approval Holder:
Xylem Water Solutions UK Ltd
Company Name
Xylem Water Solutions UK Ltd
Address
Private Road 1 Colwick Industrial Estate Colwick
Postcode
NG4 2AN
Country
Nottingham

View All Listings by this Company
Manufacturer:
Xylem Service Italia Srl., Xylem Service Hungary Kft. & Xylem Water Solutions Polska Sp. z o. o.
Company Name
Xylem Service Italia Srl., Xylem Service Hungary Kft. & Xylem Water Solutions Polska Sp. z o. o.
Address

View All Listings by this Company

Print This Approval

#2111366

Range of cold water in tank booster sets incorporating an ‘AG’ air gap, consisting of a GRP water storage cistern incorporating a float operated inlet valve, with a copper float and submersible pump or pumps (depending on model). The products incorporate an externally mounted stainless-steel manifold with servicing valve(s), expansion vessel, pressure gauge and a digital control panel. The pumps are connected to the external components via a discharge assembly of internal pipework including an in-line non-verifiable single check valve assembly (suitable for backflow prevention of Fluid Category 2). Maximum working pressure 10.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2111366
Size:
1" BSP (M)
Marking:
Fluid Water or Stuart Turner, address, product ref, capacity, job ref and contact information on adhesive label on tank body. Fluid Water or Stuart Turner, model, year of manufacturer and serial no on control box.
Installation Requirements:
R001 R280 R415
Expiry date:
30/11/2026
Proviso:
If implemented, the overflow and warning pipe discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.
Model:
IT-A-V-B-C-D-E-F-G-AG Where: IT = Product range name (In Tank). A = Number of pumps (1,2, or 3 pumps). V = Variable speed. B = Maximum flow (l/min per pump - 80 or 120l/min). C = Maximum head (m per Pump, e.g. 60). D = Controller type (MAB). E = Power input (T = 3 Phase – M = 1Phase). F = Vessel Capacity (8 = 8 litre, 24= 24 litre). G = Tank size (Nominal capacity in litres - 250-3000). AG = ‘AG’ air gap. Example: IT-3V-8060-MAB-M/24-1000-AG In Tank booster set with 3 pumps, variable speed, 80l/min max. flow and 60m max. head, MAB controller, 1 phase, 24 litre expansion vessel, 1000 litre capacity with an AG air gap.
Product Images
Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval

#2111367

Range of cold water in tank booster sets incorporating an ‘AB’ air gap, consisting of a GRP water storage cistern incorporating a float operated inlet valve, with a copper float and submersible pump or pumps (depending on model). The products incorporate an externally mounted stainless-steel manifold with servicing valve(s), expansion vessel, pressure gauge and a digital control panel. The pumps are connected to the external components via a discharge assembly of internal pipework including an in-line non-verifiable single check valve assembly (suitable for backflow prevention of Fluid Category 2). Maximum working pressure 10.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2111367
Size:
1" BSP (M)
Marking:
Fluid Water or Stuart Turner, address, product ref, capacity, job ref and contact information on adhesive label on tank body. Fluid Water or Stuart Turner, model, year of manufacturer and serial no on control box.
Installation Requirements:
R001 R280 R415
Expiry date:
30/11/2026
Proviso:
If implemented, the warning pipe discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.
Model:
IT-A-V-B-C-D-E-F-G-AB Where: IT = Product range name (In Tank). A = Number of pumps (1,2, or 3 pumps). V = Variable speed. B = Maximum flow (l/min per pump - 80 or 120l/min). C = Maximum head (m per Pump, e.g. 60). D = Controller type (MAB). E = Power input (T = 3 Phase – M = 1Phase). F = Vessel Capacity (8 = 8 litre, 24= 24 litre). G = Tank size (Nominal capacity in litres - 250-3000). AB = ‘AB’ air gap. Example: IT-3V-8060-MAB-M/24-1000-AB In Tank booster set with 3 pumps, variable speed, 80l/min max. flow and 60m max. head, MAB controller, 1 phase, 24 litre expansion vessel, 1000 litre capacity with an AB air gap.
Product Images
Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval

#2201059

‘EVE Whole house’ twin impeller booster pump with a plastic body and impellers and EPDM ‘O’-rings. The inlet and outlet hoses incorporate a screwdriver operated isolation valve. The pump body outlets incorporate a non-return valve. The product is supplied with two loose combined EPDM and stainless steel inlet washers and two loose EPDM outlet washers. Maximum working pressure 3.0 bar. Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2201059
Size:
Quadruple layered flexible hose consisting of a black coloured TPE inner layer, PVC middle layer, braided PE third layer and grey outer layer with 22mm pushfit end connections.
Marking:
Salamander logo on top cover. Salamander logo, maximum temperature, maximum pressure, and product info on adhesive label on lid. Flow arrow on body.
Installation Requirements:
R001 R150 R415
Expiry date:
31/01/2027
Model:
EVE Whole House Booster Pump: EVETU (twin variant).
Product Images
Approval Holder:
Salamander Pumps
Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company
Manufacturer:
Salamander Pumps
Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company

Print This Approval

#2012099

Range of shower handsets with chrome plated bodies and built in flow restrictors. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2012099
Size:
see model
Marking:
Aqualisa, WRAS and date of manufacture (YYYY/MM/DD) on base of shower handset.
Installation Requirements:
R001 R040
Expiry date:
31/12/2025
Model:
705269- Tubular Hand shower & 700493 - Stilo Quadra Hand Shower SHOWER HANDSETS - ½” BSP (M):
Product Images
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 43 of 189

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.