Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #251055051

'WITCOAT HIGH BUILD BITUMINOUS BLACK PAINT'. Factory applied, black coloured bitumen paint. Apply as per manufacturer's TDS, dated '28.06.2025'. Cure for 72 hours@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5021 Bituminous Based Products
Section Subtitle:: Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:: 251055051
Expiry date:: 31/10/2030

Approval Holder:: M/s. Witmans Industries Private Limited

Company Name
M/s. Witmans Industries Private Limited
Address
205 & 206, Kalpatru Plaza, Chincholi Bunder, Off-S.V Road, Malad (West), Mumbai, MM 400064
Country
India

View All Listings by this Company

WRAS Approval Number: #250955070

'GDPA PermaCoat'. Factory applied, blue coloured (once applied) coating system comprising of a Yellow Zinc Primer and Polyamide top coat. Apply one coat of Yellow Zinc as per work instructions 'PR/WI/01', revision '00', dated '22/11/2017', plating for 45 minutes@30°C. Apply one coat of top coat as per work instructions 'BR/WI/01', revision '00', dated '29/10/2010' and cure for 30 minutes@215°C. For use with water up to 23°C. This material is only approved for the plating and curing conditions that appear on the approval. If the plating and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 250955070
Expiry date:: 30/09/2030

Approval Holder:: GDPA Fasteners

Company Name
GDPA Fasteners
Address
GDPA House, Near Rly Godowns Jalandhar, 144004 Punjab
Country
India

View All Listings by this Company

WRAS Approval Number: #251255018

'BAJ0002'. Factory applied, blue coloured epoxy coating. Pre-heat substrate for 30 minutes@200°C and apply in accordance with manufacturer's Product Instructions 'Version-01 202426 September'. Cure for 10 minutes@200°C. For use with water up to 85°C. This material is only approved for the application and curing conditions that appear on the approval. If the application and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 251255018
Expiry date:: 31/12/2030

Approval Holder:: Tian Jin Ai Yue Powder Coatings Co., Ltd.

Company Name
Tian Jin Ai Yue Powder Coatings Co., Ltd.
Address
No.188,JingChen Road, Jinghai District
Country
China

View All Listings by this Company

WRAS Approval Number: #251255025

'XX-CM1'. Factory applied, grey coloured cement mortar. Mix cement, sand, and water in a volume ratio of 1:2.0:0.4 and apply as per manufacturer's safety data sheet 'A1: 26-01-2020'. Cure for 5 hours@30°C and then steam cure for 6 hours@30°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 251255025
Expiry date:: 31/12/2030

Approval Holder:: Xinxing Ductile Iron pipes Co., Ltd.

Company Name
Xinxing Ductile Iron pipes Co., Ltd.
Address
Wuan City, Hebei Province, 056300
Country
China

View All Listings by this Company

WRAS Approval Number: #260155012

'LOCTITE® SF 770™' (known as 'LOCTITE 770'). Site applied, clear cyanoacrylate primer. Apply as per manufacturer's technical data sheet dated May 2021. Cure for 30 seconds@20°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5042 Coatings, Paints & Linings
Section Subtitle:: Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 260155012
Expiry date:: 31/01/2031

Approval Holder:: Henkel Ltd.

Company Name
Henkel Ltd.
Address
Technologies House, Wood Lane End, Hemel Hempstead
Postcode
HP2 4RQ
Country
Herts
Phone
+44 1442 278 100
General Email
loctite.connect@henkel.com

View All Listings by this Company