Range of stainless-steel braided, EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature: 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250912045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

SODAO, WRAS and year of manufacture (YYYY).

Installation Requirements:

R001 R008

Expiry date:

30/09/2030

Model:

SD-x-xx-xx-xxx Where: “x” = bore diameter: DN8, DN12 or DN20. “xx” = connection sizes: 01 = 1/4” OD (plain pipe for pushfit), 02 = 3/8” OD (plain pipe for pushfit), 03 = F1/2” OD (plain pipe for pushfit), 04 = F3/8”, 05 = M3/8”, 06 = F1/2”, 07 = M1/2”, 08 = F3/4”, 09 = M3/4”, 10 = F1”, 11 = M1”, 12 = Elbow 1/2”, 13 = Elbow 3/4”, 14 = Elbow 1". “xxx” = hose length: 15cm-200cm. Connection: 01, 02, 03, 04, 05, 06, 07, 12 applicable for DN8 only. Connection: 06, 07, 08, 09, 12, 13 applicable for DN12 only. Connection: 08, 09, 10, 11, 13, 14 applicable for DN20 only.

Approval Holder:

SHANGHAI SODAO SANITARYWARE EQUIPMENT CO., LTD

Company Name

SHANGHAI SODAO SANITARYWARE EQUIPMENT CO., LTD

Address

1-2, Building 9, Donglin Science Park, No. 408 Nanwenzao Road, Baoshan District, Shanghai

View All Listings by this Company

Manufacturer:

SODAO PLUMBING TECHNOLOGY (TAIZHOU) CO., LTD

Company Name

SODAO PLUMBING TECHNOLOGY (TAIZHOU) CO., LTD

Address

No.5, Youth West Road, Zhongshan Industrial Zone, Chumen Town, Yuhuan City, Zhejiang

View All Listings by this Company

Range of EPDM braided hoses (various options) and optional end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

260114001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Model

Marking:

Marking: PPI, WRAS & date of manufacture (YYYY) on crimp connector.

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

BZG-A-B-C-XXXX (BZG – Connection A - Connection B – Outer braided material – Length) BZG – The name of our braided tube A-B – Connection A and Connection B (from 01 to 15) 01 = F1/2, 02 = F1/2 Rotating joint, 03 = F3/8, 05 = 15mm compression fitting(17-100), 06 = F15, 07 = F10, 08 = M8*1(L=12-100), 09 = M10*1(L=12-100), 10 = M12*1(L=12-100), 11 = M12*1(two O ring), 12 = M15*1, 13 = T connection（L=2-110), 14 = ￠10 Quick installation connector & 15 = M22*1 C – Outer braided material: SS = stainless steel wire, NY= gray or black nylon wire , SR= stainless steel wire plus red nylon wire, SB= stainless steel wire plus blue nylon wire, NR= gray or black nylon wire plus red nylon wire & NB= gray or black nylon wire plus blue nylon wire. XXXX – Length (15cm to 200cm): 0150=15cm 2000=200cm For example: BZG-01-09-SS-0450 would be for F1/2 x M10, stainless steel braided, 45cm long.

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Range of flexible corrugated stainless-steel tubing with white plastic covering. Compression connections are for use with copper pipe (manufactured to EN 1057). Captive nut end connections incorporate an EPDM gasket. 2BACa0504 prefix models incorporate a servicing valve (chromium plated brass body with brass ball) on the compression end connection. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1870 Tubes

Section Subtitle:

Flexible - Metal.

WRAS Approval Number:

250912031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

IDC, DN, PN, WRAS, year of manufacture (YYYY) on ferrule/end connection. Size on both captive and compression nut. Flow arrow on servicing valve body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

2BACa03042202: 15mm compression x ½” BSP (F), 2BACa03042302: 15mm compression x ¾” BSP (F), 2BACa03043202: 22mm compression x ½” BSP (F), 2BACa03043302: 22mm compression x ¾” BSP (F), 2BACa03032202: 15mm compression, 2BACa03033302: 22mm compression, 2BACa05042202: 15mm compression ISO x ½” BSP (F), 2BACa05042302: 15mm compression ISO x ¾” BSP (F), 2BACa05043202: 22mm compression ISO x ½” BSP (F), 2BACa05043302: 22mm compression ISO x ¾” BSP (F), 2BACa02012202: ½” BSP (F)x(F), 2BACa02013302: ¾” BSP (F)x(F).

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Fluid Control Co Ltd

Company Name

IDC Fluid Control Co Ltd

Address

No.6, Shengyuan Road, Mechanical & Electrical Industrial Zone, Yuhuan City, Taizhou City, Zhejiang Province

Country

China

General Email

View All Listings by this Company

502 series of automatic air venting valves with brass bodies, plastic float and EPDM ‘O’-rings. For non-potable water use only. Maximum working pressure 10.0 bar. Maximum operating temperature see models.

Section:

1980 Valves

Section Subtitle:

Air venting valve(s) Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

260104002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Caleffi logo on body.

Installation Requirements:

R001 R200

Expiry date:

31/01/2031

Model:

502930 TH 3/8" 110°C 502934 CST 3/8" 110°C 502420 1/4" 115 °C 502430 3/8" 115 °C 502430 CON 3/8" 115 °C 502430 CST 3/8" 115 °C 502431 BSC 3/8" 115 °C 502434 CST 3/8" 115 °C 502435 CST 3/8" 115 °C 502530 TH 3/8" 110°C 502530 TH1 3/8" 110°C 502641 3/8" 115°C 502643A 1/2" NPT 115°C 502533 3/8" 110°C 502533 FRT 3/8" 110°C 502533 TAK 3/8" 110°C 502543 3/8" 110°C 502533 RIF 3/8" 110°C 502530 3/8" 110°C 502141 1/2" 110 °C 502142 1/2" 110 °C 502145 RIF 1/2" 110 °C 502145 RSR 1/2" 110 °C 502630 3/8" 115°C 502630 CST 3/8" 115°C 502636 CST 3/8" 115°C 502638 CST 3/8" 115°C 502638 OEM 3/8" 115°C 502631 CST 3/8" 115°C 502822 1/4" NPT 502620A 1/4" NPT 115°C 502610A 1/8" NPT 115°C 502630 WLF 3/8" 115°C 502634 CST 3/8" 115°C 502640 1/2" 115°C 502649 1/2" 115°C 502649 CST 1/2" 115°C 502730 3/8" 110°C 502730 CST 3/8" 110°C 502730 BSC 3/8" 110°C 502730 NTR 3/8" 110°C 502710A 1/8" NPTF 110°C 502720A 1/4" NPTF 110°C 502030 3/8" 120 °C 502030 CON 3/8" 120 °C 502030 CST 3/8" 120 °C 502035 CST 3/8" 120 °C 502037 CST 3/8" 120 °C 502037 VLL 3/8" 120 °C 502037 WLF 3/8" 120 °C 502038 CST 3/8" 120 °C 502020 CST 1/4" 120 °C 502034 CST 3/8" 120 °C 502130 3/8" 110 °C 502031 3/8" 120 °C 502130 TH1 3/8" 110 °C 502033 CST 3/8" 120 °C 502015A 1/8" NPT 120 °C 502015 B&G 1/8" NPT 120 °C 502015A WEB 1/8" NPT 120 °C 502015 MTR 1/8" NPT 120 °C 502040A 1/2" NPT 120 °C 502040A WEB 1/2" NPT 120 °C 502043A 1/2" NPT 120 °C 502043A CST 1/2" 120 °C 502044 CST 1/2" 120 °C 502040 1/2" 120 °C 502040 CST 1/2" 120 °C 502043 1/2" 120 °C 502043 CST 1/2" 120 °C 502140 1/2" 110 °C 502140 FRT 1/2" 110 °C 502041 1/2" 120 °C 502041 MI 1/2" 120 °C 502046 IMM 1/2" 120 °C 502221 1/4" 120°C 502231 3/8" 120°C 502231 CST 3/8" 120°C 502232 TH 3/8" 120°C 502241 1/2" 120°C 502243A 1/2" NPTF 120°C 502343A 1/2" NPTF 120°C 502246 IMM 1/2" 120°C 502242 TH 1/2" 120°C 502115A 1/8" NPT 110 °C 502133 3/8" 110 °C 502131 3/8" 110 °C 502131 TH 3/8" 110 °C 502132 DEC 3/8" 110 °C 502130 CST 3/8" 110 °C 502130 FRT 3/8" 110 °C 502130 TAK 3/8" 110 °C 502130 TH 3/8" 110 °C 502135 RIF 3/8" 110 °C 502050 3/4" 120 °C 502051 3/4" 120 °C 502052 CST 3/4" 120 °C 502060 1" 120 °C 502055 120 °C 502061 1" 120 °C 502067 1" 120 °C 502400 CST Press fitting ø22,2 customer designed 115 °C 501500 3/4" 120 °C

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Section:

2000 Shower Valves

Description:

A Range of Shower valve(s) with manual temperature control.

Wall mounted concealed Undefinable Air Gap - See IRN's

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2031

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturers:

Hansgrohe SE