Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2208819

Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2208819
Size:: End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).
Marking:: Lawton Tubes Logo, EN1254, size & PN on body.
Installation Requirements:: R001
Expiry date:: 31/08/2027
Model:: 90 Degree Street Elbow (EFELS prefix) EFELS010 10mm – EFELS054 54mm 90 Degree Elbow (EFEL prefix) EFEL008 8mm – EFEL108 108mm Equal Tee (EFTE prefix) EFTE008 8mm – EFTE108 108mm Reducing Tee (EFTE prefix) EFTE0151510 15mmx10mm – EFTE108108108 108mm x108mm Straight Coupling with stop (EFCP prefix) EFCP008 8mm – EFCP108 108mm Straight Slip Coupling (EFESC prefix) EFESC015 15mm - EFESC054 54mm 45 Degree Elbow (EFEL prefix) EFEL00845 8mm – EFEL10845 108mm Reducer Coupling (EFCP prefix) EFCP0108 10mmx 8mm - EFCP108108 108mm x 108mm Reducer fitting (EFRED prefix) EFRED0108 10mmx 8mm – EFRED108108 108mm x 108mm 45 Degree Street Elbow (EFELS prefix) EFELS01545 15mm - EFELS07645 76.1mm 90 Degree Long Radius Elbow (EFELLR prefix) EFELLR015 15mm - EFELLR0108 108mm Cap (EFEC prefix) EFEC008 8mm - EFEC108 108mm Crossover (EFFCO prefix) EFFCO015 15mm - EFFCO022 22mm Part Cross over (EFPCO prefix) EFPCO015 15mm - EFPCO022 22mm Long street elbow (EFELSLT prefix) EFELSLT022 22mm - EFELSLT0108 108mm

Approval Holder:: The Lawton Tube Company Ltd.

Company Name
The Lawton Tube Company Ltd.
Address
Torrington Avenue, Coventry
Postcode
CV4 9AB
Country
United Kingdom
Phone
+44 24 7646 6203 or 024 7646 6203
General Email
mlis@lawtontubes.co.uk

View All Listings by this Company

WRAS Approval Number: #2208820

Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2208820
Size:: End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).
Marking:: HAILIANG, size & PN on body.
Installation Requirements:: R001
Expiry date:: 31/08/2027
Model:: 659811 JET REDUCER 67X28mm, 659812 JET REDUCER 67X35mm, 659813 JET REDUCER 67X42mm, 659814 JET REDUCER 67X54mm, 659815 JET REDUCER 76X35mm, 659816 JET REDUCER 76X42mm, 659817 JET REDUCER 76X54mm, 659818 JET REDUCER 76X67mm, 659819 JET REDUCER 108X42mm, 659820 JET REDUCER 108X54mm, 659821 JET REDUCER 108X67mm, 659822 JET REDUCER 108X76mm 659833 JET STRAIGHT COUPLING 67mm, 659834 JET STRAIGHT COUPLING 76mm, 659835 JET STRAIGHT COUPLING 108mm, 659838 JET REDUCED TEE 67X67X28mm, 659839 JET REDUCED TEE 67X67X35mm, 659840 JET REDUCED TEE 67X67X42mm, 659841 JET REDUCED TEE 67X67X54mm, 659842 JET REDUCED TEE 76X76X28mm, 659843 JET REDUCED TEE 76X76X35mm, 659844 JET REDUCED TEE 76X76X42mm, 659845 JET REDUCED TEE 76X76X54mm, 659846 JET REDUCED TEE 108X108X35mm, 659847 JET REDUCED TEE 108X108X54mm, 659848 JET REDUCED TEE 108X108X76mm, 659853 JET EQUAL TEE 67mm, 659854 JET EQUAL TEE 76mm, 659855 JET EQUAL TEE 108mm 659858 JET STOP END 67mm, 659859 JET STOP END 76mm, 659860 JET STOP END 108mm 659863 JET 90D ELBOW 67mm, 659864 JET 90D ELBOW 76mm, 659865 JET 90D ELBOW 108mm, 659868 JET 45D ELBOW 67mm, 659869 JET 45D ELBOW 76mm, 659870 JET45D ELBOW 108mm, 659927 JET 45D STREET ELBOW 67mm, 659928 JET 45D STREET ELBOW 76mm, 659929 JET 90D LONG RADIUS BEND 67mm, 659930 JET 90D LONG RADIUS BEND 76mm, 659931 JET 90D LONG RADIUS BEND 108mm 659873 * JET BRAZING FEMALE IRON ADAPTOR 76X3 659874 * JET BRAZING FEMALE IRON ADAPTOR 108X4 659875 * JET BRAZING MALE IRON ADAPTOR 67X2.1/2 659876 * JET BRAZING MALE IRON ADAPTOR 76X3 659877 * JET BRAZING MALE IRON ADAPTOR 108X4 659926 * JET BRAZING FEM IRON ADAPTOR 67X21.1/2

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

WRAS Approval Number: #2303317

Dual flush, WC outlet valve. The valve is operated via a sensor for either full or reduced flush and the valve incorporates an internal overflow. Cold water use only.

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 2303317
Size:: 2” BSP (M) outlet
Marking:: Nuca, date of manufacture DD-WW-YY etched on cover
Installation Requirements:: R001 R571 R581
Expiry date:: 31/03/2028
Model:: C241

Approval Holder:: Compas (Xiamen) Plumbing Technology Co, Ltd

Company Name
Compas (Xiamen) Plumbing Technology Co, Ltd
Address
No.46 Xingxi Road Jimei District Xiamen
Country
Fujian

View All Listings by this Company
Manufacturer:: Compas (Xiamen) Plumbing Technology Co, Ltd

Company Name
Compas (Xiamen) Plumbing Technology Co, Ltd
Address
No.46 Xingxi Road Jimei District Xiamen
Country
Fujian

View All Listings by this Company

WRAS Approval Number: #2303360

Dual flush, WC outlet valves. The valves are operated via a push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 2303360
Size:: 2” BSP (M)
Marking:: Wirquin on body
Installation Requirements:: R001 R571 R581
Expiry date:: 31/03/2028
Model:: Wirquin One (model code 10120440)

Approval Holder:: Wirquin Ltd

Company Name
Wirquin Ltd
Address
Unit 3 Alpha Court Thorne Doncaster
Postcode
DN8 5TZ
Country
United Kingdom
Phone
01302 312252
General Email
mick.kirby@wirquin.co.uk

View All Listings by this Company

WRAS Approval Number: #2304014

Dual flush, WC outlet valve, operated via a push button assembly for either full or reduced flush and the valve incorporates an internal overflow. Cold water and open outlet use only.

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 2304014
Size:: 2" BSP (M)
Marking:: Lepu on body.
Installation Requirements:: R001 R571 R581
Expiry date:: 31/01/2028
Model:: LPB-024T

Approval Holder:: LEPU PLASTIC CO.,LTD

Company Name
LEPU PLASTIC CO.,LTD
Address
WEST OF SIXIAN VILLAGE, XIHUAN ROAD, RENQIU CITY, HEBEI PROVINCE, CHINA

View All Listings by this Company