Water Regulations Approval Scheme Ltd

Fittings for use with Tube and Pipe

Section Code 1180 : Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

Back To Directory Sections

WRAS Approval Number: #2207398

Range of stainless steel (SS316L) pressfit fittings with EPDM ‘O’-rings for use with stainless steel pipe (manufactured to EN10312). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2207398
Size:: 15-108mm. ½” BSP (M) or (F) - 4” BSP (M) or (F) (see model - some incorporate a captive nut).
Marking:: Brymec and size on body.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: Coupler OD15 29439 OD22 29440 OD28 29441 OD35 29442 OD42 29443 OD54 29444 OD76.1 29445 OD88.9 29446 OD108 29447 Slip coupling OD15 29448 OD22 29449 OD28 29450 OD35 29451 OD42 29452 OD54 29453 OD76.1 29454 OD88.9 29455 OD108 29456 Fitting Reducer OD22xOD15 29459 OD28xOD15 29460 OD28xOD22 29461 OD35xOD22 29462 OD35xOD28 29463 OD42xOD22 29464 OD42xOD28 29465 OD42xOD35 29466 OD54xOD28 29467 OD54xOD35, 29468 OD54xOD42 29469 OD76.1xOD54 29470 OD88.9xOD54 29471 OD88.9xOD76.1 29472 OD108xOD54 29473 OD108xOD76.1 29474 OD108xOD88.9 29475 F x F 90° Bend OD15 29317 OD22 29318 OD28 29319 OD35 29320 OD42 29321 OD54 29322 OD76.1 29323 OD88.9 23924 OD108 29325 M x F 90° Bend OD15 29308 OD22 29309 OD28 29310 OD35 29311 OD42 29312 OD54 29313 OD76.1 29314 OD88.9 29315 OD108 29316 F X F 45° Bend OD15 29346 OD22 29347 OD28 29348 OD35 29349 OD42 29350 OD54 23951 OD76.1 29353 OD88.9 29354 OD108 29355 M x F 45° Bend OD15 29336 OD22 29337 OD28 29338 OD35 29339 OD42 29340 OD54 29341 OD76.1 29343 OD88.9 29344 OD108 29345 Full Crossover OD15 29356 OD22 29357 OD28 29358 Equal Tee OD15 29376 OD22 29377 OD28 29378 OD35 29379 OD42 29380 OD54 29381 OD76.1 29382 OD88.9 29383 OD108 29384 Reducing Tee OD22xOD15 29385 OD22xOD15 29386 OD28xOD15 29387 OD28xOD22 29389 OD35xOD15 29390 OD35xOD22 29391 OD35xOD28 29392 OD42xOD22 29393 OD42xOD28 29394 OD42xOD35 29395 OD54xOD22 29396 OD54xOD28 29397 OD54xOD35 29398 OD54xOD42 29399 OD76.1xOD22 29400 OD76.1xOD28 29401 OD76.1xOD35 29402 OD76.1xOD42 29403 OD76.1xOD54 29404 OD88.9xOD22 29405 OD88.9xOD28 29406 OD88.9xOD35 29407 OD88.9xOD42 29408 OD88.9xOD54 29409 D88.9xOD76.1 29410 OD108xOD22 29411 OD108xOD28 29412 OD108xOD35 29413 OD108xOD42 29414 OD108xOD54 29415 OD108xOD76.1 29416 OD108xOD88.9 29417 Female Branch Tee OD15xRp 1/2 29418 OD22xRp 1/2 29419 OD22xRp 3/4 29420 OD28xRp 3/4 29421 OD28xRp 1/2 29422 OD28xRp 1 29423 OD35xRp 1/2 29424 OD35xRp 3/4 29425 OD35xRp1 1/4 29426 OD42xRp 1/2 29427 OD42xRp 3/4 29428 OD42xRp1 1/2 29429 OD54xRp 1/2 29430 OD54xRp 3/4 29431 OD54xRp 2 29432 OD76.1xRp 3/4 29433 OD76.1xRp 2 29434 OD88.9xRp 3/4 29435 OD88.9xRp 2 29436 OD108xRp 3/4 29437 OD108xRp 2 29438 Male 90° Elbow OD15xR 1/2 29370 OD22xR 3/4 29371 OD28xR 1 29372 OD35xR 1 1/4 29373 OD42xR 1 1/2 29374 OD54xR 2 29375 Female 90° Elbow OD15xRp 1/2 29362 OD22xRp 3/4 29363 OD28xRp 1 29366 OD35xRp 1 ¼ 29369 Female Backplate Elbow OD15xRp 1/2 29531 OD22xRp 3/4 29532 Male Adaptor OD15xR 1/2 29477 OD15xR 3/4 29478 OD22xR 1/2 29479 OD22xR 3/4 29480 OD22xR 1 29481 OD28xR 3/4 29482 OD28xR 1 29483 OD35xR1 29484 OD35xR 1 1/4 29485 OD42xR 1 1/2 29486 OD54xR 2 29487 OD76.1xR 2 1/2 29488 OD88.9xR 3 29489 OD108xR4 29490 Female Adaptor OD15xRp 1/2 29491 OD15xRp 3/4 29492 OD22xRp 1/2 29493 OD22xRp 3/4 29494 OD22xRp 1 29495 OD28xRp 3/4 29496 OD28xRp 1 29497 OD35xRp 1 1/4 29498 OD42xRp 1 1/2 29499 OD54xRp 2 29500 Plug-In Male Adaptor OD15xR1/2 29259 OD22xR 1/2 29260 OD22xR 3/4 29261 OD28xR 1 29262 Plug-In Female Adaptor OD15xRp 1/2 29245 OD22xRp 1/2 29245 OD22xRp 3/4 29247 OD28xR 3/4 29248 End Cap OD15 29533 OD22 29534 OD28 29535 OD35 29536 OD42 29537 OD54 29538 Male Union Flat Sealing OD15xR 1/2 29523 OD15xR 3/4 29524 OD22xR 3/4 29525 OD28xR 1 29526 OD35xR 1 1/4 29527 OD42xR 1 1/2 29528 OD54xR 2 29529 Female Union Flat Sealing OD15xRp 1/2 29514 OD15xRp 3/4 29515 OD22xRp 3/4 29516 OD22xRp 1 29517 OD28xRp 1 29519 OD35xRp 1 1/4 29520 OD42xRp 1 1/2 29521 OD54xRp 2 29522 Union Flat Sealing OD15 29508 OD22 29509 OD28 29510 OD35 29511 OD42 29512 OD54 29513

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

WRAS Approval Number: #240902084

Range of copper crimped fittings with EPDM ‘O’-rings for use with copper pipe manufactured to EN1057. For above and below ground use. Maximum working pressure 16 Bar. Maximum operating temperature 99°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240902084
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models
Marking:: Brymec and size on body.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: 27800 15mm Copper-Press 90° M/F Bend 27801 22mm Copper-Press 90° M/F Bend 27802 28mm Copper-Press 90° M/F Bend 27803 35mm Copper-Press 90° M/F Bend 27804 42mm Copper-Press 90° M/F Bend 27805 54mm Copper-Press 90° M/F Bend 27806 67mm Copper-Press 90° M/F Bend 27807 76mm Copper-Press 90° M/F Bend 27809 108mm Copper-Press 90° M/F Bend 27810 15mm Copper-Press 90° F/F Bend 27811 22mm Copper-Press 90° F/F Bend 27812 28mm Copper-Press 90° F/F Bend 27813 35mm Copper-Press 90° F/F Bend 27814 42mm Copper-Press 90° F/F Bend 27815 54mm Copper-Press 90° F/F Bend 27816 67mm Copper-Press 90° F/F Bend 27817 76mm Copper-Press 90° F/F Bend 27819 108mm Copper-Press 90° F/F Bend 27820 15mm Copper-Press 45° M/F Bend 27821 22mm Copper-Press 45° M/F Bend 27822 28mm Copper-Press 45° M/F Bend 27823 35mm Copper-Press 45° M/F Bend 27824 42mm Copper-Press 45° M/F Bend 27825 54mm Copper-Press 45° M/F Bend 27826 67mm Copper-Press 45° M/F Bend 27827 76mm Copper-Press 45° M/F Bend 27829 109mm Copper-Press 45° M/F Bend 27830 15mm Copper-Press 45° F/F Bend 27831 22mm Copper-Press 45° F/F Bend 27832 28mm Copper-Press 45° F/F Bend 27833 65mm Copper-Press 45° F/F Bend 27834 42mm Copper-Press 45° F/F Bend 27835 54mm Copper-Press 45° F/F Bend 27836 67mm Copper-Press 45° F/F Bend 27837 76mm Copper-Press 45° F/F Bend 27839 108mm Copper-Press 45° F/F Bend 27840 15mm Copper-Press Full Crossover 27841 22mm Copper-Press Full Crossover 27845 15mm Copper-Press Partial Crossover 27846 22mm Copper-Press Partial Crossover 27850 15mm Copper-Press Equal Tee 27851 22mm Copper-Press Equal Tee 27852 28mm Copper-Press Equal Tee 27853 35mm Copper-Press Equal Tee 27854 42mm Copper-Press Equal Tee 27855 54mm Copper-Press Equal Tee 27856 67mm Copper-Press Equal Tee 27857 76mm Copper-Press Equal Tee 27859 108mm Copper-Press Equal Tee 27860 15 x 22 x 15mm Copper-Press Reducing Tee ExBxE 27861 22 x 15 x 15mm Copper-Press Reducing Tee ExBxE 27862 22 x 15 x 22 mm Copper-Press Reducing Tee ExBxE 27863 22 x 22 x 15mm Copper-Press Reducing Tee ExBxE 27865 28 x 15 x 22mm Copper-Press Reducing Tee ExBxE 27866 28 x 15 x 28mm Copper-Press Reducing Tee ExBxE 27867 28 x 22 x 22mm Copper-Press Reducing Tee ExBxE 27868 28 x 22 x 28mm Copper-Press Reducing Tee ExBxE 27869 28 x 28 x 15mm Copper-Press Reducing Tee ExBxE 27870 28 x 28 x 22mm Copper-Press Reducing Tee ExBxE 27872 35 x 15 x 35mm Copper-Press Reducing Tee ExBxE 27874 35 x 22 x 28mm Copper-Press Reducing Tee ExBxE 27875 35 x 22 x 35mm Copper-Press Reducing Tee ExBxE 27876 35 x 28 x 28mm Copper-Press Reducing Tee ExBxE 27877 35 x 28 x 35mm Copper-Press Reducing Tee ExBxE 27880 42 x 15 x 42mm Copper-Press Reducing Tee ExBxE 27881 42 x 22 x 42mm Copper-Press Reducing Tee ExBxE 27882 42 x 28 x 42mm Copper-Press Reducing Tee ExBxE 27884 42 x 35 x 42mm Copper-Press Reducing Tee ExBxE 27885 54 x 22 x 54mm Copper-Press Reducing Tee ExBxE 27886 54 x 28 x 54mm Copper-Press Reducing Tee ExBxE 27887 54 x 35 x 54mm Copper-Press Reducing Tee ExBxE 27888 54 x 42 x 54mm Copper-Press Reducing Tee ExBxE 27889 67 x 54 x 67mm Copper-Press Reducing Tee ExBxE 27890 76 x 54 x 76mm Copper-Press Reducing Tee ExBxE 27893 108 x 54 x 108mm Copper-Press Reducing Tee ExBxE 27896 42 x 42 x 35mm Copper-Press Reducing Tee ExBxE 27900 22 x 15mm Copper-Press Reducing Coupling 27901 28 x 15mm Copper-Press Reducing Coupling 27902 28 x 22 mm Copper-Press Reducing Coupling 27903 35 x 22mm Copper-Press Reducing Coupling 27904 35 x 28mm Copper-Press Reducing Coupling 27905 42 x 22mm Copper-Press Reducing Coupling 27906 42 x 28mm Copper-Press Reducing Coupling 27907 42 x 35mm Copper-Press Reducing Coupling 27908 54 x 28mm Copper-Press Reducing Coupling 27909 54 x 35mm Copper-Press Reducing Coupling 27910 54 x 42mm Copper-Press Reducing Coupling 27915 22 x 15mm Copper-Press Reducer 27916 28 x 15mm Copper-Press Reducer 27917 28 x 22mm Copper-Press Reducer 27918 35 x 22mm Copper-Press Reducer 27919 35 x 28mm Copper-Press Reducer 27920 42 x 22mm Copper-Press Reducer 27921 42 x 28mm Copper-Press Reducer 27922 42 x 35mm Copper-Press Reducer 27923 54 x 35mm Copper-Press Reducer 27924 54 x 42mm Copper-Press Reducer 27925 67 x 54mm Copper-Press Reducer 28234 76 x 35mm Copper-Press Reducer 27926 76 x 54mm Copper-Press Reducer 27929 108 x54mm Copper-Press Reducer 27930 108 x76mm Copper-Press Reducer 27932 54 x 28mm Copper-Press Reducer 27940 15mm Copper-Press Coupling 27941 22mm Copper-Press Coupling 27942 28mm Copper-Press Coupling 27943 35mm Copper-Press Coupling 27944 42mm Copper-Press Coupling 27945 54mm Copper-Press Coupling 27946 67mm Copper-Press Coupling 27947 76mm Copper-Press Coupling 27949 108mm Copper-Press Coupling 27950 15mm Copper-Press Slip Coupling 27951 22mm Copper-Press Slip Coupling 27952 28mm Copper-Press Slip Coupling 27953 35mm Copper-Press Slip Coupling 27954 42mm Copper-Press Slip Coupling 27955 54mm Copper-Press Slip Coupling 27956 67mm Copper-Press Slip Coupling 27957 76mm Copper-Press Slip Coupling 27960 15mm Copper-Press End Cap 27961 22mm Copper-Press End Cap 27962 28mm Copper-Press End Cap 27963 35mm Copper-Press End Cap 27964 42mm Copper-Press End Cap 27965 54mm Copper-Press End Cap 27966 67mm Copper-Press End Cap 27967 76mm Copper-Press End Cap 28071 15mm x1/2" Copper-Press Female Iron 90° Elbow 28074 22mm x3/4" Copper-Press Female Iron 90° Elbow 28081 15mm x1/2" Copper-Press Male Iron 90° Elbow 28101 15mm x1/2" x 15mm Copper-Press Female Branch Reducing Tee 28102 22mm x1/2" x 22mm Copper-Press Female Branch Reducing Tee 28104 28mm x1/2" x 28mm Copper-Press Female Branch Reducing Tee 28106 35mm x1/2" x 35mm Copper-Press Female Branch Reducing Tee 28108 42mm x1/2" x 42mm Copper-Press Female Branch Reducing Tee 28110 54mm x1/2" x 54mm Copper-Press Female Branch Reducing Tee 28115 15mm x 3/8" Copper-Press Male Iron Adaptor 28116 15mm x 1/2" Copper-Press Male Iron Adaptor 28117 15mm x 3/4" Copper-Press Male Iron Adaptor 28118 22mm x 1/2" Copper-Press Male Iron Adaptor 28119 22mm x 3/4" Copper-Press Male Iron Adaptor 28120 22mm x 1" Copper-Press Male Iron Adaptor 28121 28mm x 3/4" Copper-Press Male Iron Adaptor 28122 28mm x 1" Copper-Press Male Iron Adaptor 28125 35mm x 1 1/4" Copper-Press Male Iron Adaptor 28128 42mm x 1 1/2" Copper-Press Male Iron Adaptor 28130 54mm x 2" Copper-Press Male Iron Adaptor 28131 67mm x 2 1/2" Copper-Press Male Iron Adaptor 28133 76mm x 3" Copper-Press Male Iron Adaptor 28134 108mm x 4" Copper-Press Male Iron Adaptor 28141 15mm x 1/2" Copper-Press Plug-In Female Adapter 28142 22mm x 1/2" Copper-Press Plug-In Female Adapter 28143 22mm x 3/4" Copper-Press Plug-In Female Adapter 28145 28mm x 1" Copper-Press Plug-In Female Adapter 28148 54mm x 2" Copper-Press Plug-In Female Adapter 28149 35mm x 1" Copper-Press Plug-In Female Adapter 28151 15mm x 1/2" Copper-Press Female Iron Adaptor 28153 22mm x 1/2" Copper-Press Female Iron Adaptor 28154 22mm x 3/4" Copper-Press Female Iron Adaptor 28157 28mm x 1" Copper-Press Female Iron Adaptor 28160 35mm x 1 1/4" Copper-Press Female Iron Adaptor 28163 42mm x 1 1/2" Copper-Press Female Iron Adaptor 28165 54mm x 2" Copper-Press Female Iron Adaptor 28166 67mm x 2 1/2" Copper-Press Female Iron Adaptor 28169 76mm x 3" Copper-Press Female Iron Adaptor 28171 15mm x 1/2" Copper-Press Plug-In Male Adapter 28173 22mm x 3/4" Copper-Press Plug-In Male Adapter 28231 67 x 28mm Copper-Press Reducer 28232 67 x 35mm Copper-Press Reducer 28234 76 x 35mm Copper-Press Reducer 28233 67 x 42mm Copper-Press Reducer 28236 76 x 67mm Copper-Press Reducer 28237 108 x42mm Copper-Press Reducer 28238 108 x42mm Copper-Press Reducer 28255 67 x 28 x 67mm Copper-Press Reducing Tee ExBxE 28260 76 x 35 x 76mm Copper-Press Reducing Tee ExBxE 27897 54 x 22 x 54mm Extended Spigot Manifold Tee 27898 54 x 28 x 54mm Extended Spigot Manifold Tee 27911 67mm x 1/2" 2 Port Copper‐Press Multiport Coupler 27912 76mm x 1/2" 2 Port Copper‐Press Multiport Coupler 27913 108mm x 3/4" 4 Port Copper‐Press Multiport Coupler 28190 15mm x 1/2" Copper Press Female Union 28192 22mm x 3/4" Copper Press Female Union 28195 28mm x 1" Copper Press Female Union 28196 35mm x 1 1/4" Copper Press Female Union 28197 42mm x 1 1/2" Copper Press Female Union 28198 54mm x 2" Copper Press Female Union 28200 15mm x 1/2" Copper Press Male Union 28203 22mm x 3/4" Copper Press Male Union 28206 28mm x 1" Copper Press Male Union 28207 35mm x 1 ¼ Copper Press Male Union 28208 42mm x 1 1/2" Copper Press Male Union 28209 54mm x 2" Copper Press Male Union 28225 15mm x1/2"Copper Press Female Backplate Elbow 28241 42mm Copper Press Flange (1 1/2" / DN40) 28242 54mm Copper Press Flange (2" / DN50) 28243 67mm Copper Press Flange (2 1/2" / DN65) 28244 76mm Copper Press Flange (3”/DN 80) 28246 108mm Copper Press Flange (4" / DN100)

Approval Holder:: Brymec Ltd

Company Name
Brymec Ltd
Address
Redlands , Coulsdon, Surrey
Postcode
CR5 2HT
Country
United Kingdom
General Email
Jeremy.douglas@brymec.com

View All Listings by this Company

WRAS Approval Number: #250302022

Range of plastic, push-fit fittings (wall plate elbow, equal elbow, end stop, pipe insert, equal straight and equal tee) for use with MDPE pipe (manufactured to BS EN 12201), for above and below ground use. Copper adaptors are for use with PB pipe (manufactured to BS7291-2), PEX pipe (manufactured to BS7291-3) or Copper pipes (manufactured to BS EN 1057) and are for above ground use only. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250302022
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to models
Marking:: TLC logo and size on body. Size and PN on plastic nut.
Installation Requirements:: R001
Expiry date:: 31/03/2030
Model:: SMDCA6726M - 20mm X 15mm. SMDCA6784M - 25mm X 22mm. SMDCA6786M - 25mm X 15mm. SMDE6722M, SMDST672M, SMTS20M, SMDU6722M & SMDT67222M - 20mm. SMDE6788M, SMDST678M, SMDU6788M, SMDT67888M & SMTS25M - 25mm. SMDWP6784M - 25mm x ½” BSP (M). SMDWP6724M - 20mm x ½” BSP (F) (Wall Plate Elbow).

Approval Holder:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200
General Email
nchoi@twistloc.com

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200
General Email
nchoi@twistloc.com

View All Listings by this Company

WRAS Approval Number: #250402030

‘Universal Transition Coupling (UTC)’ range of plastic compression fittings for use with the following pipe types and sizes: Stainless steel (manufactured to ASTM A554/ BS EN 10312): ¾”, 1” & 1¼”. Galvanised (EN 10255): ¾”, 1”, 1¼”, 1½” & 2”. Copper (BS EN 1057): 15mm, 22mm & 28mm. PVC (BS EN 1452): 20mm & 2”. ABS (BS 5391-1): 20mm, 25mm & 32mm. PE80 & PE100 pipe (to BS EN 12201): 20mm, 25mm, 32mm, 50mm & 63mm. For use above and below ground. Maximum working pressure 12.5 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250402030
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see model
Marking:: Philmac, Universal Transition Fitting, size & date of manufacture (M/YY) on body.
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: 87113300 UTC Joiner 15-21mm x 15-21mm 87114300 UTC Joiner 21-27mm x 15-21mm 87114400 UTC Joiner 21-27mm x 21-27mm 87115300 UTC Joiner 27-34mm x 15-21mm 87115400 UTC Joiner 27-34mm x 21-27mm 87115500 UTC Joiner 27-34mm x 27-34mm 87116500 UTC Joiner 39-43mm x 27-34mm 87116600 UTC Joiner 39-43mm x 39-43mm 87117700 UTC Joiner 34-39mm x 34-39mm 87118800 UTC Joiner 47-49mm x 47-49mm 87119900 UTC Joiner 59-61mm x 59-61mm 87123100 UTC End Connector MI BSP 15-21mm x ½" 87123200 UTC End Connector MI BSP 15-21mm x ¾" 87123300 UTC End Connector MI BSP 15-21mm x 1" 87124200 UTC End Connector MI BSP 21-27mm x ¾" 87124300 UTC End Connector MI BSP 21-27mm x 1" 87124400 UTC End Connector MI BSP 21-27mm x 1¼" 87125200 UTC End Connector MI BSP 27-34mm x ¾" 87125300 UTC End Connector MI BSP 27-34mm x 1" 87125400 UTC End Connector MI BSP 27-34mm x 1¼" 87125500 UTC End Connector MI BSP 27-34mm x 1½" 87133300 UTC Tee 15-21mm 88103200 UTC x 3G Metric/Imperial Joiner 15-21 x 20/½" 88103300 UTC x 3G Metric/Imperial Joiner 15-21 x 25/¾" 88104200 UTC x 3G Metric/Imperial Joiner 21-27 x 20/½" 88104300 UTC x 3G Metric/Imperial Joiner 21-27 x 25/¾" 88105200 UTC x 3G Metric/Imperial Joiner 27-34 x 20/½" 88105300 UTC x 3G Metric/Imperial Joiner 27-34 x 25/¾" 88105400 UTC x 3G Metric/Imperial Joiner 27-34 x 32/1" 88106400 UTC x 3G Metric/Imperial Joiner 39-43 x 32/1" 88107400 UTC x 3G Metric/Imperial Joiner 34-39 x 32/1" 88108600 UTC x 3G Metric/Imperial Joiner 47-49 x 50/1½" 88108700 UTC x 3G Metric/Imperial Joiner 47-49 x 63/2" 88109700 UTC x 3G Metric/Imperial Joiner 59-61 x 63/2" 88153300 UTC x 3G Metric/Imperial Elbow 15-21 x 25/¾" 88154300 UTC x 3G Metric/Imperial Elbow 21-27 x 25/¾" 88154400 UTC x 3G Metric/Imperial Elbow 21-27 x 32/1" 88155300 UTC x 3G Metric/Imperial Elbow 27-34 x 25/¾" 88165300 UTC x 3G Metric/Imperial Elbow 27-34 x 32/1"

Manufacturer:: Philmac Pty Ltd.

Company Name
Philmac Pty Ltd.
Address
47-59 Deeds Road, North Plympton, SA 5037
Country
Australia

View All Listings by this Company

WRAS Approval Number: #250804703

Range of brass press fittings for use with copper pipe (manufactured to EN1057:2006 and +A1:2010 Seamless round copper tube, R250 half hard). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250804703
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Flowflex logo and size on body.
Installation Requirements:: R001
Expiry date:: 31/08/2030
Model:: 6090GM Female Elbow: 6090GM.15x½B. 6090GM.22x¾B. 6090GM.28x1B. 6092GM Male Elbow: 6092GM.15x½B. 6092GM.22x¾B. 6092GM.28x1B. 6130GM Female Tee: 6130GM.151215B. 6130GM.221222B. 6130GM.223422B. 6130GM.281228B. 6130GM.283428B. 6130GM.351235B. 6130GM.421242B. 6130GM.541254B 6240GM Swivel Connector: 6240GM.15x¾B. 6240GM.22x1B. 6240GM.28x l¼B. 6243GM Male Adaptor: 6243GM.15x½B. 6243GM.15x¾B. 6243GM.22x½B. 6243GM.22x1B. 6243GM.22x¾B 6243GM.28x1B 6243GM.28x¾B 6243GM.35x 1¼B. 6243GM.35x1B 6243GM.42x 1½B. 6243GM.54x2B. 6243GM.67x 2½B. 6243GM.76x3B. 6270GM Female Adaptor: 6270GM.15x½B. 6270GM.15x¾B. 6270GM.22x½B. 6270GM.22x1B. 6270GM.22x¾B. 6270GM.28x1B. 6270GM.28x¾B. 6270GM.35x 1¼B. 6270GM.35x1B. 6270GM.42x 1½B. 6270GM.54x2B 6341GM Male Union: 6341GM.15x½B. 6341GM.22x¾B. 6341GM.28x1B. 6472GM Wallplate Elbow: 6472GM.15x½B.

Approval Holder:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #250402008

Range of Copper and Brass push fit fittings. Brass fittings are for use with PB pipe (manufactured to BS7291-2) & Copper pipe (manufactured to BS EN 1057) only. Copper fittings are for use with PB pipe (manufactured to BS7291-2), PE-X pipe (manufactured to BS7291-3) & Copper pipe (manufactured to BS EN 1057). Maximum working pressures and operating temperatures when used with: PB & PEX pipe – 3.0 bar and 92°C, 20.0 bar cold water. Copper pipe – 20.0 bar and 100°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250402008
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 10mm – 22mm.
Marking:: TLC Logo and size on body
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: Copper Model Code (Size): SCE6711M (10mm Pushfit) SCE6744M (Push-fit 22mm) SCE6766M (15mm Pushfit) SCE6766MC (15mm Pushfit) SCAE6766M (15mm Pushfit) SCASE6766M (15mm Pushfit) SCRD6716M (10mm x 15mm Pushfit Stem) SCRD6764M (15mm x 22mm Pushfit Stem) SCSE6766M (15mm Pushfit) SCU6711M (10mm Pushfit) SCU6744M (22mm Push-fit) SCU6766M (15mm Pushfit) SCU6766MC (15mm Pushfit) SCT67444M (22mm Push-fit) SCT67446M (22mm x 22mm x 15mm Push-fit) SCT67666M (15mm Pushfit) SCST676M (15mm Push-fit) SCST674M (22mm Push-fit) Brass Model Code (Size): SBDE6766M (15mm Pushfit) SBDMC6764M (15mm Pushfit x 1/2” BSPT (M)) SBDME6764M (15mm Pushfit x 1/2” BSPT (M)) SBDU6766M (15mm Pushfit) SBDT67666M (15mm Pushfit)

Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #250302053

Flomasta Range of plastic, push-fit fittings (wall plate elbow, equal elbow, end stop, pipe insert, equal straight and equal tee) for use with MDPE pipe (manufactured to BS EN 12201), for above and below ground use. Copper adaptors are for use with PB pipe (manufactured to BS7291-2), PEX pipe (manufactured to BS7291-3) or Copper pipes (manufactured to BS EN 1057) and are for above ground use only. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250302053
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to models
Marking:: TLC logo and size on body. Size and PN on plastic nut.
Installation Requirements:: R001
Expiry date:: 31/03/2030
Model:: Flomasta Range of plastic push-fit fittings SMDCA6726M - 20mm X 15mm. SMDCA6784M - 25mm X 22mm. SMDCA6786M - 25mm X 15mm. SMDE6722M, SMDST672M, SMTS20M, SMDU6722M & SMDT67222M - 20mm. SMDE6788M, SMDST678M, SMDU6788M, SMDT67888M & SMTS25M - 25mm. SMDWP6784M - 25mm x ½” BSP (M). SMDWP6724M - 20mm x ½” BSP (F) (Wall Plate Elbow).

Approval Holder:: Kingfisher Plc.

Company Name
Kingfisher Plc.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #250402063

Flomasta Range of Copper and Brass push fit fittings. Brass fittings are for use with PB pipe (manufactured to BS7291-2) & Copper pipe (manufactured to BS EN 1057) only. Copper fittings are for use with PB pipe (manufactured to BS7291-2), PE-X pipe (manufactured to BS7291-3) & Copper pipe (manufactured to BS EN 1057). Maximum working pressures and operating temperatures when used with: PB & PEX pipe – 3.0 bar and 92°C, 20.0 bar cold water. Copper pipe – 20.0 bar and 100°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250402063
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 10mm – 22mm.
Marking:: TLC Logo and size on body
Installation Requirements:: R001
Expiry date:: 30/04/2030
Model:: Copper Model Code (Size): SCE6711M (10mm Pushfit) SCE6744M (Push-fit 22mm) SCE6766M (15mm Pushfit) SCE6766MC (15mm Pushfit) SCAE6766M (15mm Pushfit) SCASE6766M (15mm Pushfit) SCRD6716M (10mm x 15mm Pushfit Stem) SCRD6764M (15mm x 22mm Pushfit Stem) SCSE6766M (15mm Pushfit) SCU6711M (10mm Pushfit) SCU6744M (22mm Push-fit) SCU6766M (15mm Pushfit) SCU6766MC (15mm Pushfit) SCT67444M (22mm Push-fit) SCT67446M (22mm x 22mm x 15mm Push-fit) SCT67666M (15mm Pushfit) SCST676M (15mm Push-fit) SCST674M (22mm Push-fit) Brass Model Code (Size): SBDE6766M (15mm Pushfit) SBDMC6764M (15mm Pushfit x 1/2” BSPT (M)) SBDME6764M (15mm Pushfit x 1/2” BSPT (M)) SBDU6766M (15mm Pushfit) SBDT67666M (15mm Pushfit)

Approval Holder:: Kingfisher Plc.

Company Name
Kingfisher Plc.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX
Phone
+44 (0) 20 7372 8008

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #250512018

Range of DZR brass push fit fittings for use with copper pipe (EN1057). Maximum working pressure 10.0 Bar. Maximum operating temperature 65 °C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250512018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: “IDC” logo & size on body.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: 2PAA014 - Push-fit straight fitting 1/2”(14.7mm), 2PAA021 - Push-fit straight fitting 1/2”(14.7mm), 2PAB014 - Push-fit Elbow fitting 1/2”(14.7mm), 2PAB021 - Push-fit Elbow fitting 3/4”(21mm), 2PAC014 - Push-fit equal Tee fitting 1/2”(14.7mm), 2PAC021 - Push-fit equal Tee fitting 3/4”(21mm), 2PAD014 - Push-fit Stop End 1/2”(14.7mm), 2PAD021 - Push-fit Stop End 3/4”(21mm), 2PAE002 - Push-fit x Male straight adapter 1/2”(14.7mm) x 3/4”M, 2PAA121 - Push-fit Reduce straight adapter 3/4”(21mm) x 1/2”(14.7mm), 2PPA142 - Pushfit Straight Pushfit x Pipe 1/2”(14.7mm) x 3/4”(21mm), 2PAC221 - Push-fit Reduce Tee fitting 3/4”(21mm) x 3/4”(21mm) x 1/2”(14.7mm), 2PAC211 - Push-fit Reduce Tee fitting 3/4”(21mm) x 1/2”(14.7mm) x 1/2”(14.7mm), 2PAC212 - Push-fit Reduce Tee fitting 3/4”(21mm) x 1/2”(14.7mm) x 3/4”(21mm).

Approval Holder:: IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company

WRAS Approval Number: #2106063

Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2106063
Size:: 15mm to 108mm
Marking:: RP - Rapid Press, WRAS Approved Product logo, Size & batch number.
Installation Requirements:: R001
Expiry date:: 30/06/2026
Model:: CCP015 - CCP108 15 - 108mm. FRCP Reducer x press: 22mmx15mm - FRCP022015 28mmx15mm - FRCP028015 28mmx22mm - FRCP022022 35mmx22mm - FRCP035022 35mmx28mm - FRCP035028 42mmx22mm - FRCP042022 42mmx28mm - FRCP042028 42mmx35mm - FRCP042035 54mmx35mm - FRCP054035 54mmx42mm - FRCP054042 67mmx54mm - FRCP067054 76mmx67mm - FRCP076067 108mmx76mm - FRCP108076 SECP015 - SECP108 Bend 90° x press: 15 - 108mm. ECP015 - EPC108 Bend 90° press x press: 15 - 108mm. ETCP015 - ETCP108 Equal Tee 3 x press: 15 - 108mm. 6040 & 6040CP Bend 45° x press: 12 - 108mm. OECP015 - OECP108 Bend 45° press x press: 15 - 108mm. RTCP015015022 -RTCP108108076 Reducing Tee 3 x press: 15mmx22mmx15mm 22mmx15mmx22mm 28mmx15mmx28mm 28mmx22mmx28mm 35mmx15mmx35mm 35mmx22mmx35mm 35mmx28mmx35mm 42mmx22mmx42mm 42mmx28mmx42mm 42mmx35mmx42mm 54mmx28mmx54mm 54mmx35mmx54mm 54mmx42mmx54mm 67mmx54mmx67mm 76mmx67mmx76mm 108mmx76mmx108mm 6085 & 6085CP Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 & 6086CP Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 & 6510CP Flange PN16: 76.1mm. Chrome plated models added 02/06/2023

Approval Holder:: Rapid Press Fittings Ltd

Company Name
Rapid Press Fittings Ltd
Address
2 Penrod Way Heysham Lancashire
Postcode
LA3 2UZ
Phone
(01524) 965100
General Email
jacobrelph@phd.ltd

View All Listings by this Company

WRAS Approval Number: #250602010

Twistloc’ range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe (EN1057). Maximum working pressure/temperature: 12.5 Bar @ 20°C. As of October 2025: Maximum working pressure/temperature 3 Bar @ 92°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250602010
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 10mm, 15mm, 22mm, 28mm
Marking:: TLC (TwistLoc logo) and size on body
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: ‘Twistloc’ range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #250615003

‘HDE-210xxx-xx’ range of brass press-fit fittings incorporating EPDM ‘O’-rings for use with copper pipes (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250615003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD. logo and size on body.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Plug: HDE-210001-01: 15mm, HDE-210001-02: 22mm, HDE-210001-03: 28mm, HDE-210001-05: 35mm, HDE-210001-06: 42mm, HDE-210001-07: 54mm. Straight Connector: HDE-210002-01: 15mm*15mm, HDE-210002-02: 22mm*22mm, HDE-210002-03: 28mm*28mm, HDE-210002-05: 35mm*35mm, HDE-210002-06: 42mm*42mm, HDE-210002-07: 54mm*54mm. Male Connector: HDE-210003-01 : 15mm*½”, HDE-210003-02 : 22mm*¾”, HDE-210003-03 : 28mm*1”, HDE-210003-05 : 35mm*1¼”, HDE-210003-06 : 42mm*1½”, HDE-210003-07 : 54mm*2”. Female Connector: HDE-210005-01 : 15mm*½”, HDE-210005-02 : 22mm*¾”, HDE-210005-03 : 28mm*1”, HDE-210005-05 : 35mm*1¼”, HDE-210005-06 : 42mm*1½”, HDE-210005-07 : 54mm*2”. Elbow Connector: HDE-210006-01: 15mm*15mm, HDE-210006-02: 22mm*22mm, HDE-210006-03: 28mm*28mm, HDE-210006-05: 35mm*35mm, HDE-210006-06: 42mm*42mm, HDE-210006-07: 54mm*54mm. Male Elbow Connector: HDE-210007-01: 15mm*½”, HDE-210007-02: 22mm*¾”, HDE-210007-03: 28mm*1”, HDE-210007-05: 35mm*1¼”, HDE-210007-06: 42mm*1½”, HDE-210007-07: 54mm*2”. Female Elbow Connector: HDE-210008-01: 15mm*½”, HDE-210008-02: 22mm*¾”, HDE-210008-03: 28mm*1”, HDE-210008-05: 35mm*1¼”, HDE-210008-06: 42mm*1½”, HDE-210008-07: 54mm*2”. Tee Connector: HDE-210009-01: 15mm*15mm*15mm, HDE-210009-02: 22mm*22mm*22mm, HDE-210009-03: 28mm*28mm*28mm, HDE-210009-05: 35mm*35mm*35mm, HDE-210009-06: 42mm*42mm*42mm, HDE-210009-07: 54mm*54mm*54mm. Male Tee Connector: HDE-210010-01: 15mm*15mm*½”, HDE-210010-02: 22mm*22mm*¾”, HDE-210010-03: 28mm*28mm*1”, HDE-210010-05: 35mm*35mm*1¼”, HDE-210010-06: 42mm*42mm*1½”, HDE-210010-07: 54mm*54mm*2”. Female Tee Connector: HDE-210011-01 : 15mm*15mm*½”, HDE-210011-02 : 22mm*22mm*¾”, HDE-210011-03 : 28mm*28mm*1”, HDE-210011-05 : 35mm*35mm*1¼”, HDE-210011-06 : 42mm*42mm*1½”, HDE-210011-07 : 54mm*54mm*2”. Wall-Plate Elbow Connector: HDE-210012-01: 15mm*15mm, HDE-210012-02: 22mm*22mm, HDE-210012-03: 28mm*28mm, HDE-210012-05: 35mm*35mm, HDE-210012-06: 42mm*42mm, HDE-210012-07: 54mm*54mm. Wall-Plate Male Elbow Connector: HDE-210013-01: 15mm*½”, HDE-210013-02: 22mm*¾”, HDE-210013-03: 28mm*1”, HDE-210013-05: 35mm*1¼”, HDE-210013-06: 42mm*1½”, HDE-210013-07: 54mm*2”. Wall-Plate Female Elbow Connector: HDE-210015-01: 15mm*½”, HDE-210015-02: 22mm*¾”, HDE-210015-03: 28mm*1”, HDE-210015-05: 35mm*1¼”, HDE-210015-06: 42mm*1½”, HDE-210015-07: 54mm*2”. All threaded connection are BSP.

Approval Holder:: TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name
TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.
Address
No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610
Country
China

View All Listings by this Company
Manufacturer:: TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.

Company Name
TAIZHOU DEOUNI FLUID CONTROL TECH. CO., LTD.
Address
No.3, Jinhai Road, Bin'gang Industry Zone, Ganjiang Town, Yuhuan, Zhejiang Province, 317610
Country
China

View All Listings by this Company

WRAS Approval Number: #250804708

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250804708
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Flowflex logo and size on body.
Installation Requirements:: R001
Expiry date:: 31/08/2030
Model:: Male Adaptor: 572210 - 15X1/2B 572211 - 22X3/4B 572212 - 28X1B 572213 - 35X1.1/4B 572214 - 42X1.1/2B 572215 - 54X2B Female Adaptor: 572216 - 15X1/2B 572217 - 22X3/4B 572218 - 28X1B 572219 - 35X1.1/4B 572220 - 42X1.1/2B 572221 - 54X2B Wallplate Elbow: 572222 - 15x½B.

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company
Manufacturer:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company
Manufacturer:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #2204110

‘AF’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2204110
Size:: see model
Marking:: Plumb Bliss logo (PB), Size & month/year of manufacture on fitting body
Installation Requirements:: R001
Expiry date:: 30/04/2027
Model:: 10.1272 Plumb Bliss Compression Coupler Male 15mm x 1/2" 10.1273 Plumb Bliss Compression Coupler Male 15mm x 3/4" 10.1274 Plumb Bliss Compression Coupler Male 22mm x 1/2" 10.1275 Plumb Bliss Compression Coupler Male 22mm x 3/4" 10.1276 Plumb Bliss Compression Coupler Female 15mm x 1/2" 10.1277 Plumb Bliss Compression Coupler Male 15mm x 3/4" 10.1278 Plumb Bliss Compression Coupler Male 22mm x 1/2" 10.1279 Plumb Bliss Compression Coupler Male 22mm x 3/4" 10.1280 Plumb Bliss Brass Compression Tee 15mm x 15mm x 1/2" 10.1281 Plumb Bliss Wall Plate Compression Elbow 15mm x 1/2"

Approval Holder:: Bliss UK Group Ltd

Company Name
Bliss UK Group Ltd
Address
Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire
Postcode
MK43 8TS
Country
United Kingdom
Phone
01234 860230
General Email
accounts@blissukgroup.co.uk

View All Listings by this Company

WRAS Approval Number: #250702013

Range of Victaulic rigid couplings (905, H10, H11, H20, H50) for use with plain end HDPE pipe (EN 12201-2), and for product 907, for use with EN 12201-2 HDPE and EN 10217-1 steel pipe. For above and below ground use. Maximum working pressure: SDR7.4 25bar, SDR11 16bar or SDR17 10bar. Maximum operating temperature: Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250702013
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: For H10, H11, H20 and H50, sizes 75, 140, 225mm not available in SDR7.4.
Size:: See Models below.
Marking:: Victaulic and size on fitting.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: 905 Style 905 Coupling 63mm – 315mm Rigid Coupling, 907 Style 907 Transition Coupling 63mm x DN50 - 280mm x DN250 Rigid Coupling H10, HDPE 90° Elbow 63mm – 225mm Rigid Coupling, H11, HDPE 45° Elbow 63mm – 225mm Rigid Coupling, H20, HDPE Straight Tee 63mm – 225mm Rigid Coupling, H50, HDPE Concentric Reducer 90mm x 63mm – 160mm x 110 mm Rigid Coupling.

Approval Holder:: Victaulic Europe BVBA

Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company

WRAS Approval Number: #260202003

Range of polypropylene push-fit fittings and inserts for use with PE80 MDPE pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 260202003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: 32mm models only for use with PE100 MDPE pipe
Size:: See models below
Marking:: PN, JG logo and size on body
Installation Requirements:: R001
Expiry date:: 28/02/2031
Model:: UG101B - 20mm x 1/2" BSP MALE ADAPTOR UG102B - 25mm x 3/4" BSP MALE ADAPTOR UG103B - 32mm x 1" BSPT MALE ADAPTOR UG104B - 32mm x 1.1/2" BSPT MALE ADAPTOR UG201B - 20mm EQUAL TEE UG202B - 25mm EQUAL TEE UG203B - 32mm EQUAL TEE UG232AB - 32mm x 25mm REDUCING TEE UG222025B - 20mm x 25mm STEM ELBOW UG222525B - 25mm x 25mm STEM ELBOW UG223232B - 32mm x 32mm STEM ELBOW UG301B - 20mm EQUAL ELBOW UG302B - 25mm EQUAL ELBOW UG303B - 32mm EQUAL ELBOW UG401B - 20mm EQUAL STRAIGHT CONNECTOR UG402B - 25mm EQUAL STRAIGHT CONNECTOR UG403B - 32mm EQUAL STRAIGHT CONNECTOR UG4501B - 20 x 1/2" FEMALE ADAPTOR UG4502B - 25 X 3/4" FEMALE ADAPTOR UG4620B - 20mm STOP END UG4625B - 25mm STOP END UG501B - 25mm x 20mm REDUCING STRAIGHT CONNECTOR UG502B - 32mm x 25mm REDUCING STRAIGHT CONNECTOR UG801E - 20mm PLUG UG802E - 25mm PLUG UG803E - 32mm PLUG UGPWB2014 - 20mm x 1/2" BACK PLATE ELBOW UGPWB2514 - 25mm x 1/2" BACK PLATE ELBOW UGPWB2516 - 25mm x 3/4" BACK PLATE ELBOW UTS147-DB - 20mm PIPE INSERT UTS197-DB - 25mm PIPE INSERT UTS251-DB - 32mm PIPE INSERT

Manufacturer:: Reliance Worldwide Corporation (UK) Ltd

Company Name
Reliance Worldwide Corporation (UK) Ltd
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060

View All Listings by this Company

WRAS Approval Number: #250702042

Range of metric and imperial PVC-U Solvent cement or Threaded fittings for use with PVC-U pressure pipe Class E manufacture to BS EN 1452 Maximum working pressure; 16 Bar Maximum operating temperature; Cold water only

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250702042
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models 63mm, 75mm, 90mm & 110mm were added in December 2025.
Marking:: Omega, Size, pressure and material on body
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: Model: PVC Fitting Plain Socket Elbow 90° PFPGOI0200 20 mm SC PFPGOI0250 25 mm SC PFPGOI0320 32 mm SC PFPGOI0400 40 mm SC PFPGOI0500 50 mm SC PFPGOI0630 63 mm SC PFPGOI0750 75 mm SC PFPGOI0900 90 mm SC PFPGOI1100 110 mm SC PVC Fitting Plain TEE 90° PFPTII0200 20 mm SC PFPTII0250 25 mm SC PFPTII0320 32 mm SC PFPTII0400 40 mm SC PFPTII0500 50 mm SC PFPTII0630 63 mm SC PFPTII0750 75 mm SC PFPTII0900 90 mm SC PFPTII1100 110 mm SC PVC Fitting Plain Elbow 45° PFPGYI0200 20 mm SC PFPGYI0250 25 mm SC PFPGYI0320 32 mm SC PFPGYI0400 40 mm SC PFPGYI0500 50 mm SC PFPGYI0630 63 mm SC PFPGYI0750 75 mm SC PFPGYI0900 90 mm SC PFPGYI1100 110 mm SC PVC Fitting Plain Socket (Metric) PFPMAI0200 20 mm SC PFPMAI0250 25 mm SC PFPMAI0320 32 mm SC PFPMAI0400 40 mm SC PFPMAI0500 50 mm SC PFPMAI0630 63 mm SC PFPMAI0750 75 mm SC PFPMAI0900 90 mm SC PFPMAI1100 110 mm SC PVC Fitting Reducing Piece (M/F) PFPMRI032B 25mm SC x 32mm SC x 20mm SC PFPMRI040B 32mm SC x 40mm SC x 20mm SC PFPMRI040C 32mm SC x 40mm SC x 25mm SC PFPMRI050B 40mm SC x 50mm SC x 20mm SC PFPMRI050C 40mm SC x 50mm SC x 25mm SC PFPMRI050D 40mm SC x 50mm SC x 32mm SC PFPMRI063C 50mm SC x 63mm SC x 25mm SC PFPMRI063D 50mm SC x 63mm SC x 32mm SC PFPMRI063E 50mm SC x 63mm SC x 40mm SC PFPMRI075E 63mm SC x 75mm SC x 40mm SC PFPMRI075F 63mm SC x 75mm SC x 50mm SC PFPMRI090F 75mm SC x 90mm SC x 50mm SC PFPMRI090G 75mm SC x 90mm SC x 63mm SC PFPMRI110F 90mm SC x 110mm SC x 50mm SC PFPMRI110G 90mm SC x 110mm SC x 63mm SC PFPMRI110H 90mm SC x 110mm SC x 75mm SC PFPMRI125F 110mm SC x1 25mm SC x 50mm SC PFPMRI125G 110mm SC x1 25mm SC x 63mm SC PFPMRI125H 110mm SC x1 25mm SC x 75mm SC PFPMRI125I 110mm SC x1 25mm SC x 90mm SC PVC Fitting Reducing Socket PFPMRI160L 160 mm SC x 110mm SC PVC Fitting Plain Reducing Tee 90° (Metric) PFPTRI032B 32mm SC x 20mm SC PFPTRI032C 32mm SC x 25mm SC PFPTRI050B 50mm SC x 20mm SC PFPTRI050C 50mm SC x 25mm SC PFPTRI050D 50mm SC x 32mm SC PFPTRI063B 63mm SC x 20mm SC PFPTRI063C 63mm SC x 25mm SC PFPTRI063D 63mm SC x 32mm SC PFPTRI063F 63mm SC x 50mm SC PFPTRI075D 75mm SC x 32mm SC PFPTRI075E 75 mm SC x 40 mm SC PFPTRI075F 75 mm SC x 50 mm SC PFPTRI075G 75 mm SC x 63 mm SC PFPTRI090E 90 mm SC x 40 mm SC PFPTRI090F 90 mm SC x 50 mm SC PFPTRI090G 90 mm SC x 63 mm SC PFPTRI090H 90 mm SC x 75 mm SC PFPTRI110F 110 mm SC x 50 mm SC PFPTRI110G 110 mm SC x 63 mm SC PFPTRI110H 110 mm SC x 75 mm SC PFPTRI110I 110 mm SC x 90 mm SC PVC Fitting Plain Serrated Stub Flange (Metric) PFPQRI0250 25 mm SC PFPQRI0320 32 mm SC PFPQRI0400 40 mm SC PFPQRI0500 50 mm SC PFPQRI0630 63 mm SC PFPQRI0750 75 mm SC PFPQRI0900 90 mm SC PFPQRI1100 110 mm SC PVC Fitting Plain Reducing Bush (Metric) PFPRCI025B 25mm SC x 20mm SC PFPRCI032B 32mm SC x 20mm SC PFPRCI032C 32mm SC x 25mm SC PFPRCI040B 40mm SC x 20mm SC PFPRCI040C 40mm SC x 25mm SC PFPRCI040D 40mm SC x 32mm SC PFPRCI050C 50mm SC x 25mm SC PFPRCI050D 50mm SC x 32mm SC PFPRCI050E 50mm SC x 40mm SC PFPRCI063C 63mm SC x 25mm SC PFPRCI063D 63mm SC x 32mm SC PFPRCI063E 63mm SC x 40mm SC PFPRCI063F 63mm SC x 50mm SC PFPRCI075D 75mm SC x 32mm SC PFPRCI075E 75mm SC x 40mm SC PFPRCI075F 75mm SC x 50mm SC PFPRCI075G 75mm SC x 63mm SC PFPRCI090F 90mm SC x 50mm SC PVC Fitting Plain Cap (Metric) PFPCAI0200 20 mm SC PFPCAI0250 25 mm SC PFPCAI0320 32 mm SC PFPCAI0400 40 mm SC PFPCAI0500 50 mm SC PFPCAI0630 63 mm SC PFPCAI0750 75 mm SC PFPCAI0900 90 mm SC PFPCAI1100 110 mm SC PVC Fitting Loose Flange PFPFLI0500 50 mm SC PFPFLI0630 63 mm SC PFPFLI0750 75 mm SC PFPFLI0900 90 mm SC PFPFLI1100 110 mm SC PVC Fitting Plain Union with O-Ring PFPBOI0200 20 mm SC PFPBOI0250 25 mm SC PFPBOI0320 32 mm SC PFPBOI0400 40 mm SC PFPBOI0500 50 mm SC PFPBOI0630 63 mm SC PFPBOI0750 75 mm SC PFPBOI0900 90 mm SC PFPBOI1100 110 mm SC PVC Fitting Adaptor Threaded Elbow 90° PFTGOF0200 ½˝ PFTGOF0250 ¾˝ PFTGOF0320 1˝ PFTGOF0400 1¼˝ PFTGOF0500 1½˝ PFTGOF0630 2˝ PVC Fitting Threaded Elbow 45° (Imperial) PFTGYF0500 1½˝ PFTGYF0630 2” BSP PVC Fitting Threaded 90° Tee Female BSP PFTTIF0200 ½˝ PFTTIF0250 ¾˝ PFTTIF0320 1˝ PFTTIF0400 1¼˝ PFTTIF0500 1½˝ PFTTIF0630 2˝ PVC Fitting Reducer Male/Female PFTRIF025B ¾˝ x ½˝ PFTRIF032B 1” BSP x ½˝ PFTRIF032C 1” BSP x ¾˝ PFTRIF050D 1½” BSPx1” BSP PFTRIF063C 2” BSP X ¾˝ PFTRIF063D 2” BSPx1” BSP PFTRIF063E 2” BSPx 1¼˝ PFTRIF063F 2” BSPx1½˝ PVC Fitting Adaptor Union Threaded BSP (F/M) PFTBOF0200 ½˝ PFTBOF0250 ¾˝ PFTBOF0320 1” BSP PFTBOF0400 1¼” BSP PFTBOF0500 1½˝ PFTBOF0630 2” BSP PVC Fitting Threaded Socket Female BSP PFTMAF0200 ½˝ PFTMAF0250 ¾˝ PFTMAF0320 1” BSP PFTMAF0400 1¼” BSP PFTMAF0500 1½˝ PFTMAF0630 2” BSP PVC Fitting Threaded Nipple Male BSP PFTNIF0200 ½˝ PFTNIF0250 ¾˝ PFTNIF0320 1” BSP PFTNIF0400 1¼” BSP PFTNIF0500 1½˝ PFTNIF0630 2” BSP PVC Fitting Cap Threaded PFTCAF0200 ½˝ PFTCAF0250 ¾˝ PFTCAF0320 1” BSP PFTCAF0400 1¼” BSP PFTCAF0500 1½˝ PFTCAF0630 2” BSP PVC Fitting 90O Elbow Plain Threaded PFAGOR020B 20 mm SC x½˝ PFAGOR025C 25mm SC x¾˝ PFAGOR032D 32mm SC x1” BSP PFAGOR040E 40mm SC x1¼” BSP PFAGOR050F 50mm SC x1½˝ PFAGOR063G 63mm SC x2” BSP PVC Fitting Adaptor 90° Tee Plain to BSP PFATIR020B 20 mm SC X½˝ PFATIR025C 25mm SC x¾˝ PFATIR032D 32mm SC x1” BSP PFATIR040E 40 mm SC x 1¼” BSP PFATIR050F 50mm SC x1½˝ PFATIR063G 63mm SC x2” BSP PVC Fitting 90O Tee Reduced Plain Threaded PFATRIR032C 32 mm SC x ¾” BSP PFATRIR050B 50 mm SC x ½” BSP PFATRIR050D 50 mm SC x 1” BSP PFATRIR063B 63 mm SC X ½” BSP PFATRIR063D 63 mm SC x 1” BSP PVC Fitting Male Adaptor PFAAMR020B 20x 25mm SC x½” BSP PFAAMR025B 25mm SC x 32mm SC x½” BSP PFAAMR025C 25mm SC x 32mm SC x¾” BSP PFAAMR025D 25mm SC x 32mm SC x1” BSP PFAAMR032C 32mm SC x 40mm SC x¾” BSP PFAAMR032D 32mm SC x 40mm SC x1” BSP PFAAMR040E 40mm SC x 50mm SC x1¼” BSP PFAAMR040F 40mm SC x 50mm SC x1½” BSP PFAAMR050F 50mm SC x 63mm SC x1½” BSP PFAAMR050G 50mm SC x 63mm SC x2” BSP PFAAMR063F 63mm SC x 75mm SC x1½” BSP PFAAMR063G 63mm SC x 75mm SC x2” BSP PFAAMR075G 75mm SC x 90mm SC x2” BSP PVC Fitting Adaptor Reducing Bush PFARCC032B 32 mm SC x ½” BSP PFARCC032C 32 mm SC x ¾” BSP PFARCC040D 40mm SC x1” BSP PFARCC050E 50mm SC x1¼” BSP PVC Fitting Female Adaptor PFAMAR020B 20 mm SC X½” BSP PFAMAR025C 25mm SC x¾” BSP PFAMAR040E 40mm SC x1¼” BSP PFAMAR050F 50mm SC x1½” BSP PFAMAR063G 63mm SC x2” BSP PVC Fitting Union with O-Ring Plain Threaded PFABOR020B 20 mm SC X½” BSP PFABOR025C 25mm SC x¾” BSP PFABOR032D 32mm SC x1” BSP PFABOR040E 40mm SC x1¼” BSP PFABOR050F 50mm SC x1½” BSP PFABOR063G 63mm SC x2” BSP PVC Fitting Plain Socket 90o Elbow PFPGOP0200 ½” PFPGOP0250 ¾” PFPGOP0320 1” PFPGOP0400 1¼” PFPGOP0500 1½” PFPGOP0630 2” PFPGOP0750 2½” PFPGOP0900 3” PFPGOP1100 4” PFPGOP1600 6” PFPGOP2250 8” PVC Fitting Plain Socket 45o Elbow PFPGYP0200 ½” PFPGYP0250 ¾” PFPGYP0320 1” PFPGYP0400 1¼” PFPGYP0500 1½” PFPGYP0630 2” PGPGYP0900 3” PFPGYP1100 4” PVC Fitting Plain 90o Tee (Imperial) PFPTIP0200 ½” PFPTIP0250 ¾” PFPTIP0320 1” PFPTIP0400 1¼” PFPTIP0500 1½” PFPTIP0630 2” PFPTIP0900 3” PFPTIP1100 4” PVC Fitting Socket PFPMAP0200 ½” PFPMAP0250 ¾” PFPMAP0320 1” PFPMAP0400 1¼” PFPMAP0500 1½” PFPMAP0630 2” PFPMAP0900 3” PFPMAP1100 4” PVC Reducing Bush PFPRCP025B ¾” x ½” PFPRCP032B 1” x ½” PFPRCP032C 1” x ¾” PFPRCP040D 1¼” x1” PFPRCP050C 1½” x¾” PFPRCP050D 1½” x1” PFPRCP050E 1½” x1¼” PFPRCP063D 2” x1” PFPRCP063F 2” x1 ½” PFPRCP090F 3” x1\½” PFPRCP090G 3” x2” PFPRCP110G 4” x2” PFPRCP110I 4” x3” PVC Fitting 90o Tee Reducing PFPTRP032B 1” x ½” PFPTRP032C 1” x ¾” PFPTRP050D 1½” x1” PFPTRP063C 2” X ¾” PFPTRP063D 2” x1” PFPTRP063F 2” x1½” PFPTRP090F 3” x1½” PFPTRP090G 3” x2” PFPTRP110F 4” x1½” PFPTRP110G 4” x2” PVC Fitting Stub Flange PFPQRP0200 ½” PFPQRP0250 ¾” PFPQRP0320 1” PFPQRP0400 1¼” PFPQRP0500 1½” PFPQRP0630 2” PFPQRP0900 3” PFPQRP1100 4” PVC Fitting Plain Cap PFPCAP0200 ½” BSP PFPCAP0250 ¾” BSP PFPCAP0320 1” BSP PFPCAP0400 1¼” BSP PFPCAP0500 1½” BSP PFPCAP0630 2” BSP PVC Fitting Union with O-Ring PFPBOP0200 ½” BSP PFPBOP0250 ¾” BSP PFPBOP0320 1” BSP PFPBOP0400 1¼” BSP PFPBOP0500 1½” BSP PFPBOP0630 2” BSP PFPBOP0900 3” BSP PFPBOP1100 4” BSP PVC Fitting Adaptor Plain/Threaded 90o Elbow All Threaded BSP PFAGOC020B ½” BSP x ½” BSP PFAGOC025C ¾” BSP x ¾” BSP PFAGOC032D 1” BSP x 1” BSP PFAGOC040E 1¼” BSPx 1¼” BSP PFAGOC050F 1½” BSPx 1½” BSP PFAGOC063G 2” BSP x 2” BSP PVC Fitting Female Adaptor PFAMAC0200 ½” BSPx½” BSP PFAMAC0250 ¾” BSPx¾” BSP PFAMAC0320 1” BSPX1” BSP PFAMAC0400 1¼” BSPx1¼” BSP PFAMAC0500 1½” BSPx1½” BSP PFAMAC0630 2” BSPX2” BSP PVC Fitting Tee Plain/Threaded PFATICR020B ½” BSPx½” BSP PFATICR025C ¾” BSPx¾” BSP PFATICR032D 1” BSPX1” BSP PFATICR040E 1¼” BSPx1¼” BSP PFATICR050F 1½” BSPx1½” BSP PFATICF063G 2” BSPX2” BSP PVC Fitting Male Threaded Adaptor PFAAMC0200 ½” BSPx¾” BSPx½” BSP PFAAMC0250 ¾” BSPx1” BSPx¾” BSP PFAAMC0320 1” BSPx1¼” BSPx1” BSP PFAAMC0400 1¼” BSPx1½” BSPx1½” BSP PFAAMC050F 1½” BSPx2” BSPx1½” BSP PFAAMC0630 2” BSPx2½” BSPx2” BSP P PVC Fitting Adaptor Socket PFAMAB020B 20 mm SC x½” BSP PFAMAB025C 25mm SC x¾” BSP PFAMAB032D 32mm SC x1” BSP PFAMAB040E 40mm SC x1¼” BSP PFAMAB050F 50mm SC x1½” BSP PFAMAB063G 63mm SC x2” BSP PVC Fitting Tee Reducer PFATRF032B 1” x ½” PFATRF032C 1” x ¾” PFATRF050B 1½” x1½” PFATRF050C 1½” x¾” PFATRF063B 2” x1½” PFATRF063C 2” x¾” PVC Fitting Union with O-Ring Plain Threaded PFABOC0200 ½” BSP x ½” BSP PFABOC0250 ¾” BSP x ¾” BSP PFABOC0320 1” BSP x 1” BSP PFABOC0400 1¼” BSP x 1¼” BSP PFABOC0500 1½” BSP x 1½” BSP PFABOC0630 2” BSP x 2” BSP PVC Fitting Union with O-Ring Plain (Metric/Imp.) PFABOB0200 20 mm SC x ½” BSP PFABOB0250 25 mm SC x ¾” BSP PFABOB0320 32 mm SC x 1” BSP PFABOB0400 40 mm SC x 1¼” BSP PFABOB0500 50 mm SC x 1½” BSP PFABOB0630 63 mm SC x 2” BSP PVC Fitting Union F/M with O-Ring Plain/ Threaded PFABOCM050F 1½” BSP x 1½” BSP PFABOCM063G 2” BSP x 2” BSP PVC Fitting Union F/M with O-Ring Plain/ Threaded PFABORM050F 50mm x 1½” BSP PFABORM063G 63mm x 2” BSP

Approval Holder:: PPFV Ltd.

Company Name
PPFV Ltd.
Address
6 Cedar Trade Park Cobham Road Ferndown Industrial Estate Wimbourne
Postcode
BH21 7SD
Country
United Kingdom
Phone
01202 283660
General Email
paul.hobby@ppfv.uk

View All Listings by this Company
Manufacturer:: Niesco For Modern Water Systems Production

Company Name
Niesco For Modern Water Systems Production
Address
Industrial District Six, Piece 69, 71, Badr City, Cairo
Country
Egypt
General Email

View All Listings by this Company

WRAS Approval Number: #240404724

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404724
Size:: Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.
Marking:: IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:: Hevac Ltd

Company Name
Hevac Ltd
Address
Muirfield Drive Naas Road Dublin 12
Postcode
D12 X0A3
Country
Ireland
Phone
0035 314 191924
General Email
dave.grenville@hevac.ie

View All Listings by this Company
Manufacturer:: IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:: IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company

WRAS Approval Number: #241004054

Range of stainless-steel press fittings (SUS304 or 316L) with EPDM ‘O’-rings for use with stainless-steel pipe (SUS304 or 316L EN 10312), using an ‘M’ press profile. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 241004054
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: SEE MODEL
Marking:: KPress logo, material and size on body.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: HB-H15XXX - 45 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I15XXX - 45 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H16XXX - 45 Degree Plain End Elbow - SUS304 - 28, 35, 42, 54. HB-I16XXX - 45 Degree Plain End Elbow - SUS316L - 28, 35, 42, 54. HB-H07XXX - 90 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I07XXX - 90 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H08XXX - 90 Degree Female Thread Elbow - SUS304 - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-I08XXX - 90 Degree Female Thread Elbow - SUS316L - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-H09XXX - 90 Degree Male Thread Elbow - SUS304 - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-I09XXX - 90 Degree Male Thread Elbow - SUS316L - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-H14XXX - 90 Degree Plain End Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I14XXX - 90 Degree Plain End Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H18XXX - Cap - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I18XXX - Cap - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H01XXX - Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I01XXX - Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H03XXX - Male Thread Adapter - SUS304 - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-I03XXX - Male Thread Adapter - SUS316L - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-H24XXX - Plain End Coupling - SUS304 - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-I24XXX - Plain end Coupling - SUS316L - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-H02XXX - Reducing Coupling - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I02XXX - Reducing Coupling - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H13XXX - Reducing Cross - SUS304 - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-I13XXX - Reducing Cross - SUS316L - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-H06XXX - Reducing Tee - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I06XXX - Reducing Tee - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H19XXX - Slip Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I19XXX - Slip Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H11XXX - Tee with male Thread - SUS304 - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-I11XXX - Tee with male Thread - SUS316L - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-H20XXX - Union Adapter - SUS304 - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-I20XXX - Union Adapter - SUS316L - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-H05XXX - Equal Tee - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I05XXX - Equal Tee - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H12XXX - Equal Cross - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I12XXX - Equal Cross - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H10XXX - Tee with Female Thread - SUS304 - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-I10XXX - Tee with Female Thread - SUS316L - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-H00XXX - Stainless Steel Pipe - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I00XXX - Stainless Steel Pipe - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108.

Approval Holder:: Kesanitar GmbH

Company Name
Kesanitar GmbH
Address
Märkische Straße 12, 47809 Krefeld, NRW
Country
Germany
Phone
+49 2151 3624071
General Email
info@kesanitar.com

View All Listings by this Company

WRAS Approval Number: #251115001

‘F17’ range of brass press fittings with EPDM ‘O’-rings for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved via a crimping tool using either a ‘U’, ‘TH’ or ‘H’ profile. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251115001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Equal Straight Union: 16mm - 32mm, Unequal Straight Union: 20mmx16mm - 32mmx26mm, Male Straight Union: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Straight Union: 16mmx⅜” BSP (F) - 32mmx1” BSP (F), Equal Elbows: 16mm - 32mm, Unequal Elbows: 20mmx16mm - 32mmx25mm, Male Elbows: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Elbows: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), Equal Tees: 16mm - 32mm, Unequal Tees: 16mmx20mmx16mm - 32mmx26mmx32mm, Female Tee: 16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F), Male tee: 16mmx16mmx⅜” BSP (M) - 25mmx25mmx¾” BSP (M), Wall-plated female elbow: 16mmx⅜” BSP (F) - 26mmx¾” BSP (F), Demountable female straight union: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), End cap: 16mm - 32mm.
Marking:: RIFENG, size, crimp profile (U-TH-H) and production date (MM/YYYY) on crimp sleeve.
Installation Requirements:: R001
Expiry date:: 30/11/2030
Model:: Equal Straight Union (16mm - 32mm): F17-S1216x1216, F17-S1620x1620, F17-S2025x2025, F17-S2026x2026, F17-S2632x2632. Unequal Straight Union (20mmx16mm - 32mmx26mm): F17-S1620x1216, F17-S2025x1216, F17-S2025x1620, F17-S2026x1216, F17-S2026x1620, F17-S2632x1216, F17-S2632x1620, F17-S2632x2025, F17-S2632x2026. Male Straight Union (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): F17-S1216x3/8, F17-S1216x1/2, F17-S1216x3/4, F17-S1620x1/2, F17-S1620x3/4, F17-S1620x1, F17-S2025x3/4, F17-S2025x1, F17-S2026x3/4, F17-S2026x1, F17-S2632x1. Female Straight Union (16mmx⅜” BSP (F) - 32mmx1” BSP (F)): F17-S1216x3/8F, F17-S1216x1/2F, F17-S1216x3/4F, F17-S1620x1/2F, F17-S1620x3/4F, F17-S1620x1F, F17-S2025x3/4F, F17-S2025x1F, F17-S2026x3/4F, F17-S2026x1F, F17-S2632x1F. Equal Elbows (16mm - 32mm): F17-L1216x1216, F17-L1620x1620, F17-L2025x2025, F17-L2026x2026, F17-L2632x2632. Unequal Elbows (20mmx16mm - 32mmx25mm): F17-L1620*1216, F17-L2025*1216, F17-L2025*1620, F17-L2632*2025. Male Elbows (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): F17-L1216x3/8, F17-L1216x1/2, F17-L1216x3/4, F17-L1620x1/2, F17-L1620x3/4, F17-L1620x1, F17-L2025x3/4, F17-L2025x1, F17-L2026x3/4, F17-L2026x1, F17-L2632x1. Female Elbows (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): F17-L1216x3/8F, F17-L1216x1/2F, F17-L1216x3/4F, F17-L1620x1/2F, F17-L1620x3/4F, F17-L2025x3/4F, F17-L2026x3/4F, F17-L2025x1F, F17-L2632x1F. Equal Tees (16mm - 32mm): F17-T1216x1216x1216, F17-T1620x1620x1620, F17-T2025x2025x2025, F17-T2026x2026x2026, F17-T2632x2632x2632. Unequal Tees (16mmx20mmx16mm - 32mmx26mmx32mm): F17-T1216x1620x1216, F17-T1216x2025x1216, F17-T1620x1216x1216, F17-T2025x1216x1216, F17-T2026x1216x1216, F17-T2026x1216x1620, F17-T1620x1216x1620, F17-T1620x1620x1216, F17-T1620x2025x1620, F17-T1620x2026x1620, F17-T2025x1216x2025, F17-T2025x1620x1620, F17-T2025x2025x1620, F17-T2025x1620x2025, F17-T2026x1216x2026, F17-T2026x1620x1620, F17-T2026x1620x2026, F17-T2026x2026x1620, F17-T2632x1216x2632, F17-T2632x1620x2632, F17-T2632x2026x2026, F17-T2632x2025x2632, F17-T2632x2026x2632. Female Tee (16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F)): F17-T1216x3/8Fx1216, F17-T1216x1/2Fx1216, F17-T1620x1/2Fx1620, F17-T1620x3/4Fx1620, F17-T2025x1/2Fx2025, F17-T2025x3/4Fx2025, F17-T2026x1/2Fx2026, F17-T2026x3/4Fx2026, F17-T2632x3/4Fx2632, F17-T2632x1Fx2632. Male tee (16mmx16mmx⅜” BSP (M) - 25mmx25mmx¾” BSP (M)): F17-T1216x3/8x1216, F17-T1216x1/2x1216, F17-T1620x1/2x1620, F17-T1620x3/4x1620, F17-T2025x1/2x2025, F17-T2025x3/4x2025. Wall-plated female elbow (16mmx⅜” BSP (F) - 26mmx¾” BSP (F)): F17-L1216x3/8F (Z), F17-L1216x1/2F (Z), F17-L1620x1/2F (Z), F17-L1620x3/4F (Z), F17-L2025x3/4F (Z), F17-L2026x3/4F (Z). Demountable female straight union (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): F17-S1216x3/8F (H), F17-S1216x1/2F (H), F17-S1216x3/4F (H), F17-S1620x1/2F (H), F17-S1620x3/4F (H), F17-S2025x3/4F (H), F17-S2026x3/4F (H), F17-S2632x1F (H). End cap (16mm - 32mm): F17-D1216, F17-D1620, F17-D2025, F17-D2026, F17-D2632.

Approval Holder:: Rifeng Enterprise (Foshan) Co., Ltd.

Company Name
Rifeng Enterprise (Foshan) Co., Ltd.
Address
F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province
Postcode
528318
Country
China
Phone
+86 757 8203 1672
General Email
lio-lu@rifeng.com

View All Listings by this Company
Manufacturer:: Rifeng Enterprise (Foshan) Co., Ltd.

Company Name
Rifeng Enterprise (Foshan) Co., Ltd.
Address
F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province
Postcode
528318
Country
China
Phone
+86 757 8203 1672
General Email
lio-lu@rifeng.com

View All Listings by this Company