Range of non-rising spindle gate valves with DZR brass bodies. Operating members are either handwheel operated or lockshield. Maximum working pressure: 20.0 bar. Maximum operating temperature: 100°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250608012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½" - 2" BSP (F), ½" - 2" NPT (F), ½" - 2" BSPT (F).

Marking:

Hattersley logo HNH, CR, size & pressure on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Fig 30VLS (lockshield operated), Fig 30V (handwheel operated).

Approval Holder:

Hattersley

Company Name

Hattersley

Address

11-15 Epsilon Terrace West Road Ipswich Suffolk

Postcode

IP3 9FJ

Country

United Kingdom

Phone

0766465023

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of gate valves with ductile iron bodies (blue epoxy powder coated) incorporating EPDM encapsulated Wedge and bonnet with EPDM `O` rings and gaskets. Valves incorporate handwheel type operating member. Maximum working pressure 16.0 Bar. Maximum operating temperature 60.0°C

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250602037

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model below

Marking:

R&D Multiples (METAL CAST) PVT LTD, Size, Pressure and serial number on data plate. R&D and PN16 cast on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

GLV03: 50mm Flanged 80mm Flanged 100mm Flanged 150mm Flanged 200mm Flanged 250mm Flanged 300mm Flanged 350mm Flanged 400mm Flanged 450mm Flanged 500mm Flanged 600mm Flanged

Product Images

Manufacturer:

R&D Multiples (Metal Cast) Pvt Ltd

Company Name

R&D Multiples (Metal Cast) Pvt Ltd

Address

Survey No 304 Village Balda Pardi 396 125 District India

View All Listings by this Company

Range of gate valves with brass bodies, non-rising spindles and hand wheel operating members. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

2290 Valves

Section Subtitle:

Stop, gate, metal.

WRAS Approval Number:

250615005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Zhejiang Valogin Technology Co., Ltd. trademark logo (‘V&G’), size and PN on body. Zhejiang Valogin Technology Co., Ltd. trademark logo (‘V&G’) and WRAS on operating member (disc).

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

11.06271.G15.CP5R-2030: ½” BSP (F)x(F), 11.06271.G20.CP5R-2030: ¾” BSP (F)x(F), 11.06271.G25.CP5R-2030: 1” BSP (F)x(F), 11.06271.G32.CP5R-2030: 1¼” BSP (F)x(F), 11.06271.G40.CP5R-2030: 1½” BSP (F)x(F), 11.06271.G50.CP5R-2030: 2” BSP (F)x(F), 11.06281.G15.CP5R-2030: ½” BSP (F)x(F), 11.06281.G20.CP5R-2030: ¾” BSP (F)x(F), 11.06281.G25.CP5R-2030: 1” BSP (F)x(F), 11.06281.G32.CP5R-2030: 1¼” BSP (F)x(F), 11.06281.G40.CP5R-2030: 1½” BSP (F)x(F), 11.06281.G50.CP5R-2030: 2” BSP (F)x(F).

Product Images

Approval Holder:

Zhejiang Valogin Technology Co., Ltd.

Company Name

Zhejiang Valogin Technology Co., Ltd.

Address

Qinggang Technological Industrial Zone Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Valogin Technology Co., Ltd.

Company Name

Zhejiang Valogin Technology Co., Ltd.

Address

Qinggang Technological Industrial Zone Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Range of commercial dish washing machines with flow controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 4.0 bar. Cold water use only.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2303402

Size:

¾” BSP(F) captive nut

Marking:

'FAGOR' Professional & logo & address. Model, date, & technical data on label plate

Installation Requirements:

R001 R574

Expiry date:

31/03/2028

Model:

WLP-62, WLP-63, WLP-70 & WLP-130

Approval Holder:

Onnera Group S. Coop

Company Name

Onnera Group S. Coop

Address

Santxo Lopegeti Auzoa 22 20560 Onati-Gipuzkoa

Country

Spain

View All Listings by this Company

Range of commercial dish washing machines. Flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure: 4.0 Bar. Maximum operating temperature: 60°C.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

250402712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PVC bodied appliance hose with an EPDM inner liner incorporating a ¾” BSP (F) captive nut end connection.

Marking:

DC Products logo on control panel. DC Products logo, model name and other technical information on adhesive label on side of body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

ED50A, ED900A, SD40A, SXD40A, SD45A, SD50A, SXD45A, SXD50A, PG/PD40A, PG/PD45A, PG/PD50A, OG/OD40A, OG/OD50A, X600A, X700A, W700A, W1100, W1400A, W1400SA, SD900A, SD1000A, SD1300A, SD1350A, PD1000A, PD1300A, PD1350A, OD1400A, OD1425A, OD1450A, DC57-42A, DC57-62A, DC67A, DC109A. Key: SD = Standard series dish, SXD = Standard extra dish, ED = ECONOMY SERIES DISH, PG/PD = Premium series glass/Premium range dish, OG/OD = Optima series glass/dish W or X = washrite range. DC = Direct Catering Range (the numbers for the DC range also represent basket size). The number 40, 45 and 50 numbers relate to the basket size. The numbers 600, 700, 900, 1000, 1100, 1350, 1400 are arbitrary number or once related to the pump sizes. Any model that has the letter ‘A’ immediately after the model number signifies that the break tank has been fitted. Additional suffixes of varying character may be present after the letter ‘A’, e.g. ‘PD50A D’ List of available suffixes: BPI – boost pump CP – chemical pumps D – Drain pump DL – lock DP – detergent pump DR – Dryer HR – recovery IS – Softener LT – Light RDP – rinse and detergent pumps RP – rinse pump SW – Saniwash TD – thermos Disinfection UV – UV light. All the above models have the same pathway.

Approval Holder:

DC Products Ltd

Company Name

DC Products Ltd

Address

Unit 25 lodge hill Industrial Park Westbury Sub Mendip Somerset

Postcode

BA5 1EY

View All Listings by this Company