'LHS001P'. Off-white (translucent), extruded PEX hose. For use with water up to 60°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2301522

Expiry date:

31/01/2028

Approval Holder:

Ningbo LOHAS Tube Products Co., Ltd.

Company Name

Ningbo LOHAS Tube Products Co., Ltd.

Address

Luojiang Industrial Zone, Hemudu, Yuyao, Yuya, Ningbo City

Country

China

View All Listings by this Company

'SABIC® Vestolen A RELY 5922R 10000'. Black coloured, compression moulded HDPE material. For use with water up to 23°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2301515

Expiry date:

31/01/2028

Approval Holder:

SABIC Petrochemicals B.V.

Company Name

SABIC Petrochemicals B.V.

Address

Europaboulevard 1, 6135 PD Sittard

Country

Netherlands

Phone

+31 (46) 7222222

View All Listings by this Company

'SABIC® Vestolen A 5061R 10000'. Black coloured, compression moulded HDPE material. For use with water up to 23°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2301516

Expiry date:

31/01/2028

Approval Holder:

SABIC Petrochemicals B.V.

Company Name

SABIC Petrochemicals B.V.

Address

Europaboulevard 1, 6135 PD Sittard

Country

Netherlands

Phone

+31 (46) 7222222

View All Listings by this Company

‘SABIC® Vestolen A 6060 R 10000 (black)’. Black coloured, extruded HDPE material. For use with water up to 23°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2301517

Expiry date:

31/01/2028

Approval Holder:

SABIC Petrochemicals B.V.

Company Name

SABIC Petrochemicals B.V.

Address

Europaboulevard 1, 6135 PD Sittard

Country

Netherlands

Phone

+31 (46) 7222222

View All Listings by this Company

'TASNEE 100 Blue' (manufactured in Saudi Arabia) Blue coloured, injection moulded polyethylene material. For use with water up to 23°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2201541

Expiry date:

31/01/2027

Approval Holder:

TASNEE

Company Name

TASNEE

Address

Technology & Innovation Center, First supporting Area, Lulu street 100 Al Jubail Industrial City

Country

Saudi Arabia

View All Listings by this Company

‘DEWALT PV60-PRO’. Site applied, grey coloured chemical anchor resin which is supplied in a pre-mixed cartridge. Apply as per manufacturer’s instructions rev. 1, version 16/01/2023. Cure for 4 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5311 Resin Anchors

Expiry date:

31/05/2027

Approval Holder:

Stanley Black & Decker Deutschland GmbH

Company Name

Stanley Black & Decker Deutschland GmbH

Address

Richard-Klinger-Str. 11, 65510 Idstein

Country

Germany

View All Listings by this Company

'80EP251p 'O' ring'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 80. Tested in-radius size 0.89mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

2212555

Expiry date:

31/12/2027

Approval Holder:

Bode GmbH

Company Name

Bode GmbH

Address

Kirchweg 114, 24558 Henstedt-Ulzburg

Country

Germany

Phone

Tel: +49 4193 9821234 Fax: +49 4193 9822244

View All Listings by this Company

‘51M5577, 51M6077, 51M6577, 51M7077, 51M7577, 51M8077, 51M8577’. Black coloured, injection moulded EPDM materials. Shore hardness between 55A & 85A. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2212558

Expiry date:

31/12/2027

Approval Holder:

WOCO Industrietechnik GmbH

Company Name

WOCO Industrietechnik GmbH

Address

Hanauer Landstrabe 16, D 63628 Bad Soden - Salmunster

Country

Germany

View All Listings by this Company

'APE 55 N'. Black coloured, injection moulded EPDM rubber material. Shore hardness 55. Tested in-radius 1.1mm. For use with water up to 23°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2211560

Expiry date:

30/11/2027

Approval Holder:

Intermarp (Italia) Spa

Company Name

Intermarp (Italia) Spa

Address

Via Matteotti 42/46, 1-28060 Granozzo (Novara)

Country

Italy

Phone

+39 0321 555811 Fax: +39 0321 555800

View All Listings by this Company

‘TWK7534, TWK5810, TWK5811, TWK5812, TWK5813, TWK5814, TWK5815’. Black coloured, injection moulded EPDM materials. Shore hardness between 55A & 85A. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2212559

Expiry date:

31/12/2027

Approval Holder:

Polymer-Technik Elbe GmbH

Company Name

Polymer-Technik Elbe GmbH

Address

Heuweg 5, 06886 Lutherstadt Wittenberg

Country

Germany

Phone

+49-3491-659-155

View All Listings by this Company