Directory Search Results

Print List

#2105042

Bottom Entry BS1212-4 (2016) compact type float operated valves for WC flushing cisterns. Incorporates plastic body and ½’’ BSP inlet. The inlet incorporates a plastic strainer and flow restrictor. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2105042
Note:
IRN R560 applies to the bottom entry version
Size:
½” BSP (M)
Marking:
Oceanwell, model and BS1212-4 on float.
Installation Requirements:
R001 R008 R550 R560
Expiry date:
31/05/2026
Model:
CJ104

Approval Holder:
Oceanwell (Xiamen) Industrial Co.,Ltd
Company Name
Oceanwell (Xiamen) Industrial Co.,Ltd
Address
33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen
Country
China
Phone
+86-592-5710506

View All Listings by this Company
Manufacturer:
Oceanwell (Xiamen) Industrial Co.,Ltd
Company Name
Oceanwell (Xiamen) Industrial Co.,Ltd
Address
33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen
Country
China
Phone
+86-592-5710506

View All Listings by this Company

Print This Approval


#2106002

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The cistern incorporates an angled servicing valve and a stainless-steel braided EPDM lined flexible hose assembly installed prior to the inlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106002
Size:
½" BSP (M)
Marking:
Fluidmaster label on front of cistern. Schwab on label inside cistern and on flush plate surround.
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
5-481-515 Concealed Cistern UP 189 - 747 (cistern only). 5-399-135 DUPLO WC 189 PREMIUM 747 FV (cistern with frame).

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company
Manufacturer:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company

Print This Approval


#2109300

Spring loaded resilient trim, in-line check valve cartridge with plastic guides and stem and EPDM seals within a plastic housing. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 16.0 bar & maximum operating temperature 65°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2109300
Size:
DN6
Marking:
Neoperl, flow arrow & size on body.
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
OD8/DN6 – 31.4201.0

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2109337

Type TK, spring loaded resilient trim, in-line check valve cartridge with plastic guides and stem and EPDM seals within a plastic housing. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2109337
Size:
DN32
Marking:
Ocean (brand of Watts Ocean) & DN32 on body.
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
IN DN 32 (Catalogue number 149F043491 & part number W149032610).

Approval Holder:
Socla SAS
Company Name
Socla SAS
Address
365, Rue du Lt Putier, 71530 Virey Le Grand, France
Phone
+33 3 85 97 42 42

View All Listings by this Company
Manufacturer:
Socla SAS
Company Name
Socla SAS
Address
365, Rue du Lt Putier, 71530 Virey Le Grand, France
Phone
+33 3 85 97 42 42

View All Listings by this Company

Print This Approval


#2109348

Type TK, spring loaded resilient trim, in-line check valve cartridge with plastic guides and stem and EPDM seals within a plastic housing. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2109348
Size:
DN40
Marking:
Ocean (brand of Watts Ocean) & DN40 on body.
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
IN DN 40 (Catalogue No. 149F043492, Part No.W149040610)

Approval Holder:
Socla SAS
Company Name
Socla SAS
Address
365, Rue du Lt Putier, 71530 Virey Le Grand, France
Phone
+33 3 85 97 42 42

View All Listings by this Company
Manufacturer:
Socla SAS
Company Name
Socla SAS
Address
365, Rue du Lt Putier, 71530 Virey Le Grand, France
Phone
+33 3 85 97 42 42

View All Listings by this Company

Print This Approval


#2109340

Range of in-line, non-verifiable single check valve assemblies consisting of a spring loaded, resilient trim, single check valve cartridge housed within a DZR brass body (brass or chrome plated). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2109340
Size:
SEE MODEL
Marking:
SCE Technology logo (an eagle), CR and flow arrow on body. SCE Technology logo (an eagle), 1254-2 and size on nut for compression models.
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
S0234L-1 – 15mm compression x 15mm compression S0234L-2 - 22mm compression x 22mm compression S0234L-3 – 28mm compression x 28mm compression S0234MF-15 – ½” BSP (M) x ½” BSP (F)

Approval Holder:
SCE Technology (Ningbo) Co., Ltd
Company Name
SCE Technology (Ningbo) Co., Ltd
Address
No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Ningbo Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
SCE Technology (Ningbo) Co., Ltd
Company Name
SCE Technology (Ningbo) Co., Ltd
Address
No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Ningbo Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2109332

Non-verifiable double check valve assemblies with DZR brass bodies (chrome plated), incorporating two spring loaded, resilient trim in-line check valve cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2109332
Size:
14.7mm compression.
Marking:
IDC logo (~E~ within a circle), flow arrow, CR and size etched on body
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
ICVB005

Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou
Country
Zhejiang,
General Email

View All Listings by this Company

Print This Approval


#2109336

Range of inline non verifiable double check valve assemblies with DZR brass bodies. Model S0270L-1 incorporates an isolation valve and is chrome plated. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2109336
Size:
S0235L-1 15mm compression S0235L-2 22mm compression S0270L-1 15mm compression December new model: S0235L-3 28mm compression
Marking:
SCE Technologhy logo (an eagle) Size, Flow arrow, CR on body.
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
S0235L-1 15mm S0235L-2 22mm S0270L-1 15mm with isolating valve December new model added S0235L-3 28mm compression

Approval Holder:
SCE Technology (Ningbo) Co., Ltd
Company Name
SCE Technology (Ningbo) Co., Ltd
Address
No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Ningbo Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
SCE Technology (Ningbo) Co., Ltd
Company Name
SCE Technology (Ningbo) Co., Ltd
Address
No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Ningbo Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2105322

‘Calomax Eclipse’ range of electrically heated counter top or wall mounted catering water boilers. The boilers incorporate a stainless steel cold water feed cistern which has a combined vent/overflow fitted with an insect screen. The water to the cistern is supplied via a solenoid valve which incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The water level is electronically controlled via level sensors. The water is dispensed via a manually operated brass bodied (chrome plated)/stainless steel bodied self-closing tap(s) or a push button controlling a solenoid valve prior to the outlet. The counter top models are supplied with a PVC coated flexible inlet hose (¾” BSP (F) x 15mm standpipe) and a push fit adaptor (15mm push fit x ¾ BSP (F)). Maximum working pressure 10.0 bar (to the solenoid valve). Maximum temperature of dispsensed water 90°C for PB3C10 & PB3W5 models and 97°C for all other models. Cold water supply only.

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
2105322
Note:
R150 does not apply to models with a capacity of 15 litres or less (models 2W3, 3W5, PB3W5, 3W7.5, 3W10 & 3C5C).
Size:
¾” BSP (M) (to solenoid valve)
Marking:
Calomax, model code, serial number and technical information on adhesive label body.
Installation Requirements:
R001 R040 R150
Expiry date:
31/05/2026
Proviso:
Where the overflow is directed away from the appliance for connection to a drain, this discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:
Counter top models dispensing tap: 3C5C (5 litres rapid draw off). 3C10 (10 litres rapid draw off). Counter top models dispensing high tap: HT3C10 (10 litres rapid draw off). HT3C20 (20 litres rapid draw off). HT6C20 (20 litres rapid draw off). Counter top models push button: PB3C10 (10 litres rapid draw off). Wall mounted models Dispensing tap: 2W3 (3 litres rapid draw off). 3W5 (5 litres rapid draw off). 3W7.5 (7.5 litres rapid draw off). 3W10 (10 litres rapid draw off). 3W15C (15 litres rapid draw off). Wall mounted models Push button: PB3W5 (5 litres rapid draw off).

Approval Holder:
Calomax Ltd
Company Name
Calomax Ltd
Address
Lupton Avenue Leeds
Postcode
LS9 7DD
Country
United Kingdom
Phone
0113 2496681
General Email
sales@calomax.co.uk

View All Listings by this Company
Manufacturer:
Calomax Ltd
Company Name
Calomax Ltd
Address
Lupton Avenue Leeds
Postcode
LS9 7DD
Country
United Kingdom
Phone
0113 2496681
General Email
sales@calomax.co.uk

View All Listings by this Company

Print This Approval


#2109041

Range of single hole, single outlet (fixed spout with a swivel nozzle) over the rim bidet combination tap assemblies (various finishes). The taps incorporate quarter turn ceramic disc headwork with cross top or lever type operating members. The spout outlets have a plastic aerator and the products are supplied with a lever type pop-up waste. Maximum working pressure 5.0 bar Maximum operating temperature 60°C

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
2109041
Size:
PET braided, TpSiv lined flexible hose assembly with ½” BSP captive nut.
Marking:
Booth & Co. (brand of Vado) on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2026
Model:
BC-AXB-110-CP BC-AXB-110-BN BC-AXB-210-CP BC-AXB-210-BN

Approval Holder:
VADO
Company Name
VADO
Address
Cheddar Business Park Wedmore Road Cheddar Somerset
Postcode
BS27 3EB
Country
United Kingdom
Phone
01934 745895
General Email
tom.ross@vado.com

View All Listings by this Company
Manufacturer:
VADO
Company Name
VADO
Address
Cheddar Business Park Wedmore Road Cheddar Somerset
Postcode
BS27 3EB
Country
United Kingdom
Phone
01934 745895
General Email
tom.ross@vado.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 40 of 1042

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.