Bias chamber incorporating an EPDM diaphragm and ‘O’-ring with a brass body. Maximum working pressure 35.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

7/8-14 UNF male

Marking:

Technolog & product info on label.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

CGF03S06

Product Images

Manufacturer:

Technolog Limited

Company Name

Technolog Limited

Address

Ravenstor Road Wirksworth

Postcode

DE4 4FY

Country

United Kingdom

Phone

01629 823611

View All Listings by this Company

Range of Fastec® F13 and Fastec® F14 fittings for use with Fastec® manifold assemblies, incorporated with brass bodies and EPDM O-rings. To be used with copper pipe complying with BS EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Teco logo etched on body; F13 or F14, Year and batch/month No. (YYMM) on body

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

Fastec® F13 Elbow DN2105503 F13 Fastec fitting 90° M/F DN15 DN2105504 F13 Fastec fitting 90° F/F DN15 Tee DN2105507 F13 Fastec fitting M/F/F DN15 DN2105508 F13 Fastec fitting F/F/F DN15 2 way DN2105510 F13F Fastec splitter DN15 Straight DN2105531 F13 Fastec nipple M/M DN15 DN2105691 F13 Fastec cap Kit DN15 DN2208098 Fastec cap F13F DN15 DN2208080 Fastec fitting F13F DN15 DN2208081 Fastec Fitting extender F13F DN15 Fastec® F14 Elbow DN2208065 F14 Fastec Fitting 90° MF DN20 DN2208066 F14 Fastec Fitting 90° FF DN20 Tee DN2208067 F14 Fastec Fitting 90° MFF DN20 DN2208069 F14 Fastec Fitting 90° FFF DN20 Straight DN2410738 Fastec Fitting extender F14F DN20 DN2410737 Fastec Fitting F14F DN20 DN2208085 Fastec nipple F14M DN20 DN2208099 Fastec cap F14F DN20 DN2208087 Plug fastec F14M DN20 DN2208094 Fastec fitting F13M/F14M DN15

Product Images

Manufacturer:

TECO Srl

Company Name

TECO Srl

Address

Via Sandro Pertini n.39/41 25050 Provaglio d'Iseo (BS)

Country

Italy

View All Listings by this Company

Range of flexible joints incorporating an EPDM (inner & outer) joint with a steel reinforcing ring and two carbon steel flanges. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Size:

DN32 - DN150 flange

Marking:

DST Group on adhesive label on body DN, PN & YY/MM etched on body

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

PF16W032 PF16W040 PF16W050 PF16W065 PF16W080 PF16W100 PF16W125 PF16W150

Approval Holder:

DST Group Ltd

Company Name

DST Group Ltd

Address

Piksa House 2 Penrod Way Heysham Lancashire

Postcode

LA3 2UZ

Phone

01524 389 494

View All Listings by this Company

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Pegler 62 WHA on adhesive label on body Pegler logo, temperature and pressure cast on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

PEG62

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

‘UPM10’ and ‘UPM20’ range of circulator pumps with a stainless-steel body, plastic impellor and EPDM ‘O’-rings. The product is supplied with EPDM gaskets for the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241207701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M) inlet/outlet.

Marking:

Grundfos and Grundfos logo, type and model on nameplate on motor housing. P/N no., P/C no., Serial (S/N) no., technical info, manufacturing country and data matrix on end of motor housing. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

UPM 10M 25-95 N 180, UPM 10L 25-105 N 180, UPM 10XL 25-125 N 180, UPM 20S 25-145 N 180. Where: Pump type: UPM 10M, UPM 10L, UPM 10XL, UPM 20S. Control variant: []: PWM, LIN: LIN bus input signal, 0-10V, AUTO, HYBRID, SOLAR, DHW. Nominal diameter: 25: G 1½”. Max. Head: 95: 9.5m, 105: 10.5m, 125: 12.5m, 145: 14.5m. Designation/Pump housing: N 180: Stainless steel body, 180mm port to port length. Control box orientation: 3: 3 o’clock (right), 6: 6 o’clock (below), 9: 9 o’clock (left). Customer code: XXX (no impact on water contact parts).

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company