Directory Search Results

Print List

#2106555

'Würth Adhesivo PVC Tixpro'. Translucent, colourless (un-pigmented) solvent cement. Apply as per manufacturer's instructions. Cure for 24 hours at 23°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
30/06/2026

Approval Holder:
Wurth Espana S.A.
Company Name
Wurth Espana S.A.
Address
Calle Joiers, 21, Pol. Ind. Riera de Caldes, 08184 Palau-solita I Plegmans, Barcelona
Country
Spain

View All Listings by this Company

Print This Approval


#2110031

Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (brushed stainless steel). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. The products are supplied with plastic backnuts and a stainless steel braided PEX lined flexible hose assembly for installation between the tap and the solenoid valve. The HK-Rib model is supplied with a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2110031
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½ captive nut end connection.
Marking:
Fastdry (trademark of Hokwang Industries Co., Ltd.) on spout.
Installation Requirements:
R001 R006 R007 R009
Expiry date:
31/10/2026
Model:
ECOTAP-D FA01, ECOTAP-D FA02, ECOTAP-D FA03, HK-Rib.
Product Images

Approval Holder:
Hokwang Industries Co., Ltd.
Company Name
Hokwang Industries Co., Ltd.
Address
131 Dingping Rd., Ruifang District, New Taipei City, 22452
Country
Taiwan
Phone
+886-2-2496-6425
General Email
hokwang@hokwang.com

View All Listings by this Company
Manufacturer:
Hokwang Industries Co., Ltd.
Company Name
Hokwang Industries Co., Ltd.
Address
131 Dingping Rd., Ruifang District, New Taipei City, 22452
Country
Taiwan
Phone
+886-2-2496-6425
General Email
hokwang@hokwang.com

View All Listings by this Company

Print This Approval


#2110032

Range of wall mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (brushed stainless steel). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. The products are supplied with plastic backnuts and a stainless steel braided PEX lined flexible hose assembly for installation between the tap and the solenoid valve. The HK-Cha models added September are also supplied with a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2110032
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½ captive nut end connection.
Marking:
Fastdry (trademark of Hokwang Industries Co., Ltd.) on spout
Installation Requirements:
R001 R007 R009 R040
Expiry date:
31/10/2026
Model:
ECOTAP-W FA01, ECOTAP-W FA02, InnoWash FA. Models added Sept 2022: HK-Cha, HK-Cha Shorter Ver..
Product Images

Approval Holder:
Hokwang Industries Co., Ltd.
Company Name
Hokwang Industries Co., Ltd.
Address
131 Dingping Rd., Ruifang District, New Taipei City, 22452
Country
Taiwan
Phone
+886-2-2496-6425
General Email
hokwang@hokwang.com

View All Listings by this Company
Manufacturer:
Hokwang Industries Co., Ltd.
Company Name
Hokwang Industries Co., Ltd.
Address
131 Dingping Rd., Ruifang District, New Taipei City, 22452
Country
Taiwan
Phone
+886-2-2496-6425
General Email
hokwang@hokwang.com

View All Listings by this Company

Print This Approval


#2112063

Single-hole, single outlet, swivel electronically controlled tap assembly with a brass body in various finishes (see model). Flow is controlled by a solenoid valve activated via an infra-red sensor and a ceramic cartridge with a single lever operating member controlling both the flow and temperature. The spout outlet incorporates a pull-out spray with a plastic aerator. The inlets incorporate approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2), and a stainless-steel strainer Maximum working pressure 5 bar. Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2112063
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection attached to check valve bodies with 1/2" BSP female inlets
Marking:
Clearwater on tap body
Installation Requirements:
R001 R009 R090
Expiry date:
31/12/2026
Model:
AML10CP, AML10BN, AML10MB & AML10BB COMBINATION TAP ASSEMBLIES
Product Images

Approval Holder:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955

View All Listings by this Company

Print This Approval


#2111381

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111381
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom
General Email
Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 382 of 699

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.