Range of press fit fittings incorporating copper (GP5 models) or bronze (GP4 models) bodies and EPDM `O`-rings, for use with copper tube to EN 1057. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106017

Marking:

Taizhou Double Winner logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

GP5002 Bend 90: 12 - 54mm. GP5001 Bend 90 i/a: 12 - 54mm. GP5041 Bend 45: 12 - 54mm. GP5040 Bend 45 i/a: 12 - 54mm. GP5270 Straight Coupling: 12 - 54mm. GP5271 Straight Coupling: 12 - 54mm. GP5270S Sleeve Coupling: 12 - 54mm. GP5240 Reducing Coupling: 12 - 54mm. GP5243 Fitting Reducer: 12 - 54mm. GP5130 Equal Tee: 12 - 54mm. GP5301 Cap End: 12 - 54mm. GP5130 Reducing Tee: 12 - 54mm. GP5085 Full Crossover: 15 - 22mm. GP5086 Part Crossover: 15 - 22mm. GP4090 Elbow 90 Female: 15mm x 1/2” BSP (F) - 54mm x 2” BSP (F). GP4471 Wallplate Elbow: 15mm x 1/2” BSP (M) - 22mm x 3/4” BSP (M) GP4092 Elbow 90 Male: 15mm x 1/2” BSP (M) - 54mm x 2” BSP (M). GP4355 Tap Connector: 15mm x 1/2” BSP Captive Nut - 28mm x 1 1/4” BSP Captive Nut. GP4270 Female Adaptor: 15mm x 1/2” BSP (F) - 54mm x 2” BSP (F). GP4243 Male Adaptor: 15mm x 1/2” BSP (M) - 54mm (Crimp Joint) x 2” BSP (M). GP4130 Threaded Tee: 15mm x 1/2” BSP (M) x 15mm - 54mm x 1/2” BSP (M) x 54mm. GP4331 Straight Union: 15mm x 1/2” BSP (M) - 28mm x 1” BSP (M). GP4281 Female Adaptor: 15mm x 1/2” BSP (F) - 22mm x 3/4” BSP (F).

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

#2‐902, Z Center, No. 185 Wenxue Road, Jiaojiang, Taizhou, 31800, Zhejiang, China

View All Listings by this Company

Unidelta range of compression fittings with polypropylene bodies with EPDM ‘O’ rings for use with PE100 polyethylene pipe (manufactured to EN12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2111701

Note:

For above and below ground use

Size:

20mm, 25mm, 32mm, 40mm, 50mm, 63mm

Marking:

Unidelta, pressure rating & size on the compression nut

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

Straight coupler (1001) Reducing coupler (1002) Male adapter (1003) Female adapter (1004) 90° Tee (1005) 90° Elbow (1006) 90° Tee with female threaded take off (1007) 90° Elbow with threaded male take off (1008) 90° Elbow with threaded female take off (1009) 90° Tee with threaded male take off (1010) End plug (1012) 90° reducing tee (1013) Repair slip coupler (1014) Female tee with peg fitting (1012) 90° Elbow with lateral thread take off (1023) 90° Tee with increased take off (1029) Wall plate elbow (1034)

Approval Holder:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Manufacturer:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Range of single and dual flush WC outlet valves with ABS body and EPDM seating washers. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2106317

Size:

2” BSP (M)

Marking:

Geberit & Type printed on body.

Installation Requirements:

R001 R571

Expiry date:

30/06/2026

Model:

Geberit Type 290

Product Images

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Dual flush WC outlet valve with ABS body and EPDM seating washers. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2106318

Size:

2” BSP (M)

Marking:

Geberit & Type on body.

Installation Requirements:

R001 R571

Expiry date:

30/06/2026

Model:

Geberit Type 240

Product Images

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Range of flow meters incorporating black epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

See model

Marking:

GWF, Nominal diameter, year of manufacture (YYYY), temp class, install conditions, max pressure, type edge (meter type) manufacturer & other technical information on data label on meter housing

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

Sonico Edge Range Available in the following sizes: Inlet 50mm Length 200mm, 270mm & 300mm Inlet 65mm Length 200mm & 300mm Inlet 80mm Length 200mm, 225mm, 300mm, 350mm, 370mm & 413mm Inlet 100mm Length 250mm, 350mm, 360mm, 370mm & 483mm Inlet 125mm Length 250mm Inlet 150mm Length 300mm & 500mm

Product Images

Approval Holder:

GWF AG

Company Name

GWF AG

Address

Obergrundstrasse 119 Lucerne

Postcode

6005

Country

Switzerland

Phone

+41 41 319 51 77

General Email

moritz.roettger@gwf.ch

View All Listings by this Company