'SikaTop®-107 Seal AE'. Site applied, grey coloured, two-part coating. Mix parts A and B in a 1.4 weight ratio and apply as per manufacturer's Method Statement 'V1', dated 'Feb 2025'. Cure Coat 1 for 3 hours at 30°C. Cure Coat 2 for 21 days at 30°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5038 Coatings, Paints & Linings

Section Subtitle:

Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

250155062

Expiry date:

31/01/2030

Approval Holder:

Sika UAE L.L.C

Company Name

Sika UAE L.L.C

Address

P O Box 126212, Saih Shuaib 4 (533), Dubai Industrial City (DIC), Plot 61 (533-279), Dubai

Country

United Arab Emirates

Phone

+971 4 439 8200

General Email

sika.uae@ae.sika.com

View All Listings by this Company

'KLINGERSIL® C-4430'. NBR/fibre gasket material, which is green coloured one side and white coloured the other, manufactured by calandering. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

250155028

Expiry date:

31/01/2030

Approval Holder:

Rich. Klinger Dichtungstechnik GmbH & Co. KG

Company Name

Rich. Klinger Dichtungstechnik GmbH & Co. KG

Address

Am Kanal 8-10, A - 2352 Gumpoldskirchen

Country

Austria

Phone

+43 (0)2252-62599-137 Fax: +43 2252 62599-296

View All Listings by this Company

'MS Schramberg Sintered Strontium Ferrite (10-1173001)'. Grey coloured Sintered Strontium Ferrite ring component. For use with water up to 85°C.

Section:

5165 Magnetic Material

Expiry date:

28/02/2030

Approval Holder:

MS Schramberg GmbH & Co. KG

Company Name

MS Schramberg GmbH & Co. KG

Address

Max-Planck-Str. 15, 78713 Schramberg

Country

Germany

View All Listings by this Company

'Hylon N1040 H2 BK397 W & Hylon N1030 H2 BK397 W'. Black coloured, injection moulded, glass fibre filled polyamide materials. For use with water up to 60°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250355010

Expiry date:

31/03/2030

Approval Holder:

Ravago Italia Spa

Company Name

Ravago Italia Spa

Address

Via Baraccone N.5 24050, Mornico AI (BG)

Country

Italy

Phone

+35 844484

View All Listings by this Company

'27GFT'. Natural (appears white), extruded PA66+30GF material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

241255052

Expiry date:

31/12/2029

Approval Holder:

Henan Shenma Huawei Plastic Co., Ltd.

Company Name

Henan Shenma Huawei Plastic Co., Ltd.

Address

207, Building 7, Nylon Deep Processing Industrial Park, Ye County, Henan Province

Country

China

View All Listings by this Company