Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #241002722

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002722
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: P 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. P 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. P 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. P 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Foras (Brand of Pentax), model code and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: P range: P X(S) - XX/Y (T) Where: P = pump model X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. P 3S models: P 3S-50/2; P 3S-70/3; P 3S-90/4; P 3S-100/5; P 3S-120/6; P 3S-150/7. P 5S models: P 5S-70/2; P 5S-80/3; P 5S-120/4; P 5S-150/5; P 5S-180/6; P 5S-200/7. P 7S models: P 7S-100/2; P 7S-120/3; P 7S-180/4; P 7S-250/5; P 7S-300/6. P 9S models: P 9S-100/2; P 9S-150/3; P 9S-200/4; P 9S-250/5. P 3S models: P 3S-50/2 T; P 3S-70/3 T; P 3S-90/4 T; P 3S-100/5 T; P 3S-120/6 T; P 3S-150/7 T. P 5S models: P 5S-70/2 T; P 5S-80/3 T; P 5S-120/4 T; P 5S-150/5 T; P 5S-180/6 T; P 5S-200/7 T. P 7S models: P 7S-100/2 T; P 7S-120/3 T; P 7S-180/4 T; P 7S-250/5 T; P 7S-300/6 T; P 7S-350/7 T. P 9S models: P 9S-100/2 T; P 9S-150/3 T; P 9S-200/4 T; P 9S-250/5 T. P 18S models: P 18S-180/2 T; P 18S-250/3 T; P 18S-400/4 T.

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Country
Italy
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

WRAS Approval Number: #250702701

Range of cold-water supply booster sets, incorporating a stainless-steel manifold system and between 1 and 3 pumps. The booster sets also incorporate spherical valves, non-return valves (not suitable for backflow protection), pressure switches/sensors and expansion vessels. Maximum working pressure: 16.0 Bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250702701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Inlet: 1” BSP, 1 ¼” BSP, 1 ½” BSP, 2” BSP, 2 ½” BSP, 3” BSP & DN100 (flanged). Outlet: 1” BSP, 1 ¼” BSP, 1 ½” BSP, 2” BSP, 2 ½” BSP, 3” BSP, DN80 (flanged) & DN100 (flanged).
Marking:: LOWARA, Model name and product information on adhesive label on control panel
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Model:: SMB / VV / YYYYYYYYYYYY / W / XX / ZZZ SMB - Series of booster - Variable speed Drive SM VV- Number of pumps installed: 10=1 PUMP 20=2 PUMPS 30=3 PUMPS YYYYYYYYYYY -Type of pumps installed: from 1SVE up to 22SVE from 1HME up to 15HME W - Main voltage supply 4=3*400Vac 2=1*230Vac 3=3*230Vac XX - Option CP=free voltage contacts ZZZ - Option PMA=pressure switch on suction

Manufacturer:: Xylem Service Italia S.r.l

Company Name
Xylem Service Italia S.r.l
Address
Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza
Country
Italy
Phone
0039 0444 707111

View All Listings by this Company

WRAS Approval Number: #241102722

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241102722
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: ESPA, model & technical information on adhesive label on body.
Installation Requirements:: R001 R415
Expiry date:: 30/11/2029
Model:: MULTI VSXXX-XX-(1/2/C/D/2C/2D/C-D) -(F/N) -E 1. XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2. XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4. F/N: the materials of wetted parts --N，material is SUS 316. --F，material is SUS 304. 5. E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150

Approval Holder:: ESPA

Company Name
ESPA
Address
PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah
Country
United Arab Emirates

View All Listings by this Company

WRAS Approval Number: #241102723

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241102723
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: TPF on cover. TPF, model & technical information on data label on body.
Installation Requirements:: R001 R415
Expiry date:: 30/11/2029
Model:: TPVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2 ， On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 THM(-3)XX-XX\XX-SE 1. -3: different phase. -- -3: three phase，none: single phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、 16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Approval Holder:: TADMUR PUMP FACTORY WLL

Company Name
TADMUR PUMP FACTORY WLL
Address
P.O. BOX 212023 DOHA
Country
Qatar

View All Listings by this Company

WRAS Approval Number: #250702702

Range of cold-water supply booster sets, incorporating a stainless-steel manifold system and between 1 and 4 pumps depending on model. The booster sets also incorporate spherical valves and non-return valves. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250702702
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Manifold size is dependent on pump type and number of pumps, as shown below: Pump Type, No. of Pumps, Inlet Size, Outlet Size 1SV, 1, 1" BSP (M), 1" BSP (M) 1SV, 2, 2" BSP (M), 2" BSP (M) 1SV, 3, 2" BSP (M), 2" BSP (M) 1SV, 4, 2" BSP (M), 2" BSP (M) 3SV, 1, 1" BSP (M), 1" BSP (M) 3SV, 2, 2" BSP (M), 2" BSP (M) 3SV, 3, 2" BSP (M), 2" BSP (M) 3SV, 4, 2" BSP (M), 2" BSP (M) 5SV, 1, 1.1/4" BSP (M), 1.1/4" BSP (M) 5SV, 2, 2" BSP (M), 2" BSP (M) 5SV, 3, 2" BSP (M), 2" BSP (M) 5SV, 4, 2.1/2" BSP (M), 2.1/2" BSP (M) 10SV, 1, 1.1/2" BSP (M), 1.1/2" BSP (M) 10SV, 2, 2.1/2" BSP (M), 2.1/2" BSP (M) 10SV, 3, 3" BSP (M), 3" BSP (M) 10SV, 4, 3" BSP (M), 3" BSP (M) 15SV, 1, 2" BSP (M), 2" BSP (M) 15SV, 2, 3" BSP (M), 3" BSP (M) 15SV, 3, DN100 Flanged, DN100 Flanged 15SV, 4, DN125 Flanged, DN100 Flanged 1HM, 1, 1" BSP (M), 1" BSP (M) 1HM, 2, 2" BSP (M), 2" BSP (M) 1HM, 3, 2" BSP (M), 2" BSP (M) 1HM, 4, 2" BSP (M), 2" BSP (M) 3HM, 1, 1" BSP (M), 1" BSP (M) 3HM, 2, 2" BSP (M), 2" BSP (M) 3HM, 3, 2" BSP (M), 2" BSP (M) 3HM, 4, 2" BSP (M), 2" BSP (M) 5HM, 1, 1.1/4" BSP (M), 1" BSP (M) 5HM, 2, 2" BSP (M), 2" BSP (M) 5HM, 3, 2" BSP (M), 2" BSP (M) 5HM, 4, 2.1/2" BSP (M), 2.1/2" BSP (M) 10HM, 1, 1.1/2" BSP (M), 1.1/4" BSP (M) 10HM, 2, 2.1/2" BSP (M), 2.1/2" BSP (M) 10HM, 3, 2.1/2" BSP (M), 2.1/2" BSP (M) 10HM, 4, 3" BSP (M), 3" BSP (M) 15HM, 1, 2" BSP (M), 1.1/2" BSP (M) 15HM, 2, 3" BSP (M), 3" BSP (M) 15HM, 3, DN100 Flanged, DN80 Flanged 15HM, 4, DN100 Flanged, DN100 Flanged 22HM, 1, 2" BSP (M), 1.1/2" BSP (M) 22HM, 2, 3" BSP (M), 3" BSP (M) 22HM, 3, DN100 Flanged, DN100 Flanged 22HM, 4, DN125 Flanged, DN100 Flanged 22SV, 1, 2" BSP (M), 2" BSP (M) 22SV, 2, 3" BSP (M), 3" BSP (M) 22SV, 3, DN100 Flanged, DN100 Flanged 22SV, 4, DN125 Flanged, DN100 Flanged
Marking:: Lowara logo, Xylem services and model code on adhesive label on body
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Model:: Model Code: GHV VV / YYYYYYYYYYYY / W / XX / ZZZ GHV - Series of booster - Variable speed Drive EXM or HVL VV denotes the number of pumps installed, and can be replaced with any of the following: 10 = 1 Pump 20 = 2 Pumps 30 = 3 Pumps 40 = 4 Pumps YYYYYYYYYYYY denotes the type of pumps installed and can be replaced with any of the following: 1SV up to 22SV 1HM up to 22HM W denotes the main voltage supply and can be replaced with any of the following: 4=3*400Vac 2=1*230Vac 3=3*230Vac XX -denotes the option and can be replaced with: CP = free voltage contacts Blank = option not chosen ZZZ denotes the option for a pressure switch on suction and can be replaced with: PMA = pressure switch on suction Blank = option not chosen

Manufacturer:: Xylem Service Italia S.r.l

Company Name
Xylem Service Italia S.r.l
Address
Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza
Country
Italy
Phone
0039 0444 707111

View All Listings by this Company