Wall mounted spout outlet (chromium plated brass) incorporating a plastic aerator. Maximum operating temperature 60°C, open outlet use only.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2207003

Size:

½” BSP (M)

Marking:

Dornbracht on front of body

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

13801845 Lisse

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of brass spout outlets with various finishes (see model). The products incorporate plastic flow straighteners. Maximum operating temperature 60.0°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2207037

Note:

Open outlet use only. Product to be installed with rough kit V758-IS-XX but is not supplied with product.

Size:

½” BSP (M)

Marking:

Samuel Heath on spout escutcheon

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

V746-1F-XX V746-1K-XX V746-2F-XX V746-2K-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Product Images

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:

1000 Expansion Vessels

WRAS Approval Number:

2207054

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

Please refer to model.

Marking:

CIMM, model, capacity, maximum operating pressure and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

AFE CE (35, 50, 60, 80, 100 & 150 Litres) Vertical: 10.0 Bar, 100°C, 1” BSP (M). AFE CE (200, 300, 450 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). AFESB CE (50, 60, 80, 100 & 150 Litres) Horizontal: 10.0 Bar, 100°C, 1” BSP (M). AFESB CE (200, 300 & 500 Litres) Horizontal: 10.0 Bar, 100°C, 1 ¼” BSP (M). SOLAR (8, 12, 16, 18 & 24 Litres): 10.0 Bar, 100°C, ¾” BSP (M). CAR 19 (162ml): 20.0 Bar, 100°C, ½” BSP (M). STYLE (0.5, 1, 2 & 3 Litres): 16.0 Bar, 100°C, ½” BSP (M). STYLE (4 & 5 Litres): 10.0 Bar, 100°C, ½” BSP (M). STYLE CE (6, 7 & 8 Litres): 10.0 Bar, 100°C, ½” BSP (M). STYLE CE (12, 15, & 18 Litres): 10.0 Bar, 100°C, ¾” BSP (M). AFE/CAR CE (35, 50, 60, 80, 100 & 150 Litres) Vertical: 16.0 Bar, 100°C, 1” BSP (M). AFE/CAR CE (200 & 300 Litres) Vertical: 16.0 Bar, 100°C, 1 ¼” BSP (M). ACS (1 & 2 Litres): 10.0 Bar, 100°C, ½” BSP (M). ACS (3, 4 & 5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). ACS CE (8, 12 & 16 Litres): 10.0 Bar, 100°C, ¾” BSP (M). ACS CE (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M). AFC (3 & 5 Litres): 8.0 Bar, 70°C, ¾” BSP (M). AFC CE (8, 12, 16, 18 & 24 Litres): 8.0 Bar, 70°C, ¾” BSP (M). AFC/CAR CE (8, 12, 18 & 24 Litres): 16.0 Bar, 100°C, ¾” BSP (M). AFOSB CE (20 & 24 Litres) Horizontal: 8.0 Bar, 100°C, 1” BSP (M). AF CE 24 (24 Litres): 8.0 Bar, 70°C, 1” BSP (M). AS CE 24 (24 Litres): 10.0 Bar, 100°C, 1” BSP (M). Models added September 2022: AFE CE (300, 450 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). AFESB CE (300 & 500 Litres) Horizontal: 10.0 Bar, 100°C, 1 ¼” BSP (M). AFE/CAR CE (200 & 300 Litres) Vertical: 16.0 Bar, 100°C, 1 ¼” BSP (M).

Product Images

Approval Holder:

CIMM SpA

Company Name

CIMM SpA

Address

Via Caprera, 13 Castello di Godego (TV)

Postcode

31030

Country

Italy

Phone

0039 0423 760009

General Email

info@cimmspa.com

View All Listings by this Company

Manufacturer:

CIMM SpA

Company Name

CIMM SpA

Address

Via Caprera, 13 Castello di Godego (TV)

Postcode

31030

Country

Italy

Phone

0039 0423 760009

General Email

info@cimmspa.com

View All Listings by this Company

Range of tap outlets with plastic bodies incorporating a filter within the body, incorporating a hollow fibre filter membrane. The inlet of the filter incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The filters are supplied with (and must be used with) a chrome plated brass adapter which incorporates a pastic flow regulator. Maximum operating temperature 60°C.

Section:

1050 Filters and Housings

WRAS Approval Number:

2206333

Note:

Open outlet use only.

Size:

90-001861: M22 (M) 90-001862: M22 (F)

Marking:

T-Safe (brand of Johs. Tandrup A/S) on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2027

Model:

02-831401 Medical Tap Filter Fixed Position 31 Day. 02-831402 Medical Tap Filter Fixed Position 31 Day, Sterile. 02-831403 Medical Tap Filter Fixed Position 62 Day. 02-831404 Medical Tap Filter Fixed Position 62 Day, Sterile. 02-831405 Medical Tap Filter Fixed Position 92 Day. 02-831406 Medical Tap Filter Fixed Position 92 Day, Sterile. Filters are to be installed with 90-001861 Fixed Position Tap Adapter, Gasket seal & 90-001862 Fixed Position Tap Adapter, O-ring seal.

Product Images

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107337

Size:

See model

Marking:

CUPRO-FIT & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

PRESS FIT 90° Elbow: PFEL15, PFEL22, PFEL28, PFEL35, PFEL42, PFEL54 PRESS FIT 90° Street Elbow: PFELS15, PFELS22, PFELS28, PFELS35, PFELS42, PFELS54 PRESS FIT 45° Elbow: PFEL1545, PFEL2245, PFEL2845, PFEL3545, PFEL4245, PFEL5445 PRESS FIT 45° Street Elbow: PFELS1545, PFELS2245, PFELS2845, PFELS3545, PFELS4245, PFELS5445 PRESS FIT Full Crossover PFFCO15, PFFCO22, PFFCO28 PRESS FIT Part Crossover PFPCO15, PFPCO22. PFPCO28 PRESS FIT Coupler&Slip Coupler PFCO15, PFCO22, PFCO28, PFCO35, PFCO42, PFCO54 PFSC15, PFSC22, PFSC28, PFSC35, PFSC42, PFSC54 PRESS FIT Equal Tee PFTE15, PFTE22, PFTE28, PFTE35, PFTE42, PFTE54 PRESS FIT Reducing TEE PFTE151522, PFTE 221515, PFTE 221522 PFTE 222215, PFTE 222228, PFTE 281515 PFTE 281522, PFTE 282215, PFTE 282222 PFTE 282228, PFTE 282815, PFTE 282822 PFTE 282835, PFTE 352222, PFTE 352235 PFTE 352822, PFTE 352828, PFTE 352835 PFTE 353515, PFTE 353522, PFTE 353528 PFTE 402828, PFTE 423535, PFTE 422842 PFTE 423542, PFTE 424215, PFTE 424222 PFTE 424228, PFTE 424235, PFTE 545415 PFTE 545428, PFTE 545435, PFTE 544242 PFTE 545442 PRESS FIT Fitting Reducer FTGXC PFRE2215, PFRE 2815, PFRE 2822, PFRE 3515 PFRE 3522, PFRE 3528, PFRE 4215, PFRE 4222 PFRE 4228, PFRE 4235, PFRE 5415, PFRE 5422 PFRE 5428, PFRE 5435, PFRE 5442 PRESS FIT Reducer Coupler CXC PFRC2215, PFRC 2815, PFRC 2822, PFRC 3515 PFRC 3522, PFRC 3528, PFRC 4215, PFRC 4222 PFRC 4228, PFRC 4235, PFRC 5415, PFRC 5422 PFRC 5428, PFRC 5435, PFRC 5442 PRESS FIT End Cap PFEC15, PFEC22, PFEC28, PFEC35, PFEC42, PFEC54

Approval Holder:

Cubralco Ltd.

Company Name

Cubralco Ltd.

Address

Ricketts Close, Firs Industrial Estate, Kidderminster, Worcestershire

Postcode

DY11 7QN

View All Listings by this Company