Self-closing combination tap assembly (chromium plated brass) with a spring-loaded headwork controlling both temperature and flow with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The flexible hose inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240604001

Size:

Stainless steel or polyamide braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Inta on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2029

Model:

NC230CP

Product Images

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Manufacturer:

Idral S.p.A.

Company Name

Idral S.p.A.

Address

Via Isei, 8/10 - I-28010 Gargallo (NO)

Country

Italy

Phone

+39 0322 912017

General Email

View All Listings by this Company

Self-closing combination tap assembly (chromium plated brass) with a spring-loaded headwork controlling both temperature and flow with a dome type operating member. The spout outlet incorporates a plastic flow straightener. The flexible hose inlets incorporate a combined EPDM washer and stainless-steel strainer, as well as an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240604004

Size:

Stainless steel or polyamide braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

Twyford on operating member.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/06/2029

Model:

SF2104CP

Approval Holder:

Twyford Geberit Group

Company Name

Twyford Geberit Group

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926 516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Range of nylon braided (DG50X model series) or stainless steel braided (DG10X model series), PEX lined flexible hose assemblies with a variety of end connections (see models for full breakdown), including EPDM washers and ‘O’-rings where applicable. Some models are supplied with screwdriver operated isolation valves (see model list). All compression and push-fit fittings are to be used with copper pipe (manufactured to EN 1057). Maximum working pressure: 16 bar. Maximum operating temperature: 85°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240402029

Size:

See models below. Note: Comp = compression, PF = push-fit

Marking:

Fanski, WRAS and year of manufacture (YYYY) on ferrule

Installation Requirements:

R001 R008

Expiry date:

30/04/2029

Model:

DG50X-WRAS-200-L - 15mm comp x M10 short, DN8 DG10X-WRAS-400-L - 15mm comp x M10 short, DN8 DG50X-WRAS-201-L - 15mm comp x M12 short, DN8 DG10X-WRAS-401-L - 15mm comp x M12 short, DN8 DG50X-WRAS-202-L - ⅜” BSP (F) x 10mm comp, DN10 DG10X-WRAS-402-L - ⅜” BSP (F) x 10mm comp, DN10 DG50X-WRAS-203-L - ½” BSP (F) elbow x 15mm comp, DN10 DG10X-WRAS-403-L - ½” BSP (F) elbow x 15mm comp, DN10 DG50X-WRAS-204-L - ½” BSP (F) x ½” BSP (F), DN10 DG10X-WRAS-404-L - ½” BSP (F) x ½” BSP (F), DN10 DG50X-WRAS-205-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG10X-WRAS-405-L - ½” BSP (F) x 15mm comp iso valve, DN10 DG50X-WRAS-206-L - 15mm PF x 15mm PF iso valve, DN10 DG10X-WRAS-406-L - 15mm PF x 15mm PF iso valve, DN10 DG50X-WRAS-207-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG10X-WRAS-407-L - ¾” BSP (F) x 22mm comp iso valve, DN13 DG50X-WRAS-208-L - ¾” BSP (F) x 22mm comp, DN13 DG10X-WRAS-408-L - ¾” BSP (F) x 22mm comp, DN13 DG50X-WRAS-209-L - 22mm PF x 22mm PF iso valve, DN13 DG10X-WRAS-409-L - 22mm PF x 22mm PF iso valve, DN13 DG50X-WRAS-210-L - ⅜” BSP (F) x 15mm comp, DN10 DG10X-WRAS-410-L - ⅜” BSP (F) x 15mm comp, DN10 DG50X-WRAS-211-L - ½” BSP (F) x 15mm comp, DN10 DG10X-WRAS-411-L - ½” BSP (F) x 15mm comp, DN10 DG50X-WRAS-212-L - 10mm comp x 15mm comp, DN10 DG10X-WRAS-412-L - 10mm comp x 15mm comp, DN10 DG50X-WRAS-213-L - 15mm comp x 15mm comp, DN10 DG10X-WRAS-413-L - 15mm comp x 15mm comp, DN10 DG50X-WRAS-214-L - ¾” BSP (F) x 15mm comp, DN10 DG10X-WRAS-414-L - ¾” BSP (F) x 15mm comp, DN10 DG50X-WRAS-215-L - 15mm comp x 22mm comp, DN10 DG10X-WRAS-415-L - 15mm comp x 22mm comp, DN10 DG50X-WRAS-216-L - ½” BSP (F) x 22mm comp, DN10 DG10X-WRAS-416-L - ½” BSP (F) x 22mm comp, DN10 DG50X-WRAS-217-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG10X-WRAS-417-L - ¾” BSP (F) x 15mm comp iso valve, DN10 DG50X-WRAS-218-L - 15mm PF x M10x1 short, DN10 DG10X-WRAS-418-L - 15mm PF x M10x1 short, DN10 DG50X-WRAS-219-L - 15mm PF x M12x1 short, DN10 DG10X-WRAS-419-L - 15mm PF x M12x1 short, DN10 DG50X-WRAS-220-L - ¾” BSP (F) x 15mm PF, DN10 DG10X-WRAS-420-L - ¾” BSP (F) x 15mm PF, DN10 DG50X-WRAS-221-L - 15mm PF x ½” BSP (F) elbow, DN10 DG10X-WRAS-421-L - 15mm PF x ½” BSP (F) elbow, DN10 DG50X-WRAS-222-L - 15mm comp x 15mm PF, DN10 DG10X-WRAS-422-L - 15mm comp x 15mm PF, DN10 DG50X-WRAS-223-L - 15mm PF x 15mm PF, DN10 DG10X-WRAS-423-L - 15mm PF x 15mm PF, DN10 DG50X-WRAS-224-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG10X-WRAS-424-L - ¾” BSP (F) x ¾” BSP (F), DN13 DG50X-WRAS-225-L - 22mm comp x 22mm comp, DN13 DG10X-WRAS-425-L - 22mm comp x 22mm comp, DN13 DG50X-WRAS-226-L - 22mm PF x 22mm comp, DN13 DG10X-WRAS-426-L - 22mm PF x 22mm comp, DN13 DG50X-WRAS-227-L - 22mm PF x 22mm PF, DN13 DG10X-WRAS-427-L - 22mm PF x 22mm PF, DN13 DG50X-WRAS-228-L - ½” BSP (F) x M10 short, DN8 DG10X-WRAS-428-L - ½” BSP (F) x M10 short, DN8 DG50X-WRAS-229-L - ⅜” BSP (F) x M10 short, DN8 DG10X-WRAS-429-L - ⅜” BSP (F) x M10 short, DN8 DG50X-WRAS-230-L - 15mm comp x 15mm comp iso valve, DN10 DG10X-WRAS-430-L - 15mm comp x 15mm comp iso valve, DN10 DG50X-WRAS-231-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG10X-WRAS-431-L - ¾” BSP (F) x ¾” BSP (F) elbow, DN10 DG50X-WRAS-232-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG10X-WRAS-432-L - ⅜” BSP (F) X ⅜” BSP (F), DN8 DG50X-WRAS-233-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG10X-WRAS-433-L - ⅜” BSP (F) X ⅜” BSP (F) elbow, DN8 DG50X-WRAS-234-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG10X-WRAS-434-L - ⅜” BSP (F) x ¼" BSP (F), DN8 DG50X-WRAS-235-L - ½” BSP (F) x ½" BSP (M), DN13 DG10X-WRAS-435-L - ½” BSP (F) x ½" BSP (M), DN13 DG50X-WRAS-236-L - 15mm comp x ½” BSP (M), DN13 DG10X-WRAS-436-L - 15mm comp x ½” BSP (M), DN13 DG50X-WRAS-237-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG10X-WRAS-437-L - ¾” BSP (F) x ¾" BSP (M), DN13 DG50X-WRAS-238-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG10X-WRAS-438-L - ½” BSP (F) x ½” BSP (F) elbow, DN10 DG50X-WRAS-239-L - ½” BSP (F) x ½” BSP (M), DN8 DG10X-WRAS-439-L - ½” BSP (F) x ½” BSP (M), DN8 DG50X-WRAS-240-L - ½” BSP (F) x ½” BSP (F), DN8 DG10X-WRAS-440-L - ½” BSP (F) x ½” BSP (F), DN8 DG50X-WRAS-241-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG10X-WRAS-441-L - ½” BSP (F) x 15mm comp iso valve, DN13 DG50X-WRAS-242-L - ½” BSP (F) x ½” BSP (F), DN13 DG10X-WRAS-442-L - ½” BSP (F) x ½” BSP (F), DN13 DG50X-WRAS-243-L - ½” BSP (F) x 15mm comp, DN13 DG10X-WRAS-443-L - ½” BSP (F) x 15mm comp, DN13 DG50X-WRAS-244-L - 22mm comp x 22mm comp iso valve, DN13 DG10X-WRAS-444-L - 22mm comp x 22mm comp iso valve, DN13 DG50X-WRAS-245-L - 15mm comp x 15mm comp, DN13 DG10X-WRAS-445-L - 15mm comp x 15mm comp, DN13 DG50X-WRAS-246-L - 15mm comp x M12x1 short, DN10 DG10X-WRAS-446-L - 15mm comp x M12x1 short, DN10 DG50X-WRAS-247-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG10X-WRAS-447-L - ½” BSP (F) x 14.7mm comp iso valve, DN10 DG50X-WRAS-248-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG10X-WRAS-448-L - ¾” BSP (F) x 21mm comp iso valve, DN13 DG50X-WRAS-249-L - 15mm comp x M12x1 long, DN10 DG10X-WRAS-449-L - 15mm comp x M12x1 long, DN10 DG50X-WRAS-250-L - ½” BSP (F) x M12x1 short, DN8 DG10X-WRAS-450-L - ½” BSP (F) x M12x1 short, DN8 DG50X-WRAS-251-L - ½” BSP (F) x 15mm PF, DN10 DG10X-WRAS-451-L - ½” BSP (F) x 15mm PF, DN10 DG50X-WRAS-252-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG10X-WRAS-452-L - ½” BSP (F) x 15mm PF iso valve, DN10 DG50X-WRAS-253-L - ¾” BSP (F) x 22mm PF, DN13 DG10X-WRAS-453-L - ¾” BSP (F) x 22mm PF, DN13 DG50X-WRAS-254-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG10X-WRAS-454-L - ¾” BSP (F) x 22mm PF iso valve, DN13 DG50X-WRAS-255-L - ½” BSP (F) x 15mm PF, DN13 DG10X-WRAS-455-L - ½” BSP (F) x 15mm PF, DN13 DG50X-WRAS-256-L - ¾” BSP (F) x 15mm PF, DN13 DG10X-WRAS-456-L - ¾” BSP (F) x 15mm PF, DN13 DG50X-WRAS-257-L - ⅜” BSP (F) x M10x1 short, DN6 DG10X-WRAS-457-L - ⅜” BSP (F) x M10x1 short, DN6 DG50X-WRAS-258-L - ½” BSP (F) x M10x1 short, DN6 DG10X-WRAS-458-L - ½” BSP (F) x M10x1 short, DN6 DG50X-WRAS-259-L - ⅜” BSP (F) x M8x1 short, DN6 DG10X-WRAS-459-L - ⅜” BSP (F) x M8x1 short, DN6 DG50X-WRAS-260-L - ½” BSP (F) x M10x1 short, DN6 DG10X-WRAS-460-L - ½” BSP (F) x M10x1 short, DN6 DG50X-WRAS-261-L - ⅜” BSP (F) x M8x1 short, DN6 DG10X-WRAS-461-L - ⅜” BSP (F) x M8x1 short, DN6 DG50X-WRAS-262-L - ½” BSP (F) x 15mm PF, DN13 DG10X-WRAS-462-L - ½” BSP (F) x 15mm PF, DN13 DG50X-WRAS-263-L - ¾” BSP (F) x 15mm PF, DN13 DG10X-WRAS-463-L - ¾” BSP (F) x 15mm PF, DN13 DG50X-WRAS-264-L - M12x1 short x M8x1 short DG10X-WRAS-464-L - M12x1 short x M8x1 short DG50X-WRAS-265-L - M12x1 short x M8x1 short DG50X-WRAS-465-L - M12x1 short x M8x1 short DG50X-WRAS-266-L - F ½” BSP x 15mm push-fit iso valve DG50X-WRAS-466-L - F ½” BSP x 15mm push-fit iso valve Models added April 2025 DG10X-376-006-L, ½” BSP (F) x M8x1 short, DN6 DG10X-376-008-L, ½” BSP (F) x M8x1 short, DN8 DG50X-376-010-L, ½” BSP (F) x M8x1 short, DN6 DG50X-376-012-L, ½” BSP (F) x M8x1 short, DN8

Product Images

Approval Holder:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Manufacturer:

Fanski Group Inc

Company Name

Fanski Group Inc

Address

NO.7,SHENGYUAN ROAD,YUCHENG STREET, YUHUAN CITY,ZHEJIANG PROVINCE,CHINA 317600

Country

China

View All Listings by this Company

Range of stainless-steel interlocked shower hoses and shower hose extension pieces (smaller length versions) incorporating PE/EPDM and PEX inner tube materials. Available with various surface finishes and end connectors. For further details see model section. Maximum working pressure open outlet use. Maximum operating temperature 85.0°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240402049

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP captive nut. M15x1. All connection sizes can be used with every model of hose.

Marking:

CONST (trademark of Ningbo Jinxing Flexible Pipe Co., LTD), WRAS, KS & year of manufacture (YYYY)

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Model：KS-XXXXXXXX 1st X stands for out diameter: from 13mm to 17mm +/-0.3mm (PVC tube use size 14mm and 15mm) 2nd X stands for outer material: S=stainless steel, B=brass, P=PVC，(PVC outer tube only with PVC inside tube) 3rd X stands for the surface treatment: C=chrome plated, P=stainless steel natural color, B=black, S=sliver, G=Gold,/Gray 4th X stands for fittings material: B=brass, S=stainless steel, Z=Zinc Alloy P=ABS 5th X stands for fittings size and shape: 1/2’ 3/8’ M15x1, M16x1,(M15*1,M16*1 use brass material only use size 13mm and 14mm only) Fitting shape find the attached1. 6th X stands for hose nipple material: B=brass, S=stainless steel, P=POM, N=Nylon 7th X stands for inner tube material:, PVC, EPDM，PEX (EPDM,PEX, tube only use with stainless steel and brass out side) 8th X stands for hose length from 10cm to 300cm. 9th X stands for the fitting number end connection type), which can be a number from 1 to 29, or 51 to 72 with the prefix: Nut and suffix: #, (if different end connection types are used two numbers will be provided Size 1/2” 3/8” (only used for stainless steel outer material) Size M15*1 M16*1 ( use brass material only, use size 13mm and 14mm only) Limits: 1. Size 1/2”can use all fitting number except #51 2. Size 1/2” 3/8” can use #13 and #30， but they are only used for stainless steel outer material. 3. #30 is used for stainless steel outer material and surface treatment of stainless steel natural color Size M15*1 only use #51, M15*1,M16*1 use size 13mm and 14mm only 4. ABS is only used in fitting size of 1/2’ 5. Only 14mm diameter is used nipple materials of stainless steel，POM and Nylon；other diameter only used brass material 6. EPDM,TPE tube only use with stainless steel and brass out side Model code example: KS-17SCB1/2”1/2”SPEX150 Nut 4# & 16#. This gives a 17mm hose with stainless steel interlocked outer, chrome surface finish, brass fittings, ½” end connections at each end, stainless steel nipples, PEX hose inner, 150cm length, end connections type Nut number 4 and 16.

Product Images

Approval Holder:

Ningbo Jinxing Flexible Pipe Co.,LTD

Company Name

Ningbo Jinxing Flexible Pipe Co.,LTD

Address

No.1 Beixing RD , Mazhu Town, Yuyao City

Phone

62462608

General Email

sale@nbjinxing.com

View All Listings by this Company

Manufacturer:

Ningbo Jinxing Flexible Pipe Co.,LTD

Company Name

Ningbo Jinxing Flexible Pipe Co.,LTD

Address

No.1 Beixing RD , Mazhu Town, Yuyao City

Phone

62462608

General Email

sale@nbjinxing.com

View All Listings by this Company

Range of (grey or black) nylon or polyethylene braided flexible hose assemblies comprising of a multi-layered hose with a black HDPE outer layer and green PEX inner layer. End connections can incorporate an ‘O’-ring, a washer and/or a V-ring. Washers and ‘O’-rings are EPDM, the V-ring is silicone. Maximum operating temperature 60°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240202050

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Solex, WRAS & date of manufacture (MM/YY) on ferrule.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

H36 ANTI-TWIST Range: H36X0002S-01: Ø11mm quick connect inlet x ½” captive nut outlet, H36X0002S-02: Ø11mm quick connect inlet x M18*1.5” (F) outlet, H36X0002S-03: M15 (M) inlet x ½” captive nut outlet, H36X0002S-04: M15 (M) inlet x M15 (M) outlet, H36X0002S-05: Ø11mm quick connect inlet x M15 (F) outlet.

Product Images

Approval Holder:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company