Range of copper press fittings with EPDM seals for use with EN1057 copper tube. The joints are achieved by means of a press tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112371

Size:

see models

Marking:

Valtech on body

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

CPM05 Press 90°Bend C×C (12,15,22,28,35,42,54mm) CPM07 Press 90° Bend FTG×C(12,15,22,28,35,42,54mm) CPM08 Press 45° Bend C×C (12,15,22,28,35,42,54mm) CPM09 Press 45° Bend FTG×C (12,15,22,28,35,42,54mm) CPM10 Press Tee C×C×C (12,15,22,28,35,42,54mm) CPM11 Press ReducingTee C×C×C (15×15×12, 22×22×15, 22×22×12, 22×15×15, 22×15×22, 28×28×22, 28×28×15, 28×15×22, 28×22×22, 28×15×28, 28×22×28, 35×35×28, 35×35×22,35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42, 54×54×35, 54×54×28, 54×54×22) CPM12 Press Cap (12,15,22,28,35,42,54mm) CPM01 Press Coupling C×C (12,15,22,28,35,42,54mm) CPM04 Press Fitting Reducer Ftg×C (15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35, 54×28, 54×22) CPM03 Press Reducing Coupling C×C (15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35)

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of brass compression fittings for use with copper pipe only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

2110394

Size:

6mm -54mm

Marking:

TX88 and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

140 Straight Coupling C x C 15mm,22mm,28mm,35mm,42mm,54mm 140 Reduced Coupling C x C: 22 x 15mm, 28 x 15mm, 28 x 22mm, 35 x 28mm 141 Straight Coupling C x F: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 142 Straight Coupling C x M: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”, 28mm x 3/4”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 142 Straight Coupling C x MT: 15mm x 1/2”, 15mm x 3/4”, 22mm x 3/4”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 144 Elbow C x C: 15mm,22mm,28mm,35mm,42mm,54mm 144 Reduced Elbow C x C: 22 x 15mm 145 Elbow C x M: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 145 Elbow C x MT: 15mm x 1/2”, 22mm x 3/4”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 146 Elbow C x F: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 158X Backplate Elbow C x F: 15mm x 1/2”, 22mm x 1/2”, 22mm x 3/4” 150 Equal Tee C x C x C: 15mm,22mm,28mm,35mm,42mm,54mm 150R Reduced Tee C x C x C: 15 x 15 x 22mm, 22 x 15 x 15mm, 22 x 15 x 22mm, 22 x 22 x 15mm, 22 x 22 x 28mm, 28 x 15 x 28mm, 28 x 22 x 22mm, 28 x 28 x 15mm, 28 x 28 x 22mm, 35 x 35 x 15mm, 35 x 35 x 22mm, 35 x 35 x 28mm 154 Reduced Tee C x C x F: 15 x 15mm x 1/2”, 22 x 22mm x 1/2”, 22 x 22mm x 3/4” 154 Reduced Tee C x F x C: 15mm x 1/2” x 15mm, 22mm x 1/2” x 22mm, 22mm x 3/4” x 22mm 137 Stop End C: 15mm,22mm,28mm,35mm,42mm,54mm 1102/3/4 Reducing Set: 22 x 15mm, 28 x 15mm, 28 x 22mm, 35 x 22mm, 35 x 28mm, 42 x 28mm, 54 x 35mm, 54 x 22mm 1102/3/4 Reducing Set (1 part): 22 x 15mm, 28 x 15mm, 28 x 22mm 140D Straight Coupling C x C 15mm,22mm,28mm,35mm,42mm,54mm 140D Reduced Coupling C x C: 22 x 15mm, 28 x 22mm 141D Straight Coupling C x F: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”,28mm x 3/4”, 28mm x 1”, 28mm x 1-1/4”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 142D Straight Coupling C x M: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”, 28mm x 3/4”, 28mm x 1”, 28mm x 1-1/4”, 35mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 142D Straight Coupling C x MT: 15mm x 1/2”, 15mm x 3/4”, 22mm x 3/4”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 144D Reduced Elbow C x C: 22 x 15mm 145D Elbow C x M: 15mm x 1/2”, 15mm x 3/4”, 22mm x 1/2”, 22mm x 3/4”, 22mm x 1”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 146D Elbow C x F: 15mm x 1/2”, 15mm x 3/4”, 22mm x 3/4”, 22mm x 1”, 28mm x 1”, 35mm x 1-1/4”, 42mm x 1-1/2”, 54mm x 2” 158XD Backplate Elbow C x F: 15mm x 1/2”, 22mm x 3/4” 150D Equal Tee C x C x C: 15mm,22mm,28mm,35mm,42mm,54mm 150RD Reduced Tee C x C x C: 15 x 15 x 22mm, 22 x 15 x 15mm, 22 x 15 x 22mm, 22 x 22 x 15mm, 22 x 22 x 28mm, 28 x 15 x 28mm, 28 x 22 x 22mm, 28 x 28 x 15mm, 28 x 28 x 22mm, 35 x 35 x 15mm, 35 x 35 x 22mm, 35 x 35 x 28mm, 42 x 42 x 15mm, 42 x 42 x 22mm, 42 x 42 x 28mm ,54 x 54 x 15mm, 54 x 54 x 28mm 154D Reduced Tee C x C x F: 15 x 15mm x 1/2”, 22 x 22mm x 1/2”, 22 x 22mm x 3/4”, 28 x 28mm x 1/2”, 28 x 28mm x 3/4”, 28 x 28mm x 1” 137D Stop End C: 15mm,22mm,28mm,35mm,42mm,54mm 1102/3/4D Reducing Set: 22 x 15mm, 28 x 15mm, 28 x 22mm, 35 x 15mm, 35 x 22mm, 35 x 28mm, 42 x 15mm, 42 x 22mm, 42 x 28mm, 42 x 35mm, 54 x 15mm, 54 x 22mm, 54 x 28mm, 54 x 35mm, 54 x 42mm 1102/3/4D Reducing Set (1 part): 22 x 15mm, 28 x 15mm, 28 x 22mm 1103 Brass Olive: 15mm,22mm,28mm,35mm,42mm,54mm C1103 Copper Olive: 15mm,22mm,28mm,35mm,42mm,54mm

Approval Holder:

Purdon King (International) Ltd.

Company Name

Purdon King (International) Ltd.

Address

19/F, Tak Lee Commercial Building, 113-117 Wanchai Road, Wanchai

Country

Hong Kong

General Email

jonathan.lam@npking.com

View All Listings by this Company

Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112370

Size:

see models

Marking:

Valtech on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

CSF28 90°Elbow Close Ruff C×C (8,10,12,15,22,28,35,42,54mm) CSF29 90°Street Elbow Close Ruff Ftg×C (8,10,12,15,22,28,35,42,54mm) CSF38 Reducing 90° Elbow C×C ( 22×15, 28×22, 28×15) CSF30 45°Elbow C×C(8,10,12,15,22,28,35,42,54mm) CSF39 45°Elbow FTG×C(8,10,12,15,22,28,35,42,54mm) CSF31 Equal Tee C×C×C(8,10,12,15,22,28,35,42,54mm) CSF32 Reducing TEE C×C×C (15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15) CSF23 Equal Coupling C×C (8,10,12,15,22,28,35,42,54mm) CSF25 Reducing Coupling C×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF26 Fitting Reducer Ftg×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF27 Tube Cap (8,10,12,15,22,28,35,42,54mm) CSF33 Cross Over Coupling C×C(15,22mm) CSF40 Partial Cross Over Ftg×C (15,22mm) CSF34 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF35 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF07 90°Elbow Close Ruff C×C (6,8,10,12,15,22,28,35,42,54mm) CSF08 90°Street Elbow Close Ruff Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF41 Reducing 90° Elbow C×C (12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28) CSF10 45°Elbow C×C(6,8,10,12,15,22,28,35,42,54mm) CSF11 45°Elbow FTG×C(6,8,10,12,15,22,28,35,42,54mm) CSF42 90°Elbow Long Turn C×C 6,8,10,12,15,22,28,35,42,54mm) CSF43 90°Street Elbow Long Turn Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF13 Equal Tee C×C×C(6,8,10,12,15,22,28,35,42,54mm) CSF45 Reducing TEE C×C×C (6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12,15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22,22×15×15, 22×15×12,28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15,35×35×28, 35×35×22, 35×35×15,35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35,42×42×28, 42×42×22, 2x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22,54×54×15,54×42×54, 54×35×54) CSF01 Equal Coupling C×C (6,8,10,12,15,22,28,35,42,54mm) CSF04 Reducing Coupling C×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF05 Fitting Reducer Ftg×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15,28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF16 Tube Cap (6,8,10,12,15,22,28,35,42,54mm) CSF46 Return Bend C×C(6,8,10,12,15,22,28,35,42,54mm) CSF14 Cross Over Coupling C×C(15,22mm) CSF15 Partial Cross Over Ftg×C (15,22mm) CSF21 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF19 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”)

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of overhead shower outlets (chrome plated plastic bodies). Inlets incorporate a strainer. Maximum operating temperature 85°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2105326

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2026

Model:

707553 200mm Fixed Head Chrome Square

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Shower handset with plastic bodies (chrome plated). Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2110138

Note:

Open outlet use only

Size:

Handsets: ½" BSP (M). Overhead Showers: ½" BSP (F).

Marking:

DEVA on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

HANDSET P

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company