Directory Search Results

Print List

#2201345

Range of wall mounted, gas-fired, condensing combination boilers providing domestic hot water via a plate heat exchanger. The pressurised central heating system incorporates an expansion vessel and a pressure relief valve set at 3.0 bar. The inlets to the domestic hot water and primary circuits each have a screwdriver operated angled spherical valve. Both include a ½” BSP (M) connection for a filling link. The Greenstar CDi models only are supplied with an integral charging link (CAB device) verified by test (suitable for backflow protection against Fluid Category 3). Maximum working pressure of the primary circuit is 2.5 bar. Maximum working pressure of the secondary circuit is 10.0 bar. Maximum operating temperature of primary circuit is 82°C. Maximum operating temperature of secondary circuit is 60°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2201345
Size:
Secondary: 15mm compression. Primary: 22mm compression.
Marking:
Worcester and Wocester logo on front cover. Worcester, Worcester logo, model number, pressure, temperature and other technical information on data label inside boiler. (Worcester is a brand of Bosch).
Installation Requirements:
R001 R360
Expiry date:
31/01/2027
Proviso:
Greenstar CDi models: Supplied with a filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999. Greenstar Si models: Not supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.
Model:
7-733-600-056 Greenstar 36CDi Compact ErP, 7-733-600-059 Greenstar 36CDi Compact ErP LPG, 7-733-600-055 Greenstar 32CDi Compact ErP, 7-733-600-058 Greenstar 32CDi Compact ErP LPG, 7-733-600-054 Greenstar 28CDi Compact ErP, 7-733-600-057 Greenstar 28CDi Compact ErP LPG, 7-733-600-050 Greenstar 25Si Compact ErP, 7-733-600-051 Greenstar 25Si Compact ErP LPG, 7-733-600-052 Greenstar 30Si Compact ErP, 7-733-600-053 Greenstar 30Si Compact ErP LPG.
Product Images

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company

Print This Approval


#2204016

Range of commercial ice making machines with flow controlled via solenoid valve. Maximum working pressure 8 bar. Cold water use.

Section:
1500 Ice Making Machines
Size:
PVC lined flexible hose assembly with 3/4" BSP captive nut end connections
Marking:
Hoshizaki on front panel, Hoshizaki, model, product info on left side panel
Installation Requirements:
R001 R009 R150 R171 R511
Expiry date:
30/04/2027
Model:
FM-60KE-HC FM-60KE-HC-N FM-80KE-HC FM-80KE-HCN FM-120KE-HC FM-120KE-HCN FM-120KE-50-HC FM-120KE-50-HCN FM-150AKE-HC FM-150AKE-HCN FM-300AKE-HC FM-300AKE-HCN FM-480AKE-HC FM-480AKE-HCN FM-480AWKE-R452-SB FM-480AWKE-R452N-SB FM-600AKE-R452-SB FM-600AKE-R452N-SB FM-600AWKE-R452-SB FM-600AWKE-R452N-SB FM-750AKE-R452-SB FM-750AKE-R452N-SB FM-1000AKE-R452-SB FM-1000AKE-R452N-SB FM-1200ALKE-R452-SB FM-1200ALKE-R452N-SB FM-600ALKE-CO2-SB FM-600ALKE-CO2N-SB FM1200ALKE-CO2-SB FM-1200ALKE-CO2N-SB
Product Images

Approval Holder:
Hoshizaki Europe Ltd
Company Name
Hoshizaki Europe Ltd
Address
Telford 70 Stafford Park 7 Telford
Postcode
TF3 3BQ
Country
Shropshire

View All Listings by this Company
Manufacturer:
Hoshizaki Europe Ltd
Company Name
Hoshizaki Europe Ltd
Address
Telford 70 Stafford Park 7 Telford
Postcode
TF3 3BQ
Country
Shropshire

View All Listings by this Company

Print This Approval


#2203356

‘RSM’ range of ultrasonic water meters with blue epoxy coated ductile iron bodies, stainless steel transducer and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Size:
DN50 - DN200 flanged.
Marking:
RSM logo (‘Rsm’), Raphael Valves Industrial Ltd. name and address and logo, maximum pressure and temperature and other technical information on dial. Talis on dial lid. Size and flow arrow on body.
Installation Requirements:
R001 R008
Expiry date:
31/03/2027
Model:
RSM Ultrasonic Water Meter.
Product Images

Approval Holder:
Raphael Valves Industries Ltd
Company Name
Raphael Valves Industries Ltd
Address
Northern Industrial Zone Or Akiva POB 555 Israel
Country
30600

View All Listings by this Company
Manufacturer:
Raphael Valves Industries Ltd
Company Name
Raphael Valves Industries Ltd
Address
Northern Industrial Zone Or Akiva POB 555 Israel
Country
30600

View All Listings by this Company

Print This Approval


#2112357

Range of water meters with blue epoxy coated iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
Size:
see model
Marking:
JET, Wolseley & Company details, WRAS approved and other technical information on dial.
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
171260 & 171280 – DN50 171261 & 171281 – DN65 171262 & 171282 – DN80 171263 & 171283 – DN100 171264 & 171284 – DN125 171265 & 171285 – DN150 171266 & 171286 – DN200
Product Images

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#2203331

Permanent filling/ pressurisation device for primary heating and chilled water closed circuits in domestic and non-domestic premises. The mains and closed circuit system pressures are continuously checked by two pressure sensors and their differential monitored by microprocessors. In the event of a fall in system pressure, and only if the mains pressure is adequate, a solenoid valve operates to allow water into the system. At all other times a second solenoid valve drains the fill chamber to waste, via tundish (meeting the requirements of an air gap to drain), and allowing air to be admitted via an automatic air vent to create an atmospheric disconnection across the transfer chamber. Maximum working pressure 6.0 Bar. Cold water use only.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2203331
Note:
Suitable for backflow protection up to fluid category 3. Consult your water supplier prior to installation
Size:
½” BSP (M)
Marking:
Flamco on front case.
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
Flexfiller Direct G4.
Product Images

Approval Holder:
Flamco Limited
Company Name
Flamco Limited
Address
Washway Lane, St. Helens
Postcode
WA10 6PB
Phone
+44 (0) 1744 744 744
General Email
info@flamco.co.uk

View All Listings by this Company
Manufacturer:
Flamco Limited
Company Name
Flamco Limited
Address
Washway Lane, St. Helens
Postcode
WA10 6PB
Phone
+44 (0) 1744 744 744
General Email
info@flamco.co.uk

View All Listings by this Company

Print This Approval


#2203054

Range of multistage pumps with brass suction and discharge bodies, stainless steel housing, shaft and impeller, and EPDM ‘O’-rings and seals. Maximum working pressure: 6.0 bar (46553 - Stuart CH 4-30 & 46554 - Stuart CH 4-40 models) or 9.0 bar (46555 - Stuart CH 4-50 &46556 - Stuart CH 4-60 models). Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2203054
Size:
1¼” BSP (F) inlet x 1" BSP (F) outlet
Marking:
STUART TURNER, model number, maximum pressure and temperature and other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
31/03/2027
Model:
46553 - Stuart CH 4-30 46554 - Stuart CH 4-40 46555 - Stuart CH 4-50 46556 - Stuart CH 4-60
Product Images

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#2204310

Range of booster pumps with stainless steel bodies, plastic impellers, and NBR ‘O’-rings. The products incorporate a temperature sensor, pressure sensor, pressure vessel and a non-return valve integral to the pump chamber. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2204310
Size:
1” BSP (F)
Marking:
Cacheng, (Ningbo Cacheng Machinery & Electric Co.Ltd.) logo and model number other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
30/04/2027
Model:
Intelligent Water Booster Pump: CSBP370-25-A, (370W), 25m (Rated Head), CSBP550-24-A, (550W), 24m (Rated Head), CSBP750-30-A, (750W), 30m (Rated Head), CSBP550-22-Z-A (550W), 22m (Rated Head), CSBP750-28-Z-A (750W), 28m (Rated Head), CSBP850-30-A, (850W), 65m (Rated Head).
Product Images

Approval Holder:
Ningbo Cacheng Machinery & Electric Co., Ltd.
Company Name
Ningbo Cacheng Machinery & Electric Co., Ltd.
Address
17/F, King Hall, No. 1, Lane 42, Xingning Road, Ningbo
Country
China

View All Listings by this Company

Print This Approval


#2204014

Range of brushless DC centrifugal pumps with a plastic body. Maximum working pressure 1.0 Bar. Maximum operating temperature 70°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2204014
Size:
OD 22.9mm X OD 16.5mm
Marking:
TRITON and Triton logo on body. Brushless DC pump, CE and other technical info on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
30/04/2027
Model:
TL-C01-TA24-2411. TL-C01/5V-TA24-2411(-T-Wx04695).
Product Images

Approval Holder:
Triton Showers
Company Name
Triton Showers
Address
Triton Road, Nuneaton, Warwickshire
Postcode
CV11 4NR
Country
United Kingdom
Phone
02476 324423
General Email
paulrowley@tritonshowers.co.uk

View All Listings by this Company
Manufacturer:
Tops Industry and Technology Co. Ltd.
Company Name
Tops Industry and Technology Co. Ltd.
Address
No 519 International Innovation Park Zhenhua Road Yuhua District Changsha City Hunan Province
Country
China
General Email

View All Listings by this Company

Print This Approval


#2204020

Range of single and twin shower booster pumps with brass bodies, DZR brass impellers, NBR ‘O’-ring and EPDM seals. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2204020
Size:
Stainless-steel braided EPDM lined flexible hose assemblies with 22mm pushfit end connections
Marking:
Grundfos, model, pressure and temperature and other and technical information on adhesive label on electrical box. Grundfos on body.
Installation Requirements:
R001 R007 R415
Expiry date:
30/04/2027
Model:
Single and Twin ended positive head brass shower pumps: Grundfos STP-1.5 B - 1.5 bar twin ended shower pump, Grundfos SSP-2.0 B - 2.0 bar single ended shower pump, Grundfos STP-2.0 B - 2.0 bar twin ended shower pump, Grundfos SSP-3.0 B - 3.0 bar single ended shower pump, Grundfos STP-3.0 B - 3.0 bar twin ended shower pump, Grundfos STP-4.0 B - 4.0 bar twin ended shower pump.
Product Images

Approval Holder:
Grundfos Watermill Ltd.
Company Name
Grundfos Watermill Ltd.
Address
Enterprise Way Edenbridge
Postcode
TN8 6HF
Country
United Kingdom
Phone
01525 775425
General Email
rpeters@grundfos.com

View All Listings by this Company
Manufacturer:
Grundfos Watermill Ltd.
Company Name
Grundfos Watermill Ltd.
Address
Enterprise Way Edenbridge
Postcode
TN8 6HF
Country
United Kingdom
Phone
01525 775425
General Email
rpeters@grundfos.com

View All Listings by this Company

Print This Approval


#2201077

Ranges of overhead shower outlets with brass bodies, chrome plated plastic shower handsets, shower sets and shower kits. The shower sets comprise of a chrome plated plastic shower handset and shower hose. The shower kits comprise of a chrome plated plastic shower handset, brass wall elbow and either stainless steel interlocked, or PVC coated, shower hoses. The inlets of the shower handsets incorporate a plastic flow regulator at the inlet. Shower kits with ½” (M) inlets are also supplied with a brass wall elbow which incorporate a plastic flow regulator and an approved single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2201077
Note:
Open outlet use only.
Size:
Please refer to model.
Marking:
Ideal Standard, Armitage Shanks or Sottini (all brands of Ideal Standard (UK) Ltd.) on shower handset or overhead shower outlet.
Installation Requirements:
R001 R040
Expiry date:
31/01/2027
Model:
B9408AA Idealrain S1 shower kit with 80mm 1F handspray 600mm rail and 1.35m hose - ½” BSP (M) B9410AA Idealrain S3 shower kit with 80mm 3F handspray 600mm rail and 1.35m hose - ½” BSP (M) B9449AA Idealrain S1 shower set with 80mm 1F handspray and 1.35m hose - stainless steel interlock PVD coated, PVC lined flexible hoses with 1/2" BSP conical nuts B9450AA Idealrain S3 shower set with 80mm 3F handspray and 1.35m hose - stainless steel interlock PVD coated, PVC lined flexible hoses with 1/2" BSP conical nuts B9413AA Idealrain S1 shower kit with 100mm 1F handspray 600mm rail and 1.35 hose - ½” BSP (M) B9416AA Idealrain M3 shower kit with 100mm 3F handspray 600mm rail and 1.35 hose – ½” BSP (M) B9556AA Idealrain S3 shower kit with 80mm handspray, 900mm rail and 1.8m hose - ½” BSP (M) B9306AA Armaglide 2 - Shower kit with 1 function handset, 900mm rail and 1.75m hose - ½” BSP (M) B9307AA Armaglide 2 - Shower kit with 3 function handset, 900mm rail and 1.75m hose - ½” BSP (M) B9308AA Armaglide 2 - Shower set with 1 function handset and 1.75m hose - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9309AA Armaglide 2 - Shower set with 3 function handset and 1.75m hose - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9836AA – Idealrain Pro M3 Shower kit with 900mm rail, 3 function, 100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9829AA – Idealrain Pro S1 shower kit with 600mm rail, single function, 80mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9830AA – Idealrain Pro S3 shower kit with 600mm rail, 3 function, 80mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9833AA – Idealrain Pro M1 shower kit with 600mm rail, single function,100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9834AA – Idealrain Pro M3 shower kit with 600mm rail, 3 function, 100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9835AA – Idealrain Pro M1 shower kit with 900mm rail, single function 100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9841AA – Idealrain Pro S1 shower kit with handspray holder, single function, 80mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9843AA – Idealrain Pro M1 shower kit with handspray holder, single function,100mm dia handspray - flexible shower hose assembly comprising of a multi-layered hose with 1/2" BSP captive nuts B9489AA Idealrain M3 shower set, 100mm handspray, hose, & hose retaining ring - stainless steel interlock PVD coated, PVC lined flexible hoses with 1/2" BSP conical nuts B1038AA Borbera L3 Shower Kit - ½” BSP (M) B9400AA - IDEALRAIN S1 H/SPRAY 1F CHROME 80MM – ½” BSP (M) B9401AA - IDEALRAIN S3 H/SPRAY 3F CHROME 80MM – ½” BSP (M) B9403AA - IDEALRAIN M3 H/SPRAY 3F CHROME 100MM - ½” BSP (M) B9304AA -ARMAGLIDE 2 H/SPRAY 1F CHROME 80MM – ½” BSP (M) B9305AA - ARMAGLIDE 2 H/SPRAY 3F CHROME 80MM – ½” BSP (M) B1039AA-Borbera M1 Rainshower - 1/2" BSP (F)

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 329 of 1132

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.