‘Intergard 269 & Interline 975’. Site applied, white coloured Epoxy coating system comprising of a base coat and a topcoat. ‘Intergard 269’ is a two-component base coat which comprises of Part A (red/brown coloured) and Part B (straw coloured). Mix Part A & Part B in a mass ratio of 7.46:1 and apply as per manufacturer’s TDS ref. ‘206’, dated 08/02/2021. Cure for 12 days@25°C. ‘Interline 975’ is a two-component topcoat which comprises of Part A (white coloured) and Part B (straw coloured). Mix Part A & Part B in a mass ratio of 3.12:1 and apply as per manufacturer’s TDS ref. ‘3577’, dated 31/07/2017. Cure for 14 days@25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2201535

Expiry date:

31/01/2027

Approval Holder:

International Paint Ltd.

Company Name

International Paint Ltd.

Address

Stoneygate Lane, Felling, Tyne & Wear

Postcode

NE10 0JY

View All Listings by this Company

‘Ultramid® A3EG10 FC Aqua Black 23285’. Black coloured, injection moulded PA66 material. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2204508

Expiry date:

30/04/2027

Approval Holder:

BASF SE

Company Name

BASF SE

Address

Carl-Bosch-Str. 38, 67056 Ludwigshafen

Country

Germany

View All Listings by this Company

'Badadur PBT9 GF30 Natur S1' (appears cream in colour) and 'Badadur PBT9 GF30 grau 930a' (grey coloured). Natural or grey coloured, injection moulded, glass reinforced PBT materials. For use with water up to 85°C.

Section:

5205 Polybutylene Terephthalate

Expiry date:

30/04/2027

Approval Holder:

Bada AG

Company Name

Bada AG

Address

Untere Strut 1, D-77815 Bühl/Baden

Country

Germany

General Email

waldecker@bada.de

View All Listings by this Company

‘Ultrason® E 2010 G4 Uncoloured’. Beige coloured, injection moulded polyethersulphone material. For use with water up to 85°C.

Section:

5225 Polyethersulphone

Section Subtitle:

Material only. Components made from products listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2301500

Expiry date:

31/01/2028

Approval Holder:

BASF SE

Company Name

BASF SE

Address

Carl-Bosch-Str. 38, 67056 Ludwigshafen

Country

Germany

View All Listings by this Company

'Ultrason® E 2010 natur'. Light yellow coloured, injection moulded PES materials manufactured in Germany and South Korea. For use with water up to 85°C.

Section:

5225 Polyethersulphone

Section Subtitle:

Material only. Components made from products listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2210500

Expiry date:

31/10/2027

Approval Holder:

BASF SE

Company Name

BASF SE

Address

Carl-Bosch-Str. 38, 67056 Ludwigshafen

Country

Germany

View All Listings by this Company