Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2312081

Range of inline water conditioners with zinc/copper alloy bodies. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 80°C

Section:: 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:: Please refer to model
Marking:: Halcyan and WRAS on adhesive label on body.
Installation Requirements:: R001 R120 R150 R170 R290
Expiry date:: 31/12/2028
Model:: H2o5 1/2" BSPP Female Header H2o9-15 1/2" BSPP Female Header H2o9-22 3/4" BSPT Female Header H2o12 1/2" BSPP Female Header H2o18 3/4" BSPT Female Header H2o34 3/4" BSPT Female Header H2o56 1"" BSPT Female Header H2o70 2" BSPT Female Header H2o100 2" BSPT Female Header H2o220 2" BSPT Female Header H2o Personal 1/2" BSPP Female/Male Header H2o Leisure 3/4" BSPP Female/Male Header H2o335 65mm Table E Flange H2o500 80mm Table E Flange H2o900 100mm Table E Flange H2o350 2" BSPT Female Header

Approval Holder:: Halcyan Ltd

Company Name
Halcyan Ltd
Address
7 Zetland Road Bristol BS6 7AG

View All Listings by this Company

WRAS Approval Number: #2312364

“CN Pressure vessel” range incorporating a HDPE liner. The products have a separate outer layer (with black, blue, grey or natural finishes). The CN Pressure vessel 24x72” D-4 model has a top and bottom opening. Maximum operating pressure 10.5 bar. Cold water use only.

Section:: 2470 Water Softeners
Section Subtitle:: Components, pressure vessels.
WRAS Approval Number:: 2312364
Size:: Models ending 2.5”: 2½” BSP (F). Models ending 4”: 4” BSP (F).
Marking:: Canature and technical information (including maximum pressure) on adhesive label on body.
Installation Requirements:: R001 R008
Expiry date:: 31/12/2028
Model:: “CN Pressure vessel” range: CN Pressure vessel 05x13” Regular-2.5”, CN Pressure vessel 05x17” Regular-2.5”, CN Pressure vessel 05x20” Regular-2.5”. CN Pressure vessel 06x12” Regular-2.5”, CN Pressure vessel 06x15” Regular-2.5”, CN Pressure vessel 06x17” Regular-2.5”, CN Pressure vessel 06x18” Regular-2.5”, CN Pressure vessel 06x22” Regular-2.5”, CN Pressure vessel 06x30” Regular-2.5”, CN Pressure vessel 06x35” Regular-2.5”. CN Pressure vessel 07x13” Regular-2.5”, CN Pressure vessel 07x15” Regular-2.5”, CN Pressure vessel 07x17” Regular-2.5”, CN Pressure vessel 07x19” Regular-2.5”, CN Pressure vessel 07x22” Regular-2.5”, CN Pressure vessel 07x24” Regular-2.5”, CN Pressure vessel 07x30” Regular-2.5”, CN Pressure vessel 07x35” Regular-2.5”, CN Pressure vessel 07x44” Regular-2.5”. CN Pressure vessel 08x13” Regular-2.5”, CN Pressure vessel 08x15” Regular-2.5”, CN Pressure vessel 08x17” Regular-2.5”, CN Pressure vessel 08x18” Regular-2.5”, CN Pressure vessel 08x22” Regular-2.5”, CN Pressure vessel 08x24” Regular-2.5”, CN Pressure vessel 08x25” Regular-2.5”, CN Pressure vessel 08x26” Regular-2.5”, CN Pressure vessel 08x30” Regular-2.5”, CN Pressure vessel 08x35” Regular-2.5”, CN Pressure vessel 08x37” Regular-2.5”, CN Pressure vessel 08x40” Regular-2.5”, CN Pressure vessel 08x44” Regular-2.5”. CN Pressure vessel 09x13” Regular-2.5”, CN Pressure vessel 09x14” Regular-2.5”, CN Pressure vessel 09x15” Regular-2.5”, CN Pressure vessel 09x16” Regular-2.5”, CN Pressure vessel 09x17” Regular-2.5”, CN Pressure vessel 09x18” Regular-2.5”, CN Pressure vessel 09x22” Regular-2.5”, CN Pressure vessel 09x24” Regular-2.5”, CN Pressure vessel 09x26” Regular-2.5”, CN Pressure vessel 09x30” Regular-2.5”, CN Pressure vessel 09x35” Regular-2.5”, CN Pressure vessel 09x40” Regular-2.5”, CN Pressure vessel 09x42” Regular-2.5”, CN Pressure vessel 09x48” Regular-2.5”. CN Pressure vessel 10x13” Regular-2.5”, CN Pressure vessel 10x15” Regular-2.5”, CN Pressure vessel 10x16” Regular-2.5”, CN Pressure vessel 10x17” Regular-2.5”, CN Pressure vessel 10x18” Regular-2.5”, CN Pressure vessel 10x19” Regular-2.5”, CN Pressure vessel 10x24” Regular-2.5”, CN Pressure vessel 10x26” Regular-2.5”, CN Pressure vessel 10x30” Regular-2.5”, CN Pressure vessel 10x35” Regular-2.5”, CN Pressure vessel 10x36” Regular-2.5”, CN Pressure vessel 10x40” Regular-2.5”, CN Pressure vessel 10x44” Regular-2.5”, CN Pressure vessel 10x47” Regular-2.5”, CN Pressure vessel 10x54” Regular-2.5”. CN Pressure vessel 11x35” Regular-2.5”, CN Pressure vessel 11x44” Regular-2.5”. CN Pressure vessel 12x17” Regular-2.5”, CN Pressure vessel 12x17” Regular-4”, CN Pressure vessel 12x35” Regular-2.5”, CN Pressure vessel 12x36” Regular-2.5”, CN Pressure vessel 12x48” Regular-2.5”, CN Pressure vessel 12x48” Regular-4”, CN Pressure vessel 12x52” Regular-2.5”, CN Pressure vessel 12x52” Regular-4”. CN Pressure vessel 13x24” Regular-2.5”, CN Pressure vessel 13x24” Regular-4”, CN Pressure vessel 13x44” Regular-2.5”, CN Pressure vessel 13x44” Regular-4”, CN Pressure vessel 13x54” Regular-2.5”, CN Pressure vessel 13x54” Regular-4”. CN Pressure vessel 14x52” Regular-2.5”, CN Pressure vessel 14x52” Regular-4”, CN Pressure vessel 14x65” Regular-2.5”, CN Pressure vessel 14x65” Regular-4”. CN Pressure vessel 16x36” Regular-2.5”, CN Pressure vessel 16x36” Regular-4”, CN Pressure vessel 16x44” Regular-2.5”, CN Pressure vessel 16x44” Regular-4”, CN Pressure vessel 16x52” Regular-2.5”, CN Pressure vessel 16x52” Regular-4”, CN Pressure vessel 16x65” Regular-2.5”, CN Pressure vessel 16x65” Regular-4”. CN Pressure vessel 18x36” Regular-4”, CN Pressure vessel 18x53” Regular-4”, CN Pressure vessel 18x65” Regular-4”, CN Pressure vessel 21x53” Regular-4”, CN Pressure vessel 21x62” Regular-4”. CN Pressure vessel 24x72” Regular-4”, CN Pressure vessel 24x72” D-4”.

Approval Holder:: Canature Health Technology Group Co.,Ltd.

Company Name
Canature Health Technology Group Co.,Ltd.
Address
No.508 & 518, Chuanda Road, Pudong New Area, Shanghai City
Country
China

View All Listings by this Company

WRAS Approval Number: #2312541

'ABS-040 Black'. Black coloured, injection moulded ABS material. For use with water up to 85°C.

Section:: 5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)
Expiry date:: 31/12/2028

Approval Holder:: Fujian Xihe Sanitary Ware Technology Co., Ltd.

Company Name
Fujian Xihe Sanitary Ware Technology Co., Ltd.
Address
High-Tech Industrial Zone, Luncang Town, Nan'An City, Fujian 362304
Country
China
Phone
+86 0595-86186107

View All Listings by this Company

WRAS Approval Number: #2312531

'KH24R'. Black coloured, compression moulded Carbon ring which is impregnated with Phenolic Resin. For use with water up to 85°C.

Section:: 5022 Carbon
Expiry date:: 31/12/2028

Approval Holder:: Krishnaveni Carbon Products Private Limited

Company Name
Krishnaveni Carbon Products Private Limited
Address
63/3, Athipalayam Road, Chinnavedampatti, Coimbatore – 641049, Tamil Nadu
Country
India

View All Listings by this Company

WRAS Approval Number: #2312527

'Relithane 151. Factory applied, brown coloured, two-component Polyurethane coating. Mix base and hardener in a 2.5:1 ratio and apply as per manufacturer's 'Standard Operating Procedure & Guidelines, Revision 2, 157/2022' dated 12th October 2022. Cure for 40 seconds@35°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2312527
Expiry date:: 31/12/2028

Approval Holder:: Reliable Paints

Company Name
Reliable Paints
Address
55-A Alindra Extension, Manjusar Gidc, Vadodara, Gujarat, 391775
Country
India

View All Listings by this Company

WRAS Approval Number: #2312534

'AL 8423'. Factory applied, dark blue coloured enamel coating. Apply as per manufacturer's TDS '08423', version '02-2024' and cure for 7 minutes@860°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2312534
Expiry date:: 31/12/2028

Approval Holder:: Akcoat İleri Kimyasal Kaplama Malzemeleri San. ve Tic. A.Ş.

Company Name
Akcoat İleri Kimyasal Kaplama Malzemeleri San. ve Tic. A.Ş.
Address
Sakarya 2nd IZ, No:1, Street No:18 54300 Hendek, Sakarya
Country
Turkey

View All Listings by this Company

WRAS Approval Number: #2312539

'APCOSHIELD FBVL EX400G – RAL 5005 Blue & RAL 5017 Blue'. Factory applied, blue coloured epoxy coatings. Apply as per manufacturer’s datasheet ‘PDS/APPPG/V01/01-2024’. Post-cure for 15 minutes@200°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2312539
Expiry date:: 31/12/2028

Approval Holder:: Asian Paints PPG Pvt. Ltd.

Company Name
Asian Paints PPG Pvt. Ltd.

View All Listings by this Company

WRAS Approval Number: #2312540

'APCOSHIELD FBPC EX405SG INTER GREEN'. Factory applied, green coloured epoxy coating. Apply as per manufacturer's data sheet 'PDS/APPPG/V02/01-2024'. Post-cure for 15 minutes@200°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2312540
Expiry date:: 31/12/2028

Approval Holder:: Asian Paints PPG Pvt. Ltd.

Company Name
Asian Paints PPG Pvt. Ltd.

View All Listings by this Company

WRAS Approval Number: #240155005

'Jotun Marathon IQ2'. Factory applied, two-component, grey coloured epoxy coating. Mix parts A:B in a ratio of 3:1 parts and apply as per 'Jotun Marathon IQ2' Technical Data Sheet dated '16 April 2021'. Cure for 7 days@23°C. For use with water up to 40°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 240155005
Expiry date:: 31/01/2029

Approval Holder:: Guangzhou Yao Wei Decoration Engineering Co. Ltd

Company Name
Guangzhou Yao Wei Decoration Engineering Co. Ltd
Address
Room 313, No.28 Zhoumen North Road, Liwan District, Guangzhou
Country
China

View All Listings by this Company

WRAS Approval Number: #2312542

'G52-06 Quick-drying type Black High Chlorinated Polyethylene Anticorrosive Coating'. Factory applied, black coloured polyethylene coating. Apply as per manufacturer's data sheet 'XYJSMS002', dated January 10th, 2023. Cure for 24 hours@25°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 2312542
Expiry date:: 31/12/2028

Approval Holder:: Xinxing Hebei Metallurgy Resource Co., Ltd

Company Name
Xinxing Hebei Metallurgy Resource Co., Ltd
Address
Wu’an Industrial Zone of Xinxing Pipe, Handan City, Hebei Province 056300
Country
China

View All Listings by this Company