Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250255012

'Epigard Solvent Free Epoxy Finish'. Factory applied, two-component, red coloured epoxy coating. Mix base & accelerator in a volume ratio of 3:1 and apply as per user instructions dated '20th Dec 2024'. Cure for 24 hours@30°C. For use with water up to 23°C. This material is only approved for the curing and mixing conditions that appear on the approval. If the cure/mix conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5030 Coatings, Paints & Linings
Section Subtitle:: Factory applied pipe & fittings coatings.
WRAS Approval Number:: 250255012
Expiry date:: 28/02/2030

Approval Holder:: Shalimar Paints Limited

Company Name
Shalimar Paints Limited
Address
Nashik Mumbai NH Road, Gonde, Nashik, Maharashtra 422403
Country
India

View All Listings by this Company

WRAS Approval Number: #250155007

'DZT PANT I1000-NC; DZT PANT I10G05-NC; DZT PANT I10G10-NC; DZT PANT I10G15-NC; DZT PANT I10G20-NC; DZT PANT I10G25-NC; DZT PANT I10G30-NC; DZT PANT I10G35-NC; DZT PANT I10G40-NC; DZT PANT I10G45-NC; DZT PANT I10G50-NC; DZT PANT I10G55-NC; DZT PANT I10G60-NC; DZT PANT I10G65-NC (un-pigmented - appears beige)’. ‘DZT PANT I10G05-BK; DZT PANT I10G10-BK; DZT PANT I10G15-BK;DZT PANT I10G20-BK;DZT PANT I10G25-BK; DZT PANT I10G30-BK; DZT PANT I10G35-BK;DZT PANT I10G40-BK;DZT PANT I10G45-BK; DZT PANT I10G50-BK; DZT PANT I10G55-BK; DZT PANT I10G60-BK; DZT PANT I10G65-BK (black coloured)'. Injection moulded PA materials. For use with water up to 85°C.

Section:: 5180 Nylon
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 250155007
Expiry date:: 31/01/2030

Approval Holder:: Jiangmen De Zhong Tai Engineering Plastics Technology Co., Ltd.

Company Name
Jiangmen De Zhong Tai Engineering Plastics Technology Co., Ltd.
Address
3rd Building, East Gaoxin Road No. 33, Hi-Tech Zone, Jiangmen City, Guangdong Province
Country
China

View All Listings by this Company

WRAS Approval Number: #250555001

'KN133G30 (off-white in colour) & KN133G15BL (black coloured)'. Injection moulded PA6 materials. KN133G30 is for use with water up to 65°C. KN133G15BL is for use with water up to 23°C.

Section:: 5180 Nylon
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 250555001
Expiry date:: 31/05/2030

Approval Holder:: KOLON ENP, Inc.

Company Name
KOLON ENP, Inc.
Address
[39537] 64 Gongdan 3-gil, Gimcheon-si, Gyeongsangbuk-do
Country
Korea, Republic of

View All Listings by this Company

WRAS Approval Number: #241155011

'Revolve N-307 (5056) Natural'. Natural (appears white), rotationally moulded PE material. For use with water up to 85°C.

Section:: 5245 Polyethylene
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 241155011
Expiry date:: 30/11/2029

Approval Holder:: Matrix Polymers Ltd.

Company Name
Matrix Polymers Ltd.
Address
Unit 2, Spindus Road, Compass Industrial Park, Speke, Liverpool
Postcode
L24 1YA
Phone
+44 (0) 604 641640 Fax: 01604 497744
General Email
sales@matrixpolymers.com

View All Listings by this Company

WRAS Approval Number: #241055055

'DIC.PPS Z-230-T5 BLACK'. Black coloured, injection moulded PPS material. For use with water up to 85°C.

Section:: 5255 Polyphenylene Sulphide (PPS)
Expiry date:: 31/10/2029

Approval Holder:: DIC Corporation

Company Name
DIC Corporation
Address
12, Yawata-kaigandori, Ichihara, 290-8585
Country
Japan

View All Listings by this Company