Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2303536

‘MasterProtect® 180’. Site applied, grey coloured, two-component epoxy coating consisting of Part A (grey coloured liquid) and Part B (colourless liquid). Mix Part A and Part B in a mass ratio of 87:13 and apply as per manufacturer's TDS 'MBS_CC-UAE/Pr_180/ /03_23'. Cure coat 1 for 36 hours@20°C. Cure coat 2 for 21 days@20°C. For use with water up to 40°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5042 Coatings, Paints & Linings
Section Subtitle:: Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 2303536
Expiry date:: 31/03/2028

Approval Holder:: Master Builders Solutions Construction Chemicals LLC

Company Name
Master Builders Solutions Construction Chemicals LLC
Address
PO Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai
Country
United Arab Emirates

View All Listings by this Company

WRAS Approval Number: #2303518

'ELEC GRP PIPE B'. Yellow coloured GRP pipe manufactured by filament winding. For use with water up to 60°C.

Section:: 5120 Glass Reinforced Plastics (GRP)
Section Subtitle:: Components.
WRAS Approval Number:: 2303518
Expiry date:: 31/03/2028

Approval Holder:: ELEC Systems Co., Ltd.

Company Name
ELEC Systems Co., Ltd.
Address
Unit 01, 15/F., Yuen Long Trading Centre, 33 Wang Yip Street West, Yuen Long, N.T.
Country
Hong Kong

View All Listings by this Company

WRAS Approval Number: #2303521

'SHUANGSHI GRP PIPE 51160'. Yellow coloured GRP pipe manufactured by filament winding. For use with water up to 60°C.

Section:: 5120 Glass Reinforced Plastics (GRP)
Section Subtitle:: Components.
WRAS Approval Number:: 2303521
Expiry date:: 31/03/2028

Approval Holder:: Jiangxi Shuangshi Technology Co., Ltd.

Company Name
Jiangxi Shuangshi Technology Co., Ltd.
Address
North Zone, Shangyou Industrial Park, Huangbu Town, Shangyou County, Ganzhou City, Jiangxi Province
Country
China

View All Listings by this Company

WRAS Approval Number: #2302561

'PROTEAN Silicone Paste'. white coloured (translucent) silicone grease. Apply as per manufacturer's instructions. For use with water up to 65°C.

Section:: 5160 Lubricants
Expiry date:: 29/02/2028

Approval Holder:: Tygris Ltd.

Company Name
Tygris Ltd.
Address
Unit 31 Kyle Road, Irvine Industrial Estate, Irvine, North Ayrshire
Postcode
KA12 8LE

View All Listings by this Company

WRAS Approval Number: #2303538

'Denyl 66 3010 Natural F' & 'Denyl 66 3010 Black F'. Natural (appears off-white) and black coloured, injection moulded, Polyamide 66 materials. For use with water up to 65°C.

Section:: 5180 Nylon
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2303538
Expiry date:: 31/03/2028

Approval Holder:: Vamp-Tech S.p.A

Company Name
Vamp-Tech S.p.A
Address
Via delle Industrie 10/12, Busnago (MB), 20874
Country
Italy

View All Listings by this Company

WRAS Approval Number: #2304528

'EPLAMID 66 GFS 30 FW NC'. Natural (appears beige), injection moulded, glass fibre reinforced PA66 material. For use with water up to 85°C.

Section:: 5180 Nylon
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2304528
Expiry date:: 30/04/2028

Approval Holder:: Epsan Plastik San Ve Tic A.S.

Company Name
Epsan Plastik San Ve Tic A.S.
Address
DOSAB A.O.S. Cd. No:16 Bursa, 16369
Country
Turkey

View All Listings by this Company

WRAS Approval Number: #2306503

'EPLAMID 66 GFS 30 FW BK'. Black coloured, injection moulded, glass reinforced PA66 material. For use with water up to 85°C.

Section:: 5180 Nylon
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2306503
Expiry date:: 30/06/2028

Approval Holder:: Epsan Plastik San Ve Tic A.S.

Company Name
Epsan Plastik San Ve Tic A.S.
Address
DOSAB A.O.S. Cd. No:16 Bursa, 16369
Country
Turkey

View All Listings by this Company

WRAS Approval Number: #2303531

'TEGA PE100 fittings'. Black coloured, injection moulded PE100 fittings. For use with water up to 60°C.

Section:: 5240 Polyethylene
Section Subtitle:: Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:: 2303531
Expiry date:: 31/03/2028

Approval Holder:: Tega Muhendislik Sanayi & Ticaret A.S. (Tega Engineering Industry & Trade Inc.)

Company Name
Tega Muhendislik Sanayi & Ticaret A.S. (Tega Engineering Industry & Trade Inc.)
Address
1. OSB Ural Caddesi, No:9 06930, Sincan/Ankara
Country
Turkey

View All Listings by this Company

WRAS Approval Number: #2303542

'Stars Water Tank Panel'. Multi-layered, roto-moulded LLDPE/PE foam panel comprising of a white (opaque) water contact layer, off-white (translucent) second layer, black (opaque) third layer and white (opaque) outer layer. For use with water up to 65°C.

Section:: 5240 Polyethylene
Section Subtitle:: Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:: 2303542
Expiry date:: 31/03/2028

Approval Holder:: Stars Poly Storage Tanks Factory L.L.C

Company Name
Stars Poly Storage Tanks Factory L.L.C
Address
Al Quoze Industrial Area 4, Dubai
Country
United Arab Emirates

View All Listings by this Company

WRAS Approval Number: #2304509

'DERINSU PE100 Fitting'. Black coloured, injection moulded PE100 fitting. For use with water up to 60°C.

Section:: 5240 Polyethylene
Section Subtitle:: Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:: 2304509
Expiry date:: 30/04/2028

Approval Holder:: Derinsu Boru Ekparca Ve Makine Hafr. Ins. Tafr. Ins. Taah. Hird. Tic. Ve San. Ltd. Sti.

Company Name
Derinsu Boru Ekparca Ve Makine Hafr. Ins. Tafr. Ins. Taah. Hird. Tic. Ve San. Ltd. Sti.
Address
Yenidogan Mh. Demirciler Sitesi 2108, Sk. No:22, Yuregir, TR-01 01310
Country
Turkey

View All Listings by this Company