Directory Search Results

Print List

#2112049

Single-hole, single outlet, swivel electronically controlled tap assembly with a brass body in various finishes (see model). Flow is controlled by a solenoid valve activated via an infra-red sensor and a ceramic cartridge with a single lever operating member controlling both the flow and temperature. The spout outlet incorporates a pull-out spray with a plastic aerator. The inlets incorporate approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2), and a stainless-steel strainer Maximum working pressure 5 bar. Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2112049
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection attached to check valve bodies with 1/2" BSP female inlets
Marking:
Lota on operating member
Installation Requirements:
R001 R009 R090
Expiry date:
31/12/2026
Model:
63391-01X X Denotes the difference in surface finish; 01 - Chrome 6801 - Matt Black 4408 - Brushed Brass 0402 - Brushed Nickel PVD 5804 - Heirloom Silver 08 - Stainless Steel 04 - Brushed Nickel
Product Images

Approval Holder:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen lota international co. ltd
Company Name
Xiamen lota international co. ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#2109063

Range of WC flushing cisterns incorporating a BS 1212-4 (2016) side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres or 4.5/3 litre flush volumes. The cistern is operated by a manual push button and the product incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2109063
Size:
15mm Compression
Marking:
Noken Porcelanosa, model and flushing volumes inside of cistern. Noken on operating buttons.
Installation Requirements:
R001 R556
Expiry date:
30/09/2026
Model:
100294206 & 100294199 WC CISTERN

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#2106050

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2106050
Size:
1/2” BSP (M).
Marking:
NOKEN & SMARTLINE ON FRONT OF CISTERN NOKEN, MODEL & FLUSH VOLUME ON INSIDE OF CISTERN
Installation Requirements:
R001 R556
Expiry date:
30/06/2026
Model:
100294223 3-4.5 Ltr. 100294207 3-4.5 Ltr. 100294230 3-6Ltr. 100294216 3-6Ltr.

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#2201033

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Incorporating a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2201033
Size:
½” BSP (M).
Marking:
Geberit on cistern and operating members. 6 litre mark in cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2027
Model:
Geberit Sigma 12cm concealed cistern 6/3 litres and Duofix wall frames: 109.309.00.5 Cistern only with push fit flush pipe, 111.352.00.5 Wall frame with cistern H112cm, less abled installation, 111.384.00.5 Wall frame with cistern H112cm, 111.383.00.5 Wall frame with cistern H112cm, wall anchors & connection bend, 111.911.00.5 Wall frame with cistern H98cm, wall anchors & connection bend. Models added July 2023: 111.383.00.3, 111.911.00.3.
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2107109

Range of floor mounted, single hole, single outlet (fixed), combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator (SH-T9050N model) or a plastic flow straightener (all other models). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0675 Combination Tap Assemblies
Section Subtitle:
Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2107109
Note:
This approval does not include a shower hose and handset.
Size:
M12 (F)
Marking:
QIXI and WRAS on base plate.
Installation Requirements:
R001 R020
Expiry date:
31/07/2026
Model:
SH-T8170BN, SH-T8530M, SH-T8810M, SH-T9050N.

Approval Holder:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company
Manufacturer:
Zhejiang Qixi Sanitary Co., Ltd
Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326
General Email
syyzhuang@coralbathroom.com

View All Listings by this Company

Print This Approval


#2203340

Range of in-line non-verifiable single check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a brushed chrome DZR brass body. For use with copper pipe EN1057. Fitting also incorporates a stainless steel strainer For maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2203340
Size:
see model
Marking:
A(Altenic logo) & CR on body.
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
AI-09DZR5 - 15mm compression x ¾” captive nut. AI-09DZR2 - 22mm compression x 1” captive nut. AI-09DZR4 - 22mm compression x 1” captive nut AI-09DZR5L - 15mm compression x 3/4" captive nut AI-09DZR4L - 22mm compression x 1" captive nut Model added July 2022 AI-09DZR2 - 28mm compression x 1¼”captive nut.
Product Images

Approval Holder:
Altecnic Limited
Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company
Manufacturer:
Airaga Rubinetterie Spa
Company Name
Airaga Rubinetterie Spa
Address
Via Per Briga 42 28024 Gozzano Novara
Country
Italy
General Email

View All Listings by this Company

Print This Approval


#2203326

Double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body. For use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2203326
Size:
15 & 22 compression
Marking:
Ningbo Dien, size, CR, flow arrow, WRAS & date of manufauctuer (MM/YY) on body
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
DIEN-DCV15 DIEN-DCV22
Product Images

Approval Holder:
Ningbo Dien Trade Co. Ltd.
Company Name
Ningbo Dien Trade Co. Ltd.
Address
UILDING 11 SHUXIANG JINGYUAN YINZHOU DISTRICT
Country
China

View All Listings by this Company

Print This Approval


#2201067

‘Polytank’ wholesome water kit for use with water storage cisterns for domestic purposes. The products have black plastic bodies and consist of a warning pipe elbow incorporating a (white plastic) screen, breather incorporating a (white plastic) screen, vent pipe incorporating a (white plastic) screen, dip tube, plastic washer and backplate. Cold water use only.

Section:
0085 Wholesome water kits for use with cold water storage
Section Subtitle:
Wholesome water kits for use with Cold water storage cisterns to comply with Schedule 2. Section 7, Paragraph 4. of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
2201067
Note:
The BL30/1 SWPE (natural) plastic backnut washer must be installed externally of the cistern.
Size:
BL30/1: ¾" BSP (M)/22mm compression. BL30/2 & BL30/3: ¾" BSP (M).
Marking:
Polytank and model on body.
Installation Requirements:
R001 R008
Expiry date:
31/01/2027
Model:
BL30/1 screened waring pipe elbow. BL30/2 screened breather. BL30/3 screened vent. BL30/4 dip tube. BL30/5 polypropylene washer. BL30/7 polypropylene backplate.
Product Images

Approval Holder:
Polytank Group Ltd
Company Name
Polytank Group Ltd
Address
Naze Lane East Freckleton Preston
Postcode
PR4 1UN
Phone
+44 (0) 1772 632850
General Email
sales@polytank.co.uk

View All Listings by this Company

Print This Approval


#2203046

Single hole, single outlet (fixed, with swivel nozzle) bidet combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
2203046
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided, PEX lined flexible hoses with 3/8" captive nut end connections.
Marking:
AXOR on body - 39 201 XXX Rhombic cut AXOR on operating member - AXOR Citterio 39 214 XXX
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2027
Model:
AXOR Citterio 39 214 XXX & 39 201 XXX Rhombic cut Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2203359

Range of single hole, single outlet (fixed) over the rim (swivel nozzle) bidet combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
2203359
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Axor (brand name of Hansgrohe SE) on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2027
Model:
48 210 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 269 of 1135

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.